Job Description Job Description Calyxo, Inc. is a medical device company headquartered in Pleasanton, California, USA. The company was founded in 2016 to address the profound need for improved kidney stone treatment. Kidney stone disease is a common, painful condition that consumes vast amounts of healthcare resources each year. Our team is led by executives and investors with a proven track record of commercializing paradigm-shifting devices to meet unmet needs within urology. Are you ready to change the future of kidney stone treatment? We are seeking high achievers who want to be part of a dynamic team working in a fun, diverse atmosphere. Summary: We are seeking a highly skilled and innovative hardware engineer to lead development of advanced fluidic subsystems in kidney stone treatment. This role focuses on the design and control of irrigation and aspiration systems, combining pumps, valves, sensors, tubing sets, and embedded software into safe and reliable products. This is a hands on technical leadership role for an engineer who enjoys developing both hardware and control algorithms, working across mechanical, electrical, and software boundaries to deliver clinically robust performance. This role requires ensuring that all engineering efforts comply with industry standards and regulatory requirements, while aligning with strategic business objectives. In This Role, You Will: Own and architect end-to-end fluid control systems across capital equipment and disposable instruments/tubing sets. Define and drive development of control algorithms to regulate irrigation and aspiration under varying clinical and patient conditions. Define system/sub-system performance requirements for flow, pressure, responsiveness, alarms, and fault detection. Perform system modeling, trade studies, prototyping and bench testing to educate key component selection (pumps, sensors, actuators), validate decisions and de-risk technical challenges. Individually contribute to mechanical/electromechanical design for critical fluidics subsystem components and assemblies and provide expert design review of other team-members designs. Lead cross-functional alignment across internal teams and external partners to ensure architectural integrity, V&V readiness, and production scalability. Collaborate with Systems & Test Engineering to drive design verification test planning and execution for fluid control hardware subsystems. Lead hardware sub-system risk management activities (e.g., FMEA). Organize system/sub-system-level technical design reviews to ensure coherent design across hardware, firmware and software interfaces. Collaborate with suppliers and internal operations representatives to perform root cause investigation, component lifecycle management and continuous improvement. Provide deep subject matter expertise toward the technology roadmap for fluidics and controls and related research endeavors. Partner closely with mechanical, electrical, software, systems, clinical, quality, regulatory and other cross-functional teams to bring prototypes to the market. Mentor junior and non-specialist engineering talent, promoting a collaborative and high-performance work environment. Who You Will Report To: Director, Vision and Sensor Systems Requirements: Bachelor's degree in Mechanical Engineering, Biomedical Engineering, Electrical Engineering, Mechatronics, or a related discipline. Master's or PhD in a relevant engineering discipline preferred. 15+ years of experience developing fluidic, mechatronic, or control systems in a regulated product environment. Experience with owning end-to-end hardware system architectures for fluidic control systems. Preferred familiarity with disposable fluidic component design and reusable/disposable system interfaces. Proven experience developing and tuning closed loop control systems for electromechanical hardware. Preferred experience with irrigation and aspiration systems, endoscopic or urological devices, or surgical fluid management platforms. Experience with pressure, flow, air in line, or occlusion detection preferred. Experience prototyping and testing systems at the bench and subsystem level, including proficiency with prototype embedded software development (e.g., C/C++, Python, or similar) to support hardware designs. Strong first-principles thinker with expert-level fundamentals in fluid dynamics applied to precision fluid delivery in complex devices. Ability to design experiments, analyze data, and translate results into design improvements. Clear technical communication skills and ability to influence across multidisciplinary teams. Experience leading external vendors and contract development firms. Exceptional structured problem-solving skills and experience leading multifunctional technical project teams through all development lifecycle phases. Prior work on medical devices or other safety critical products, including knowledge of IEC 60601, ISO 13485, and medical device design controls. Experience in requirements definition, design reviews, design verification, change management and risk control Ability to travel domestically and internationally up to 10% of the time. What We Offer: At Calyxo, you will be part of a knowledgeable, high-achieving, experienced, and fun team. You will work in a diverse work environment with experienced, proven leaders and have an opportunity to shape our company culture. You will experience constant learning and dynamic challenges to help you grow and be the best version of yourself. We also offer an attractive compensation package, which includes: A competitive base salary of $250,000 - $270,000 and variable incentive plan Stock options - ownership and a stake in growing a mission-driven company Employee benefits package that includes 401(k), healthcare insurance and paid vacation Calyxo is deeply committed to fostering an environment where diversity and inclusion are not only valued but also prioritized. We believe a diverse and inclusive community empowers us to act courageously, care deeply, and dream boldly to impact people in big ways. Diverse viewpoints bring diverse capabilities, which strengthen our focus and fuel our growth. Calyxo is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other applicable legally protected characteristics Legal authorization to work in the United States is required. In compliance with federal law, all persons hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Disclaimer: At Calyxo, we prioritize a transparent and structured interview process to ensure the best fit for both our candidates and our team. Please be aware of the following: Structured Interview Process : Our hiring process includes multiple stages of interviews where you will have the opportunity to communicate directly with Calyxo employees. This ensures that you gain a comprehensive understanding of the role and our company culture. Verification of Identity : We do not extend job offers without first meeting candidates, either virtually or in person. This step is crucial to maintain the integrity of our hiring process and to ensure mutual alignment. Beware of Scams : Calyxo will never request sensitive personal information, such as your full name, address, phone number, or identification documents, via email or online forms before an official interview. Calyxo representatives will always contact you using an email format of . If you receive a request for information from any other domain, please contact us directly at to verify the legitimacy of the communication. We appreciate your interest in joining Calyxo and look forward to getting to know you through our official channels.
09/26/2026
Full time
Job Description Job Description Calyxo, Inc. is a medical device company headquartered in Pleasanton, California, USA. The company was founded in 2016 to address the profound need for improved kidney stone treatment. Kidney stone disease is a common, painful condition that consumes vast amounts of healthcare resources each year. Our team is led by executives and investors with a proven track record of commercializing paradigm-shifting devices to meet unmet needs within urology. Are you ready to change the future of kidney stone treatment? We are seeking high achievers who want to be part of a dynamic team working in a fun, diverse atmosphere. Summary: We are seeking a highly skilled and innovative hardware engineer to lead development of advanced fluidic subsystems in kidney stone treatment. This role focuses on the design and control of irrigation and aspiration systems, combining pumps, valves, sensors, tubing sets, and embedded software into safe and reliable products. This is a hands on technical leadership role for an engineer who enjoys developing both hardware and control algorithms, working across mechanical, electrical, and software boundaries to deliver clinically robust performance. This role requires ensuring that all engineering efforts comply with industry standards and regulatory requirements, while aligning with strategic business objectives. In This Role, You Will: Own and architect end-to-end fluid control systems across capital equipment and disposable instruments/tubing sets. Define and drive development of control algorithms to regulate irrigation and aspiration under varying clinical and patient conditions. Define system/sub-system performance requirements for flow, pressure, responsiveness, alarms, and fault detection. Perform system modeling, trade studies, prototyping and bench testing to educate key component selection (pumps, sensors, actuators), validate decisions and de-risk technical challenges. Individually contribute to mechanical/electromechanical design for critical fluidics subsystem components and assemblies and provide expert design review of other team-members designs. Lead cross-functional alignment across internal teams and external partners to ensure architectural integrity, V&V readiness, and production scalability. Collaborate with Systems & Test Engineering to drive design verification test planning and execution for fluid control hardware subsystems. Lead hardware sub-system risk management activities (e.g., FMEA). Organize system/sub-system-level technical design reviews to ensure coherent design across hardware, firmware and software interfaces. Collaborate with suppliers and internal operations representatives to perform root cause investigation, component lifecycle management and continuous improvement. Provide deep subject matter expertise toward the technology roadmap for fluidics and controls and related research endeavors. Partner closely with mechanical, electrical, software, systems, clinical, quality, regulatory and other cross-functional teams to bring prototypes to the market. Mentor junior and non-specialist engineering talent, promoting a collaborative and high-performance work environment. Who You Will Report To: Director, Vision and Sensor Systems Requirements: Bachelor's degree in Mechanical Engineering, Biomedical Engineering, Electrical Engineering, Mechatronics, or a related discipline. Master's or PhD in a relevant engineering discipline preferred. 15+ years of experience developing fluidic, mechatronic, or control systems in a regulated product environment. Experience with owning end-to-end hardware system architectures for fluidic control systems. Preferred familiarity with disposable fluidic component design and reusable/disposable system interfaces. Proven experience developing and tuning closed loop control systems for electromechanical hardware. Preferred experience with irrigation and aspiration systems, endoscopic or urological devices, or surgical fluid management platforms. Experience with pressure, flow, air in line, or occlusion detection preferred. Experience prototyping and testing systems at the bench and subsystem level, including proficiency with prototype embedded software development (e.g., C/C++, Python, or similar) to support hardware designs. Strong first-principles thinker with expert-level fundamentals in fluid dynamics applied to precision fluid delivery in complex devices. Ability to design experiments, analyze data, and translate results into design improvements. Clear technical communication skills and ability to influence across multidisciplinary teams. Experience leading external vendors and contract development firms. Exceptional structured problem-solving skills and experience leading multifunctional technical project teams through all development lifecycle phases. Prior work on medical devices or other safety critical products, including knowledge of IEC 60601, ISO 13485, and medical device design controls. Experience in requirements definition, design reviews, design verification, change management and risk control Ability to travel domestically and internationally up to 10% of the time. What We Offer: At Calyxo, you will be part of a knowledgeable, high-achieving, experienced, and fun team. You will work in a diverse work environment with experienced, proven leaders and have an opportunity to shape our company culture. You will experience constant learning and dynamic challenges to help you grow and be the best version of yourself. We also offer an attractive compensation package, which includes: A competitive base salary of $250,000 - $270,000 and variable incentive plan Stock options - ownership and a stake in growing a mission-driven company Employee benefits package that includes 401(k), healthcare insurance and paid vacation Calyxo is deeply committed to fostering an environment where diversity and inclusion are not only valued but also prioritized. We believe a diverse and inclusive community empowers us to act courageously, care deeply, and dream boldly to impact people in big ways. Diverse viewpoints bring diverse capabilities, which strengthen our focus and fuel our growth. Calyxo is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other applicable legally protected characteristics Legal authorization to work in the United States is required. In compliance with federal law, all persons hired will be required to verify their identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Disclaimer: At Calyxo, we prioritize a transparent and structured interview process to ensure the best fit for both our candidates and our team. Please be aware of the following: Structured Interview Process : Our hiring process includes multiple stages of interviews where you will have the opportunity to communicate directly with Calyxo employees. This ensures that you gain a comprehensive understanding of the role and our company culture. Verification of Identity : We do not extend job offers without first meeting candidates, either virtually or in person. This step is crucial to maintain the integrity of our hiring process and to ensure mutual alignment. Beware of Scams : Calyxo will never request sensitive personal information, such as your full name, address, phone number, or identification documents, via email or online forms before an official interview. Calyxo representatives will always contact you using an email format of . If you receive a request for information from any other domain, please contact us directly at to verify the legitimacy of the communication. We appreciate your interest in joining Calyxo and look forward to getting to know you through our official channels.
Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role Critical to achieving K2's vision is deploying our 20-kW high-power spacecraft platform at scale across MEO, GEO, cis-lunar, and deep space. Realizing that vision means actively controlling the heat generated by the high-power payloads our platform hosts. This requires active thermal control systems such as pumped fluid loops, built from fluid turbomachinery, valves, accumulators, and pressure and temperature instrumentation. Scaling to constellations requires someone who can span the mechanical, fluid, electromechanical, and thermal-fluid domains and collaborate closely with the thermal, avionics, software, and production teams to deliver these systems at rate. As Principal Turbomachinery Engineer, you will define how K2 designs, analyzes, manufactures, tests, integrates, and deploys precision turbomachinery for integration into active thermal control systems. You will own these unique pieces of turbomachinery from concept through integration and rate production. You will be responsible for mission-critical hardware which goes to space. Responsibilities Responsible for turbomachinery mechanisms in the spacecraft active thermal control system, including: Architectural down-selection, design, and tolerancing Pump- and mechanism-specific analyses (rotor dynamics, bearings and seals, hydraulic performance, structural, thermal-fluid) Environmental test and qualification plans Ground- and in-flight performance validation plans Supply chain and high-volume manufacturing trades Partner with the thermal and platform architecture teams to scope the long-term K2 pumped-fluid-loop roadmap, and system performance requirements Collaborate with thermal, structures, avionics, and satellite bus teams to determine optimal operations and requirements for the pump, supporting mechanisms, and broader fluid loop Prepare design reviews to secure stakeholder buy-in and communicate expectations across hardware, software, test, and manufacturing teams Own and refine program deliverables and schedules throughout development and production Evaluate and select manufacturing equipment for specialty processes (impeller machining, rotating-assembly balancing, leak/flow test) Partner with production to develop work instructions, in-process checkouts, and end-of-line tests Qualifications Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline 8+ years of experience with mechanical and/or electromechanical design and analysis 2+ years of experience design and analysis of turbomachinery in harsh environments Experience with CAD or FEA software packages Nice to Have Experience designing, building, and testing centrifugal or axial pumps for closed-loop thermal systems, including impeller geometry, volute/diffuser design, and hydraulic performance prediction Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies Experience with bearing analysis, preload techniques, and preload measurement Experience with the practical application of GD&T Demonstrated ability to own moving mechanism assemblies across the full product lifecycle in a high velocity environment Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations Independent and self-motivated mindset, with strong organizational, written, and oral communication skills across disciplines Compensation and Benefits: Base salary range for this role is $175,000 - $200,000 + equity in the company Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
09/26/2026
Full time
Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role Critical to achieving K2's vision is deploying our 20-kW high-power spacecraft platform at scale across MEO, GEO, cis-lunar, and deep space. Realizing that vision means actively controlling the heat generated by the high-power payloads our platform hosts. This requires active thermal control systems such as pumped fluid loops, built from fluid turbomachinery, valves, accumulators, and pressure and temperature instrumentation. Scaling to constellations requires someone who can span the mechanical, fluid, electromechanical, and thermal-fluid domains and collaborate closely with the thermal, avionics, software, and production teams to deliver these systems at rate. As Principal Turbomachinery Engineer, you will define how K2 designs, analyzes, manufactures, tests, integrates, and deploys precision turbomachinery for integration into active thermal control systems. You will own these unique pieces of turbomachinery from concept through integration and rate production. You will be responsible for mission-critical hardware which goes to space. Responsibilities Responsible for turbomachinery mechanisms in the spacecraft active thermal control system, including: Architectural down-selection, design, and tolerancing Pump- and mechanism-specific analyses (rotor dynamics, bearings and seals, hydraulic performance, structural, thermal-fluid) Environmental test and qualification plans Ground- and in-flight performance validation plans Supply chain and high-volume manufacturing trades Partner with the thermal and platform architecture teams to scope the long-term K2 pumped-fluid-loop roadmap, and system performance requirements Collaborate with thermal, structures, avionics, and satellite bus teams to determine optimal operations and requirements for the pump, supporting mechanisms, and broader fluid loop Prepare design reviews to secure stakeholder buy-in and communicate expectations across hardware, software, test, and manufacturing teams Own and refine program deliverables and schedules throughout development and production Evaluate and select manufacturing equipment for specialty processes (impeller machining, rotating-assembly balancing, leak/flow test) Partner with production to develop work instructions, in-process checkouts, and end-of-line tests Qualifications Bachelor's degree in mechanical, aerospace, or other relevant engineering discipline 8+ years of experience with mechanical and/or electromechanical design and analysis 2+ years of experience design and analysis of turbomachinery in harsh environments Experience with CAD or FEA software packages Nice to Have Experience designing, building, and testing centrifugal or axial pumps for closed-loop thermal systems, including impeller geometry, volute/diffuser design, and hydraulic performance prediction Experience with NASA-STD-5017, SMC-S-016, and GSFC-STD-7000 for the design and qualification of in-space Moving Mechanism Assemblies Experience with bearing analysis, preload techniques, and preload measurement Experience with the practical application of GD&T Demonstrated ability to own moving mechanism assemblies across the full product lifecycle in a high velocity environment Demonstrated understanding of structural analysis and failure modes of complex mechanical systems in space environments and operations Independent and self-motivated mindset, with strong organizational, written, and oral communication skills across disciplines Compensation and Benefits: Base salary range for this role is $175,000 - $200,000 + equity in the company Salary and level will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
BlackTree Technical Group, Inc.
Billerica, Massachusetts
Job Description Job Description Test Executor - Contract Job Summary: The Test Executor will work as part of a multidisciplinary technical team to test, operate, set up testing infrastructure, and maintain complex robotic and electromechanical systems. This role will support day-to-day testing operations, primarily in an indoor environment. Responsibilities will include preparing systems for testing, operating cameras and other testing equipment, communicating system status to engineers and technicians, setting up testing environments, and supporting general test operations. This position includes a significant hands-on and physical component. Key Responsibilities: Perform software and hardware testing on robotic and electromechanical systems, documenting test results, findings, and issues. Collaborate with software quality, service, and engineering teams to troubleshoot and resolve hardware and software issues. Accurately complete test documentation and maintain detailed records in accordance with established procedures. Support demonstrations and presentations of systems for customers and visitors. Work with software, hardware, and systems engineering teams to improve testing processes and procedures. Track test activities, issues, and results using standard documentation and project management tools. Handle and stack boxes or equipment weighing up to 50 lbs. Required SkillsTechnical Skills: Technical knowledge and hands-on experience with electronics. Comfortable working with a variety of user interfaces, controllers, and technical equipment. Experience using common productivity, communication, and task-management software. Strong troubleshooting and problem-solving abilities. Ability to quickly learn new technical terminology, concepts, and procedures. Experience performing software and hardware testing. Ability to identify, document, and communicate defects, failures, and anomalies. Essential Skills: Strong verbal and written communication skills. Excellent organizational and documentation abilities. Ability to work independently with minimal supervision while collaborating effectively with a broader technical team. Strong attention to detail and commitment to accuracy. Strong customer-service orientation when supporting internal and external stakeholders. Adaptability and willingness to handle a variety of technical and administrative tasks. Comfortable working in a hands-on testing environment. Preferred Skills: Experience working with Linux or similar technical operating systems. Experience operating forklifts, scissor lifts, walkie stackers, or similar equipment. Previous experience testing finished products, identifying defects, and debugging failures or anomalies. Experience with graphics or design software and basic visual communication concepts. Experience working in manufacturing, robotics, or other technical production environments. Familiarity with manufacturing processes, quality control systems, or industry standards. Travel & Transportation: Reliable transportation is required. Occasional travel may be required, up to approximately 10%. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers.
09/25/2026
Full time
Job Description Job Description Test Executor - Contract Job Summary: The Test Executor will work as part of a multidisciplinary technical team to test, operate, set up testing infrastructure, and maintain complex robotic and electromechanical systems. This role will support day-to-day testing operations, primarily in an indoor environment. Responsibilities will include preparing systems for testing, operating cameras and other testing equipment, communicating system status to engineers and technicians, setting up testing environments, and supporting general test operations. This position includes a significant hands-on and physical component. Key Responsibilities: Perform software and hardware testing on robotic and electromechanical systems, documenting test results, findings, and issues. Collaborate with software quality, service, and engineering teams to troubleshoot and resolve hardware and software issues. Accurately complete test documentation and maintain detailed records in accordance with established procedures. Support demonstrations and presentations of systems for customers and visitors. Work with software, hardware, and systems engineering teams to improve testing processes and procedures. Track test activities, issues, and results using standard documentation and project management tools. Handle and stack boxes or equipment weighing up to 50 lbs. Required SkillsTechnical Skills: Technical knowledge and hands-on experience with electronics. Comfortable working with a variety of user interfaces, controllers, and technical equipment. Experience using common productivity, communication, and task-management software. Strong troubleshooting and problem-solving abilities. Ability to quickly learn new technical terminology, concepts, and procedures. Experience performing software and hardware testing. Ability to identify, document, and communicate defects, failures, and anomalies. Essential Skills: Strong verbal and written communication skills. Excellent organizational and documentation abilities. Ability to work independently with minimal supervision while collaborating effectively with a broader technical team. Strong attention to detail and commitment to accuracy. Strong customer-service orientation when supporting internal and external stakeholders. Adaptability and willingness to handle a variety of technical and administrative tasks. Comfortable working in a hands-on testing environment. Preferred Skills: Experience working with Linux or similar technical operating systems. Experience operating forklifts, scissor lifts, walkie stackers, or similar equipment. Previous experience testing finished products, identifying defects, and debugging failures or anomalies. Experience with graphics or design software and basic visual communication concepts. Experience working in manufacturing, robotics, or other technical production environments. Familiarity with manufacturing processes, quality control systems, or industry standards. Travel & Transportation: Reliable transportation is required. Occasional travel may be required, up to approximately 10%. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers.
BlackTree Technical Group, Inc.
Billerica, Massachusetts
Job Description Job Description Test Executor - Contract Job Summary: The Test Executor will work as part of a multidisciplinary technical team to test, operate, set up testing infrastructure, and maintain complex robotic and electromechanical systems. This role will support day-to-day testing operations, primarily in an indoor environment. Responsibilities will include preparing systems for testing, operating cameras and other testing equipment, communicating system status to engineers and technicians, setting up testing environments, and supporting general test operations. This position includes a significant hands-on and physical component. Key Responsibilities: Perform software and hardware testing on robotic and electromechanical systems, documenting test results, findings, and issues. Collaborate with software quality, service, and engineering teams to troubleshoot and resolve hardware and software issues. Accurately complete test documentation and maintain detailed records in accordance with established procedures. Support demonstrations and presentations of systems for customers and visitors. Work with software, hardware, and systems engineering teams to improve testing processes and procedures. Track test activities, issues, and results using standard documentation and project management tools. Handle and stack boxes or equipment weighing up to 50 lbs. Required SkillsTechnical Skills: Technical knowledge and hands-on experience with electronics. Comfortable working with a variety of user interfaces, controllers, and technical equipment. Experience using common productivity, communication, and task-management software. Strong troubleshooting and problem-solving abilities. Ability to quickly learn new technical terminology, concepts, and procedures. Experience performing software and hardware testing. Ability to identify, document, and communicate defects, failures, and anomalies. Essential Skills: Strong verbal and written communication skills. Excellent organizational and documentation abilities. Ability to work independently with minimal supervision while collaborating effectively with a broader technical team. Strong attention to detail and commitment to accuracy. Strong customer-service orientation when supporting internal and external stakeholders. Adaptability and willingness to handle a variety of technical and administrative tasks. Comfortable working in a hands-on testing environment. Preferred Skills: Experience working with Linux or similar technical operating systems. Experience operating forklifts, scissor lifts, walkie stackers, or similar equipment. Previous experience testing finished products, identifying defects, and debugging failures or anomalies. Experience with graphics or design software and basic visual communication concepts. Experience working in manufacturing, robotics, or other technical production environments. Familiarity with manufacturing processes, quality control systems, or industry standards. Travel & Transportation: Reliable transportation is required. Occasional travel may be required, up to approximately 10%. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers.
09/25/2026
Full time
Job Description Job Description Test Executor - Contract Job Summary: The Test Executor will work as part of a multidisciplinary technical team to test, operate, set up testing infrastructure, and maintain complex robotic and electromechanical systems. This role will support day-to-day testing operations, primarily in an indoor environment. Responsibilities will include preparing systems for testing, operating cameras and other testing equipment, communicating system status to engineers and technicians, setting up testing environments, and supporting general test operations. This position includes a significant hands-on and physical component. Key Responsibilities: Perform software and hardware testing on robotic and electromechanical systems, documenting test results, findings, and issues. Collaborate with software quality, service, and engineering teams to troubleshoot and resolve hardware and software issues. Accurately complete test documentation and maintain detailed records in accordance with established procedures. Support demonstrations and presentations of systems for customers and visitors. Work with software, hardware, and systems engineering teams to improve testing processes and procedures. Track test activities, issues, and results using standard documentation and project management tools. Handle and stack boxes or equipment weighing up to 50 lbs. Required SkillsTechnical Skills: Technical knowledge and hands-on experience with electronics. Comfortable working with a variety of user interfaces, controllers, and technical equipment. Experience using common productivity, communication, and task-management software. Strong troubleshooting and problem-solving abilities. Ability to quickly learn new technical terminology, concepts, and procedures. Experience performing software and hardware testing. Ability to identify, document, and communicate defects, failures, and anomalies. Essential Skills: Strong verbal and written communication skills. Excellent organizational and documentation abilities. Ability to work independently with minimal supervision while collaborating effectively with a broader technical team. Strong attention to detail and commitment to accuracy. Strong customer-service orientation when supporting internal and external stakeholders. Adaptability and willingness to handle a variety of technical and administrative tasks. Comfortable working in a hands-on testing environment. Preferred Skills: Experience working with Linux or similar technical operating systems. Experience operating forklifts, scissor lifts, walkie stackers, or similar equipment. Previous experience testing finished products, identifying defects, and debugging failures or anomalies. Experience with graphics or design software and basic visual communication concepts. Experience working in manufacturing, robotics, or other technical production environments. Familiarity with manufacturing processes, quality control systems, or industry standards. Travel & Transportation: Reliable transportation is required. Occasional travel may be required, up to approximately 10%. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers. Company Description BlackTree Technical Group is a full-service staffing and recruitment firm. Our team consists of an experienced group of Senior Technical Recruiters and Account Managers with over 40 years of industry experience. Our firm prides itself on our technical knowledge, innovative sourcing strategies, and most importantly, a long-standing record of proven results for both clients and job-seekers.
Mid-Continent Instruments and Avionics
Leoti, Kansas
Job Description Job Description You must be a U.S. citizen to apply for this position COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Program Engineer, you will lead the technical interface between sales account managers and design engineers to secure programs and provide aftermarket support to customers. Programs include new product development and existing product qualification and certification efforts for aviation products such as cockpit avionics, power conversion equipment, and battery systems. To be successful in this role, you will need to effectively collaborate with cross-functional teams and external customers. THIS POSITION MAY BE FOR YOU IF You are a U.S. Citizen. You have a Bachelor of Science in Electrical, Mechanical or related engineering field. You have a minimum 2 years of relevant experience in a related aviation field. You have strong program/project management skills. You have an understanding of, or experience with electrical and electromechanical products. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have knowledge of aviation certification (Type Certificate and Supplemental Type Certificates) and qualification topics. You have knowledge of aviation standards, such as RTCA/DO-160, DO-178, DO-254, MIL-STD-810, MIL-STD-461, etc. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Lead the internal technical interface between engineering and the customer, either directly and/or through the sales account manager Create, collect, consolidate, and/or summarize technical data to meet customer requirements and deliverables Drive projects to meet company and engineering time, cost and requirements targets Serve as the gatekeeper for intellectual property (IP) in accordance with company policy Support new sales efforts by reviewing proposal requirements and determining compliance Work closely with engineering project managers and teams to assess status and represent progress to sales account managers and customers Provide product-level expertise on functions, features, qualifications, and capabilities Collaborate with cross-functional teams throughout the proposal process to completion WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI5638fe8c82f6-9083
09/19/2026
Full time
Job Description Job Description You must be a U.S. citizen to apply for this position COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Program Engineer, you will lead the technical interface between sales account managers and design engineers to secure programs and provide aftermarket support to customers. Programs include new product development and existing product qualification and certification efforts for aviation products such as cockpit avionics, power conversion equipment, and battery systems. To be successful in this role, you will need to effectively collaborate with cross-functional teams and external customers. THIS POSITION MAY BE FOR YOU IF You are a U.S. Citizen. You have a Bachelor of Science in Electrical, Mechanical or related engineering field. You have a minimum 2 years of relevant experience in a related aviation field. You have strong program/project management skills. You have an understanding of, or experience with electrical and electromechanical products. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have knowledge of aviation certification (Type Certificate and Supplemental Type Certificates) and qualification topics. You have knowledge of aviation standards, such as RTCA/DO-160, DO-178, DO-254, MIL-STD-810, MIL-STD-461, etc. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Lead the internal technical interface between engineering and the customer, either directly and/or through the sales account manager Create, collect, consolidate, and/or summarize technical data to meet customer requirements and deliverables Drive projects to meet company and engineering time, cost and requirements targets Serve as the gatekeeper for intellectual property (IP) in accordance with company policy Support new sales efforts by reviewing proposal requirements and determining compliance Work closely with engineering project managers and teams to assess status and represent progress to sales account managers and customers Provide product-level expertise on functions, features, qualifications, and capabilities Collaborate with cross-functional teams throughout the proposal process to completion WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI5638fe8c82f6-9083