14 jobs found

Job Description Job Description Forefront Solutions is growing and seeking an experienced Low-Voltage System Installer (Level III) to play a crucial role in complex commercial projects. This is a field position where you'll run day-to-day work on mid-size jobs, handle advanced troubleshooting, perform basic/intermediate system programming, and mentor junior technicians. It's also a key step toward Lead Technician and Senior Lead roles. What You'll Do - Install and integrate low-voltage systems: structured cabling (data/voice/video), racks/cabinets, patch panels, and cabling for CCTV, access control, intrusion, and fire alarm interfaces. - Troubleshoot complex copper and fiber issues (faults, cross-talk, interference, performance problems) using certifiers, OTDR, and other test equipment. - Support commissioning and close-out with testing, documentation, and punch-list resolution. - Perform basic to intermediate programming for access control, CCTV/NVR systems, and fire alarm/intrusion panels within company guidelines. - Help with small-scale design and layout (mark up floor plans/risers, suggest routes and device placement, assist with rough BOMs). - Lead Level I/II techs on site, manage daily start-up/wrap-up, and coordinate with GCs, site contacts, and other trades. - Model safe work practices and reinforce BICSI/TIA/EIA/NEC low-voltage standards. What We're Looking For - 2-5+ years of low-voltage installation experience (structured cabling plus at least one of: access control, CCTV, intrusion, or fire alarm integration). - Expert skills installing copper (Cat5e/Cat6), coax, and fiber; racks/cabinets; patch panels; and cable management. - Proven advanced troubleshooting ability for cabling and connectivity issues. - Experience with basic/intermediate programming on common low-voltage/security platforms. - Familiarity with BICSI best practices, TIA/EIA standards, and local/national low-voltage codes. - Able to lead small crews, communicate clearly with customers and teammates, and keep work organized and on schedule. - Comfortable with frequent standing, bending, ladder/lift work, lifting 40-50 lbs, and working on active construction sites; willing to work overtime/nights/weekends as needed. - Willing and able to travel occasionally to customer sites outside the immediate Clarksville area based on project and client needs. - Valid driver's license and reliable transportation to our company's office. - BICSI Installer I/II and manufacturer certifications (S2, Fire-Lite, Potter, Paxton, Milestone, etc.) are a plus. Growth Path This Level III role serves as a bridge to leadership. High performers can progress to: Lead Technician (Level 4) - running full crews, job planning, and on site coordination Senior Lead Technician (Level 5) - overseeing multiple projects/crews and helping set field standards Ready to Level Up? If you're a senior installer who wants more responsibility and a clear path to Lead Technician, we'd like to talk. Location: Clarksville, TN (Field-Based) Pay: $23.00-$29.50 per hour (DOE) Company Description Who we are. Forefront offers customized IT outsourcing and support, hardware and software procurement, cloud services, cabling infrastructure, and security. No matter the need, big or small, it's our goal to be able to meet your needs. We are here to support the function of your business technology and security needs. Company Description Who we are. Forefront offers customized IT outsourcing and support, hardware and software procurement, cloud services, cabling infrastructure, and security. No matter the need, big or small, it's our goal to be able to meet your needs. We are here to support the function of your business technology and security needs.

Job Description Job Description Tier III NOC Technician Washington, DC - metro accessible, 4 days onsite, 1 day remote Perm position, full benefits package, $120K, perhaps some flex depending on experience and certs MUST HAVE ONE OR MORE HIGH LEVEL CERTIFICAITON: CCNP, CCNP Security, JNCIP, or equivalent RESPONSIBILITIES Serve as the final escalation point for complex Tier 1 and Tier 2 incidents requiring advanced technical expertise Lead troubleshooting and resolution of critical network outages, performance degradation, and complex technical issues Perform root cause analysis on major incidents and develop preventive measures to avoid recurrence Provide technical leadership and guidance to junior NOC technicians during critical incidents Design and implement solutions for network optimization, automation, and performance improvements Conduct in-depth packet analysis and protocol troubleshooting to diagnose complex connectivity issues Configure and troubleshoot advanced network devices including core routers, multilayer switches, firewalls, and load balancers Participate in and lead Major Incident Management calls with stakeholders and executive leadership Develop, maintain, and improve NOC procedures, runbooks, and technical documentation Perform advanced network and system performance analysis using multiple monitoring and diagnostic tools Collaborate with Network Engineering, Security, and Systems Administration teams on complex cross-functional issues Evaluate and recommend improvements to network architecture, monitoring capabilities, and operational processes Mentor and train Tier 1 and Tier 2 technicians on troubleshooting techniques and best practices Participate in change advisory board (CAB) reviews and provide technical assessments of proposed changes Execute complex network changes during maintenance windows with minimal service disruption Monitor and optimize network capacity, bandwidth utilization, and traffic patterns Coordinate with vendors and external service providers to resolve carrier and equipment issues Develop and maintain disaster recovery procedures and participate in failover testing Implement network security measures and respond to security incidents in coordination with security teams Create and present technical reports on network performance, incidents, and trends to management Participate in on-call rotation as the senior technical escalation resource Stay current with emerging technologies and industry best practices to continuously improve operations REQUIREMENTS Bachelor's degree OR equivalent experience 7+ years of experience in network operations, network engineering, or systems administration 5+ years of experience working in a 7x24x365 NOC or similar mission-critical environment Demonstrated experience as a senior escalation point for complex technical issues Supporting large-scale enterprise networks with thousands of users Expert-level knowledge of network protocols, routing, and switching (BGP, OSPF, EIGRP, MPLS, spanning-tree, VLAN) Advanced troubleshooting skills using packet analysis tools (Wireshark, tcpdump) Deep understanding of network security technologies including firewalls, IDS/IPS, VPN, and NAT Extensive experience with enterprise network equipment from multiple vendors (Cisco, Juniper, Palo Alto, Arista, F5) Proficiency with network monitoring and management platforms (SolarWinds, Nagios, Splunk, NetFlow/sFlow analysis) Knowledge of TCP/IP stack, network services (DNS, DHCP, NTP), and application protocols Expertise in load balancing, traffic engineering, and high-availability architectures Strong understanding of data center networking, fabric technologies, and virtualization Routing policy implementation and traffic optimization techniques Advanced troubleshooting skills across multiple technology domains (network, systems, applications, security) Ability to interpret network diagrams, technical specifications, and vendor documentation Strong analytical and critical thinking skills for solving complex problems under pressure Leadership and mentoring skills for guiding junior team members Excellent written and verbal communication skills across stakeholder levels Proven incident management ability, including leading bridge calls and coordinating resources during major incidents Proficiency with scripting and automation tools (Python, Ansible, PowerShell, Bash) Deep understanding of ITIL framework (Incident, Problem, Change Management) Knowledge of cloud networking architectures (AWS, Azure, GCP) and DevOps practices Ability to work effectively under extreme pressure and make rapid technical decisions Flexibility to work rotating shifts including nights, weekends, and holidays Strong documentation skills and commitment to accurate technical records Company Description System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions. Company Description System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions.

Amazon is looking for a detail-oriented individual to join our Data Center Engineering Operations Team. This committed group works to maintain the critical physical infrastructure that supports Amazon Web Services. Specifically, this team works to ensure that the data center's MEP operates at 100% availability while maintaining first-class customer service to the teams and groups within the data centers. The Data Center Chief Engineer (CE) is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The CE serves as an expert technical resource reporting to a site's Data Center Facility Manager and interacting with onsite Engineering Operations Technicians (EOT) and any third party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support Amazon within its owned and operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Also expected from the CE is the ability to manage small-to-medium impacting projects from conception to completion. These projects involve large amounts of independent work as well as collaboration with external support groups including engineering, automation, processing, and finance in both local and global settings. The CE will be tasked with creating and delivering on key milestones, obtaining and tracking quotes for all necessary costs, and documenting project results for future implementation at other facilities. The goals of such projects are for the CE to drive innovation and resiliency while reducing operational costs in the facilities. The CE directs, trains and supports EOT's in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations. Implementation and execution of site/equipment-specific training exercises is also expected. This equipment includes, but is not limited to, stand-by diesel generators, switchgear, UPS's, PDU's, AHU's, chillers, cooling towers, chemical treatment systems, pumps, motors, VFD's, and building automation systems. This technical leadership position brings a 24/7 presence to support the engineering operations technicians on site and to be available to respond to site specific needs This position requires that the candidate selected be a US citizen and currently possess and maintain an active Top Secret security clearance with SCI eligibility. Key job responsibilities • Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. • Operate independently with limited direct management • Act as an escalation point for all facilities-related issues within the data center, escalating to the Data Center Facility Manager as needed, and work OT hours as needed to support site stability. • Perform root cause analysis of equipment failures • Troubleshoot and report of facility and data sever-level events within internal SLA • Create and deploy new standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams • Provide training and guidance to Engineering Operations Technicians • Ensure all safety procedures are adhered to by vendor and Amazon staff • Utilize internal CMMS to manage building workflows • Communicate complex technical information to a non-technical audience Physical Requirements: • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Coordinate body movements when using tools or equipment • Reach and stretch to position equipment and fixtures while maintaining balance • Bend or twist the body into unusual positions while working • Perform physical tasks all day without becoming overly tired • Use hands to manipulate small wires and objects • Push or pull heavy objects into position • Work in a noisy environment • Work at depths, such as under raised floors About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 3+ years of vendor management experience - 4+ years of relevant work in a data center or other critical environment experience - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience with Microsoft Office including Outlook, Word, and Excel - Current, active TS/SCI US Government Security Clearance PREFERRED QUALIFICATIONS - 3+ years of construction or project management experience - Electrical or mechanical Journeyman License - operating engineering license such as DC II, DC III, or equivalent - Experience in construction or project management Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, OH, Plain City - 96 300.00 USD annually

Job Description Job Description 11-009 - Security Control Assessor (SCA) II Location: Crystal City, VA Salary: $168,932.71 Billet Number: JUSTIFIED-0055 Skill Level: 2 Current Vacancy-Specific Requirements MANDATORY: 7-9 years related experience; 4+ years experience in SAP, SCI, or Collateral Information Systems (S) security and implementation of regulations identified in the description of duties; Prior performance in the role of ISSO and ISSM or SCA; TRAINING: IAM Level II (in lieu of IAT Level III) Position Description The SCA is responsible for conducting a comprehensive assessment of the management, operational, and technical security controls employed within or inherited by an IS to determine the overall effectiveness of the controls (i.e., the extent to which the controls are implemented correctly, operating as intended, and producing the desired outcome with respect to meeting the security requirements for the system). SCAs also provide an assessment of the severity of weaknesses or deficiencies discovered in the IS and its environment of operation and recommend corrective actions to address identified vulnerabilities. Responsibilities will cover Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities within the customer's area of responsibility. Performance shall include: Perform oversight of the development, implementation and evaluation of IS security program policy; special emphasis placed upon integration of existing SAP network infrastructure Perform assessment of ISs, based upon the Risk Management Framework (RMF) methodology in accordance with the Joint Special Access Program (SAP) Implementation Guide (JSIG) Advise the Information System Owner (ISO), Information Data Owner (IDO), Program Security Officer (PSO), and the Delegated and/or Authorizing Official (DAO/AO) on any assessment and authorization issues Evaluate Authorization packages and make recommendation to the AO and/or DAO for authorization Evaluate IS threats and vulnerabilities to determine whether additional safeguards are required Advise the Government concerning the impact levels for Confidentiality, Integrity, and Availability for the information on a system Ensure security assessments are completed and results documented and prepare the Security Assessment Report (SAR) for the Authorization boundary Initiate a Plan of Action and Milestones (POA&M) with identified weaknesses for each Authorization Boundaries assessed, based on findings and recommendations from the SAR Evaluate security assessment documentation and provide written recommendations for security authorization to the Government Discuss recommendation for authorization and submit the security authorization package to the AO/DAO Assess proposed changes to Authorization boundaries operating environment and mission needs to determine the continuation to operate. Review and concur with all sanitization and clearing procedures in accordance with Government guidance and/or policy Assist the Government compliance inspections Assist the Government with security incidents that relate to cybersecurity and ensure that the proper and corrective measures have been taken Ensure organization are addressing and conducting all phases of the system development life cycle (SDLC) Evaluate Hardware and Software to determine security impact that it might have on Authorization boundaries Evaluate the effectiveness and implementation of Continuous Monitoring Plans Represent the customer on inspection teams Experience: 7 - 9 years related experience Minimum of four (4) years' experience in SAP, SCI or Collateral Information Systems (IS) Security and the implementation of regulations identified in the description of duties. Prior performance in the role of ISSO and ISSM or SCA Education: Bachelor's degree in a related discipline or equivalent experience (4 years) Certifications: Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level III or Information Assurance Manager Level II within 6 months of the date of hire Security Clearance: Current clearance as defined in the Task Order Eligibility for access to Special Access Program Information Willingness to submit to a Counterintelligence polygraph Other Requirements: Must be able to regularly lift 50lbs Top Secret/Special Compartmented Information (TS/SCI) Individuals must possess current Top Secret/Special Compartmented Information (TS/SCI) eligibility with an in scope BI, or enrollment into Continuous Evaluation, or an in scope open PR. Depending on the position, additional security screening may also be required (e.g., polygraph examination, etc.).

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. C. Respirators, half mask cartridge respirators plus goggles, or full face cartridge respirators may be required in designated areas or under prescribed work conditions. VIII. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description Date Posted: 6-12-2026 Date Removed: 6-19-2026 Position: Continuous Tech Lead Department: Continuous Pay Grade: NE10 Shift: D-Shift (7:30PM-7:45AM 4on / 4off) Reminder: If you apply for a position and it is offered to you, and you decline the position, you will have to wait 6 months after posting for another position. Posting for a position after the deadline will disqualify you. (If posting is not able to be removed as soon as the 5pm deadline.) LATERAL MOVES ARE NOW ALLOWED WITH THE REVISED JOB BID SYSTEM. This requisition will be posted on the NGK recruiting board for 7 days. Members should also consider the following requirements after applying for a position. You must be on your current job for one (1) year if your job grade is 7 or lower. You must be in your current job for a minimum of two (2) years for job grades 8 or higher due to the more technical nature of the jobs. No disciplinary actions within the last year (low level points warnings may be waived if there are special circumstances that can be, or are, documented). Meet the minimum requirements of the open job description. Completion of the current learner's assessment and other training requirements. Completed Career Readiness Certificate (CRC). Members should be mindful of the shift, area, and job duties after applying for a job so as not to risk a six-month waiting period to apply for a future opportunity. The members should carefully consider all these factors to avoid rejecting a job offer. I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job . click apply for full job details

Job Description Job Description JOB TITLE: Technical Leader I JOB GRADE: NE10 FLSA STATUS: Nonexempt DEPARTMENT NAME: NGKACU DEPARTMENT NUMBER: NGKACU REPORTS TO: Supervisor I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Supervisor or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Company: US0429 Sysco Acadiana (Division of USA II) Sales Territory: None Zip Code: 70518 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Syscos actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors Pay: $27 per hour, based on experience 1st Shift available Annual Boot Allowance Outstanding benefits: (link removed) Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, refrigeration system operator and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (high and low voltage) Knowledge of OSHA general industry electrical safety standards; Title 29 Knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements Proficient in electrical meter testing Knowledge of OSHA electrical Arc Flash requirements Understanding and working knowledge of PLC's and PLC trouble shooting Conduit bending Motors and Motor control center knowledge Motor start knowledge Contactor and relay knowledge and repair Complete welding projects as needed Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, completing basic maintenance and repair needs to ensure timely completion of all maintenance needs, Perform general building maintenance which includes but not limited to carpentry, painting, plumbing, changing of light bulbs, repair of electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which includes but not limited to roof inspections and repairs, concrete and asphalt paving inspections and repairs, concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling, product racking inspections and repairs, automatic Storage and Retrieval System (ASRS) inspections and repairs, dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs Participate in departmental on-call program, as designated Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor Facility Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Six years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I / RETA: CARO Refrigeration Operator II / RETA: CIRO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) RETA CARO required RETA CIRO in addition to RETA CARO (preferred) Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. BENEFITS INFORMATION: For information on Syscos Benefits, please visit (link removed) OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. Were looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Job Description Job Description Come make your mark with Watermark! FOUNDED BY USAF VETERANS in 2007, we are proud to be a Service-Disabled Veteran Owned Small Business. SUBJECT MATTER EXPERTS specializing in security and risk management. We're intimately familiar with DOD security programs and mission requirements. OUR CORE VALUES drive every action we take as a company. We strive to exhibit PERSPECTIVE, PASSION, COMMUNICATION, INTEGRITY AND ETHICS, and BALANCE in all we do. COMPETITIVE BENEFITS PACKAGE to address our employees' physical, mental, emotional, and financial well-being. This includes 100% employer- paid medical insurance, ample paid leave, a free employee assistance program, and a competitive 401k savings plan. At Watermark, our people come first! Security Control Assessor (SCA) II The SCA is responsible for conducting a comprehensive assessment of the management, operational, and technical security controls employed within or inherited by an IS to determine the overall effectiveness of the controls (i.e., the extent to which the controls are implemented correctly, operating as intended, and producing the desired outcome with respect to meeting the security requirements for the system). SCAs also provide an assessment of the severity of weaknesses or deficiencies discovered in the IS and its environment of operation and recommend corrective actions to address identified vulnerabilities. Responsibilities will cover Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities within the customer's area of responsibility. In this role you will . Perform oversight of the development, implementation and evaluation of IS security program policy; special emphasis placed upon integration of existing SAP network infrastructure Perform assessment of ISs, based upon the Risk Management Framework (RMF) methodology in accordance with the Joint Special Access Program (SAP) Implementation Guide (JSIG) Advise the Information System Owner (ISO), Information Data Owner (IDO), Program Security Officer (PSO), and the Delegated and/or Authorizing Official (DAO/AO) on any assessment and authorization issues Evaluate Authorization packages and make recommendation to the AO and/or DAO for authorization Evaluate IS threats and vulnerabilities to determine whether additional safeguards are required Advise the Government concerning the impact levels for Confidentiality, Integrity, and Availability for the information on a system Ensure security assessments are completed and results documented and prepare the Security Assessment Report (SAR) for the Authorization boundary Initiate a Plan of Action and Milestones (POA&M) with identified weaknesses for each Authorization Boundaries assessed, based on findings and recommendations from the SAR Evaluate security assessment documentation and provide written recommendations for security authorization to the Government Discuss recommendation for authorization and submit the security authorization package to the AO/DAO Assess proposed changes to Authorization boundaries operating environment and mission needs to determine the continuation to operate. Review and concur with all sanitization and clearing procedures in accordance with Government guidance and/or policy Assist the Government compliance inspections Assist the Government with security incidents that relate to cybersecurity and ensure that the proper and corrective measures have been taken Ensure organization are addressing and conducting all phases of the system development life cycle (SDLC) Evaluate Hardware and Software to determine security impact that it might have on Authorization boundaries Evaluate the effectiveness and implementation of Continuous Monitoring Plans Represent the customer on inspection teams Additional duties as assigned Experience Requirements: 7-9 years related experience Minimum of four (4) years' experience in SAP, SCI or Collateral Information Systems (IS) Security and the implementation of regulations identified in the description of duties. Prior performance in the role of ISSO and ISSM or SCA Education Requirements: Bachelor's degree in a related area OR Associate's degree in a related area + 2 years' experience OR equivalent experience (4 years) Certification Requirements: Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level III or Information Assurance Manager Level II within 6 months of the date of hire Security Clearance Requirements: Active TS/SCI clearance Eligibility for access to Special Access Program Information Willingness to submit to a Counterintelligence polygraph Other Requirements: Must be able to regularly lift up to 50 lbs. May require sedentary work at least 50% of the time Reports to a physical location which occasionally requires the ability to traverse between buildings Ability to manage stress with a high degree of maturity/professionalism Demonstrated critical thinking and leadership skills and the ability to work well with others Effective verbal and written communication skills All Level I & Level II positions - candidate should possess some Special Access Program (SAP) experience All Level III positions -candidate should possess 2+ years of Special Access Program (SAP) experience Watermark provides salary ranges with job postings in states where it is legally required; any other salary ranges associated with our postings are third party estimates and may not be an accurate reflection of Watermark's total compensation package. Multiple considerations are taken into account when determining the final salary/hourly rate, including but not limited to, Contract Wage Determination, education and certifications, relevant work experience, related skills and competencies, as well as Federal Government Contract Labor Categories. Central to Watermark's employment philosophy is the wellbeing of our employees which is why we offer a robust benefits package and wellness program alongside of annual base compensation. Watermark is an equal opportunity employer. All terms and conditions of employment are established without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, veteran status, or any other protected category under applicable federal, state, and local laws. Powered by JazzHR Ulb7SEozj9

Job Description Job Description Description: P-11 Security is seeking a SCA who is responsible for conducting a comprehensive assessment of the management, operational, and technical security controls employed within or inherited by an IS to determine the overall effectiveness of the controls (i.e., the extent to which the controls are implemented correctly, operating as intended, and producing the desired outcome with respect to meeting the security requirements for the system). SCAs also provide an assessment of the severity of weaknesses or deficiencies discovered in the IS and its environment of operation and recommend corrective actions to address identified vulnerabilities. Responsibilities will cover Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities within the customer's area of responsibility. Performance shall include: Perform oversight of the development, implementation and evaluation of IS security program policy; special emphasis placed upon integration of existing SAP network infrastructure Perform assessment of ISs, based upon the Risk Management Framework (RMF) methodology in accordance with the Joint Special Access Program (SAP) Implementation Guide (JSIG) Advise the Information System Owner (ISO), Information Data Owner (IDO), Program Security Officer (PSO), and the Delegated and/or Authorizing Official (DAO/AO) on any assessment and authorization issues Evaluate Authorization packages and make recommendation to the AO and/or DAO for authorization Evaluate IS threats and vulnerabilities to determine whether additional safeguards are required Advise the Government concerning the impact levels for Confidentiality, Integrity, and Availability for the information on a system Ensure security assessments are completed and results documented and prepare the Security Assessment Report (SAR) for the Authorization boundary Initiate a Plan of Action and Milestones (POA&M) with identified weaknesses for each Authorization Boundaries assessed, based on findings and recommendations from the SAR Evaluate security assessment documentation and provide written recommendations for security authorization to the Government Discuss recommendation for authorization and submit the security authorization package to the AO/DAO Assess proposed changes to Authorization boundaries operating environment and mission needs to determine the continuation to operate. Review and concur with all sanitization and clearing procedures in accordance with Government guidance and/or policy Assist the Government compliance inspections Assist the Government with security incidents that relate to cybersecurity and ensure that the proper and corrective measures have been taken Ensure organization are addressing and conducting all phases of the system development life cycle (SDLC) Evaluate Hardware and Software to determine security impact that it might have on Authorization boundaries Evaluate the effectiveness and implementation of Continuous Monitoring Plans Represent the customer on inspection teams Requirements: Experience: 7 - 9 years related experience Minimum of four (4) years' experience in SAP, SCI or Collateral Information Systems (IS) Security and the implementation of regulations identified in the description of duties. Prior performance in the role of ISSO and ISSM or SCA Education : Bachelor's degree in a related discipline or equivalent experience (4 years) Certifications: Must meet position and certification requirements outlined in DoD Directive 8570.01-M for Information Assurance Technician Level III or Information Assurance Manager Level II within 6 months of the date of hire Security Clearance: Current Top Secret Clearance with SCI Eligibility Eligibility for access to Special Access Program Information Willingness to submit to a Counterintelligence polygraph Other Requirements: Must be able to regularly lift 50lbs

Job Description Job Description Position: Audio Technician Level 3 Summary : The Audio Technician Level 3 is a senior-level role responsible for assisting in planning, execution, and oversight of all audio-related aspects of live events, broadcasts, or studio productions. This individual is expected to manage complex audio systems, coordinate teams, and ensure flawless sound quality across a variety of settings. The role includes high-level troubleshooting, system design input, and mentorship of junior technicians. ESSENTIAL FUNCTIONS: Major Responsibilities: Prep Audio: Design and configure complex audio systems including mixing consoles, stage boxes, DSPs, wireless systems, and digital audio networks. Collaborate with Director of Audio and touring crew to execute detailed audio plans. Supervise and mentor Level 1 and Level 2 audio technicians; providing training and technical guidance. Set up, operate, and strike audio equipment including digital/analog mixing consoles, microphones, wireless systems, monitors, intercoms, and playback devices. Perform and lead sound checks, monitor levels, and adjust audio throughout events or productions. Troubleshoot and resolve advanced audio issues in real time. Interpret and execute audio plots, input/output lists, and signal routing diagrams. Maintain and update audio equipment inventory, including performing basic repairs or preventive maintenance. Mentor and supervise Level 1 technicians and assist with onboarding or training. Ensure compliance with safety protocols and technical standards. Quality Control and Testing: Perform routine maintenance, cleaning, and storage of audio equipment. Troubleshoot advanced issues and escalate issues as needed to Audio Director. Test audio equipment for functionality and performance. Teamwork & Communication: Communicate with the Director of Audio and coworkers throughout the project and ensure customer satisfaction. Ability to work in teams and assist others in delegation / task completion. Organization: Documentation of equipment configurations. Archival of client show files and system configurations. Help maintain warehouse organization and cleanliness. Maintain equipment software and firmware versions. Safety: Ensure workplace safety and efficiency. Follow proper safety protocol at all times. Wear proper PPE at all times, based on the scope of work. Attendance: Attendance is an essential requirement for this position. Any Other Duties as Assigned by Supervisor: To be determined by supervisor on a permanent or project basis. PREFERRED QUALIFICATIONS: Education/Certificates: Associates or Bachelor's degree, technical certification, or equivalent experience in audio engineering, AV technology, or related field. Familiarity/Certification with Dante or other audio networking protocols (Milan/Ravenna). Experience: 4-6+ years of experience in live sound, studio recording, theater production, or AV support. Highly proficient in operating digital and analog audio consoles (e.g., Avid, DiGiCo, Allen & Heath, Yamaha). Expert level knowledge of audio system tuning, signal flow, gain staging, EQ, and dynamics. Experience with wireless microphone systems, monitor mixes, and live sound reinforcement. Strong leadership and problem solving abilities. Skills / Abilities: Ability to work under a variety of indoor and outdoor conditions. Ability to operate a forklift preferred. Troubleshooting and diagnostic skills. Ability to work within a team, lead when necessary, and remain professional under pressure / high stress situations. GROWTH OPPORTUNITIES: Level 3 Audio Technicians may advance to specialized roles based on experience, leadership, and continued professional development.

Job Description Job Description Forefront Solutions is growing and seeking an experienced Low-Voltage System Installer (Level III) to play a crucial role in complex commercial projects. This is a field position where you'll run day-to-day work on mid-size jobs, handle advanced troubleshooting, perform basic/intermediate system programming, and mentor junior technicians. It's also a key step toward Lead Technician and Senior Lead roles. What You'll Do - Install and integrate low-voltage systems: structured cabling (data/voice/video), racks/cabinets, patch panels, and cabling for CCTV, access control, intrusion, and fire alarm interfaces. - Troubleshoot complex copper and fiber issues (faults, cross-talk, interference, performance problems) using certifiers, OTDR, and other test equipment. - Support commissioning and close-out with testing, documentation, and punch-list resolution. - Perform basic to intermediate programming for access control, CCTV/NVR systems, and fire alarm/intrusion panels within company guidelines. - Help with small-scale design and layout (mark up floor plans/risers, suggest routes and device placement, assist with rough BOMs). - Lead Level I/II techs on site, manage daily start-up/wrap-up, and coordinate with GCs, site contacts, and other trades. - Model safe work practices and reinforce BICSI/TIA/EIA/NEC low-voltage standards. What We're Looking For - 2-5+ years of low-voltage installation experience (structured cabling plus at least one of: access control, CCTV, intrusion, or fire alarm integration). - Expert skills installing copper (Cat5e/Cat6), coax, and fiber; racks/cabinets; patch panels; and cable management. - Proven advanced troubleshooting ability for cabling and connectivity issues. - Experience with basic/intermediate programming on common low-voltage/security platforms. - Familiarity with BICSI best practices, TIA/EIA standards, and local/national low-voltage codes. - Able to lead small crews, communicate clearly with customers and teammates, and keep work organized and on schedule. - Comfortable with frequent standing, bending, ladder/lift work, lifting 40-50 lbs, and working on active construction sites; willing to work overtime/nights/weekends as needed. - Willing and able to travel occasionally to customer sites outside the immediate Clarksville area based on project and client needs. - Valid driver's license and reliable transportation to our company's office. - BICSI Installer I/II and manufacturer certifications (S2, Fire-Lite, Potter, Paxton, Milestone, etc.) are a plus. Growth Path This Level III role serves as a bridge to leadership. High performers can progress to: Lead Technician (Level 4) - running full crews, job planning, and on site coordination Senior Lead Technician (Level 5) - overseeing multiple projects/crews and helping set field standards Ready to Level Up? If you're a senior installer who wants more responsibility and a clear path to Lead Technician, we'd like to talk. Location: Clarksville, TN (Field-Based) Pay: $23.00-$29.50 per hour (DOE) Company Description Who we are. Forefront offers customized IT outsourcing and support, hardware and software procurement, cloud services, cabling infrastructure, and security. No matter the need, big or small, it's our goal to be able to meet your needs. We are here to support the function of your business technology and security needs. Company Description Who we are. Forefront offers customized IT outsourcing and support, hardware and software procurement, cloud services, cabling infrastructure, and security. No matter the need, big or small, it's our goal to be able to meet your needs. We are here to support the function of your business technology and security needs.