22 jobs found

Job Description Job Description The CMM Programmer position is located in Dixon, IL and is responsible for developing, maintaining, and executing Coordinate Measuring Machine (CMM) programs to inspect manufactured components and ensure compliance with engineering drawings, customer specifications, and quality requirements. This is a 1st shift position , Monday through Friday, from 6:00 a.m. to 2:00 p.m. Role Responsibilities : Develop, write, modify, and maintain CMM programs for dimensional inspection of manufactured components. Set up and operate Coordinate Measuring Machines and related inspection equipment. Interpret complex engineering drawings, blueprints, specifications, and 3D CAD models. Apply Geometric Dimensioning and Tolerancing (GD&T) principles when developing inspection programs and evaluating components. Perform first-piece, in-process, final, and other dimensional inspections as required. Analyze CMM inspection results and clearly communicate dimensional or quality concerns to appropriate personnel. Generate, review, and maintain accurate inspection reports and measurement records. Troubleshoot CMM programming, setup, probing, and measurement issues. Determine appropriate inspection methods, probe configurations, alignments, and measurement strategies. Support First Article Inspection (FAI), PPAP, capability studies, and other customer or quality documentation as required. Work with Engineering and Manufacturing personnel to investigate dimensional nonconformances and support root-cause analysis and corrective actions. Assist Production with troubleshooting manufacturing processes when dimensional concerns are identified. Maintain CMM programs and inspection documentation in accordance with document-control requirements. Ensure measuring equipment is properly maintained and calibrated in accordance with established procedures. Support continuous improvement activities designed to improve product quality, inspection efficiency, and manufacturing processes. Follow all company safety, quality, and environmental policies and procedures. Perform other related duties as assigned. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications : Education consisting of a high school diploma/GED Previous experience programming and operating CMM equipment in a manufacturing environment. Proficiency with applicable CMM programming software. Experience with PC-DMIS, Strong knowledge of GD&T and dimensional inspection principles. Ability to read and interpret complex engineering drawings, specifications, and CAD models. Knowledge of precision measurement equipment, including micrometers, calipers, height gauges, indicators, and other inspection tools. Understanding of manufacturing processes and their relationship to dimensional quality. Knowledge of AS9100 or related Aerospace working environment (preferred) Experience in complex parts and production operations Hourly Rate : $35.00 Actual salaries may vary based on several factors, including but not limited to applicable work experience, training, education, and performance. This position is eligible for an annual incentive plan based on performance and company growth. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid paternal leave), and more. Immigration Sponsorship Not Available: Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.) Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. International relocation or remote work arrangements outside of the United States will not be considered. Equal Opportunity Employer, including Disability and Veterans Company Description Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Company Description Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world.

Cam Programmer Location: Norfolk, VA Shift: Monday to Friday, 7:30 am-4:30pm Type Direct Hire About the Company: Our client is a family owned company that manufactures valves for military and industrial applications. The CAM Programmer will be joining a company where their employees are their most treasured assets. Job Responsibilities: The CAM Programmer will be well-versed in computer aided design and computer-aided manufacturing (Mastercam). The person in this position will be required to interface with both engineering and manufacturing daily. Duties: - Create new CAM programs utilizing Mastercam (toolpath programming for both milling and turning) - Design hard CNC work-holding fixtures (i.e. aluminum, steel) to be utilized for CNC milling operations - Design and create soft work-holding fixtures for secondary manufacturing processes and CMM measuring - Use design software to produce 2D and/or 3D designs - Incorporate manufacturing feedback into 3D model designs - Revise 2D Drawings as requested Benefits: - 401(k) - Profit sharing plan - Medical dental, vision, disability, life, insurance - Paid holidays, vacation and sick leave are provided Disclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at - Minimum 5 years of experience in CAD/CAM in a manufacturing environment - Mastercam experience with Mill 3D and turning - Ability to analyze G-Code - Experience using Inventor and SolidWorks software

Industry leading manufacturing company is seeking CMM Programmer to join their growing team! In this role, you will be responsible for writing CMM programs. - Must have CMM Programming experience - Must have Automotive Manufacturing experience. - Must have experience with PC DMIS software - Must have CAD experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Job Description Job Description POSITION SUMMARY The CMM Programmer performs first piece, in-process, and final inspections on complex components with tight tolerances, using both manual and automatic CMMs. This role requires strong CMM programming skills and a solid working knowledge of geometric dimensioning & tolerancing (GD&T) to ensure product conforms to blueprint tolerances and specifications. Accurate documentation of inspection results, and clear communication of findings to the team, are essential to this role. KEY RESPONSIBILITIES • Write CMM programs • Operate both manual and automatic CMMs • Perform first piece inspections and provide feedback on findings and opportunities for improvement to the foreman • Document all inspection results • Identify, document, and report nonconforming product • Calibrate gages • Perform other inspection-related tasks as needed WHAT WE'RE LOOKING FOR Required: • High school diploma or equivalent • Ability to read complex blueprints and perform inspection layouts, including GD&T • Strong computer literacy and proficiency Preferred: • Experience with CMM software such as PC-DMIS or Calypso • ASQ certification (CQT, CQI, or similar) a plus • Background in aerospace, defense, or precision machining • Experience calibrating precision measurement equipment WHY JOIN AMMI? We offer a comprehensive benefits package designed to support you and your family: • Medical Insurance- Choice of 3 PPO plans or HDHP/HSA plan through Blue Cross Blue Shield • Dental Insurance- Delta Dental PPO (Low and High Plan options) • Vision Insurance- EyeMed Access Plan • Company-Paid Life Insurance & AD&D through UNUM • Company-Paid Short-Term & Long-Term Disability • 401(k) with Employer Contribution • Profit-Sharing • Flexible Spending Account (FSA) • Teladoc Virtual Healthcare - $10/visit • Virta Health Weight Wellness Program (no cost to enroll) • Educational Financial Assistance • Uniforms Provided (Company-Paid) • Shoe Allowance • Paid Holidays: New Year's Day, Good Friday, Memorial Day, Independence Day, Labor Day, Thanksgiving, Day After Thanksgiving, Christmas, and your Birthday (floating) • Paid Time Off • Bonuses Company Description Accurate Metal Machining, Inc. (AMMI) is a precision machining company headquartered in Painesville, Ohio, serving aerospace, defense, and industrial markets.We bring the stability of a global organization together with a close-knit team culture built on craftsmanship and precision. If you take pride in making sure every part meets spec down to the tightest tolerance, you'll fit in here. Company Description Accurate Metal Machining, Inc. (AMMI) is a precision machining company headquartered in Painesville, Ohio, serving aerospace, defense, and industrial markets.We bring the stability of a global organization together with a close-knit team culture built on craftsmanship and precision. If you take pride in making sure every part meets spec down to the tightest tolerance, you'll fit in here.

Job Description Job Description Duration: 6+ Months Position Summary: The Receiving Inspector is responsible for performing incoming inspection of purchased parts, components, and materials to verify compliance with engineering drawings, specifications, purchase order requirements, and applicable quality standards. This position supports Client's manufacturing and product quality operations by ensuring incoming material meets applicable requirements before being released for use. The Receiving Inspector works closely with Quality Engineering, Supplier Quality, Manufacturing, Engineering, and Supply Chain to identify and resolve incoming material and documentation issues. Key Responsibilities: Perform receiving inspection of incoming mechanical components, piece parts, assemblies, and materials in accordance with engineering drawings, specifications, inspection plans, and purchase order requirements. Perform dimensional and visual inspections using appropriate inspection equipment and measurement techniques. Review engineering drawings, GD&T requirements, specifications, certifications, and supplier documentation to determine product acceptance. Use inspection equipment such as calipers, micrometers, height gauges, optical comparators, profilometers, Smart Scope/vision measurement systems, and other precision measurement tools. Support CMM inspection activities as qualified and required. Document inspection results accurately and maintain appropriate inspection and quality records. Identify and document nonconforming material and initiate or support the appropriate quality notification/nonconformance process. Work with Quality Engineering and other functions to resolve inspection discrepancies and determine appropriate material disposition paths. Verify supplier certifications and documentation packages for compliance with purchase order and quality requirements. Perform inspection activities within established turnaround-time and production-priority requirements. Support sampling inspection plans, including AQL and approved Skip Lot processes, as applicable. Maintain traceability and proper control of inspected, accepted, rejected, and quarantined material. Support continuous improvement activities focused on inspection efficiency, quality, and reduction of receiving inspection backlog. Maintain inspection equipment, work areas, and records in accordance with applicable procedures and quality-system requirements. Support internal and external quality audits as required. Basic Qualifications: High school diploma or equivalent. 3-5 years of experience in receiving inspection, mechanical inspection, dimensional inspection, manufacturing quality, or a related inspection role. Ability to read and interpret engineering drawings, specifications, and inspection requirements. Working knowledge of precision measurement tools such as calipers, micrometers, height gauges, and optical measurement equipment. Basic understanding of GD&T. Ability to document inspection results accurately and clearly. Ability to work effectively with Quality, Engineering, Manufacturing, Supply Chain, and other cross-functional organizations. Ability to work independently, manage priorities, and maintain attention to detail in a high-volume environment. Preferred Qualifications: Experience in aerospace, defense, automotive, medical device, or another highly regulated manufacturing environment. Experience with AS9100 or ISO 9001 quality systems. Strong working knowledge of GD&T. Experience with CMM, Smart Scope, vision systems, optical comparators, and/or profilometers. Experience with SAP Quality Management (QM) or a similar ERP/quality system. Experience with First Article Inspection (FAI) and AS9102 requirements. Familiarity with AQL sampling and Skip Lot inspection methodologies. Experience reviewing Certificates of Conformance (CoC), material certifications, special-process certifications, and supplier quality documentation. Familiarity with nonconforming material control and MRB processes. Key Competencies: Strong attention to detail, inspection accuracy, technical drawing interpretation, sound judgment, documentation discipline, teamwork, communication, and the ability to balance quality requirements with production priorities. CMM Programmer / Operator The role of the CMM Programmer/Operator is pivotal in the production process, conducting consistent inspections on products, (parts, assemblies, raw materials, etc.) finished products and components, per drawings/specifications, to ensure products meet quality standards prior to distribution. Duties and Responsibilities: Primary: Determine part inspection requirements from internal or customer drawings. Create or edit programs for the coordinate measuring machine (CMM). Ability to validate CMM programs Utilize the programs to complete dimensional inspection using the coordinate measuring machine (CMM). Understand and utilize GD&T (geometric dimensioning and tolerancing) to complete detailed part inspection. Log and maintain inspection data as needed for evaluating and reporting. Maintain calibration system and conduct calibrations as needed. Train team members on the operation and programming of CMM (Coordinate Measuring Machines) and provide ongoing assistance to resolve any issues encountered during CMM operation. Secondary: Cross train on overlapping job functions. Conduct finished product inspections with hand gauges and measurement systems. Other duties as assigned by supervisor. High School degree. Basic Qualifications: Strong ability to develop inspection programs, using CMM Manager software or equivalent. Strong proficiency reading and interpreting engineering drawings. Strong proficiency interpreting GD&T standards. 4-8 years of CMM inspection experience. Able to lift up to 35 pounds. Ability to pass vision and color perception examination. Preferred Qualifications: Prior Aerospace industry or similar regulated industry experience. Experience with SAP. 2-3 years minimum experience with TSPACE Plus Portable Measuring Arm programming and operation. Ability and flexibility to work overtime and weekends as needed Additional Job Information: At least 3 of 7 must be CMM operators & programmers. All must use comparators, precision measurement, FAI, certification review. May work 2nd shift Company Description 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Founded in 1997, TSCTI is a Certified National Minority Business Enterprise (MBE) with a workforce of 6,000+ professionals, including 600+ Cybersecurity Subject Matter Experts (SMEs), delivering mission-critical solutions across all 50 U.S. states, Canada, and Mexico. Headquartered in Princeton, NJ, and McLean, VA, with 14 regional offices nationwide, TSCTI provides comprehensive solutions in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, IT Infrastructure, Enterprise Modernization, DevSecOps, Managed Services, Workforce Solutions, and Healthcare Staffing. We are a trusted partner to Federal, State, Local, Education (SLED), Healthcare, and Commercial organizations, delivering innovative technology and talent solutions that enable our clients to achieve their strategic objectives. As one of the nation's leading Healthcare Workforce Solutions providers, TSCTI supports federal healthcare systems, Veterans Affairs (VA) Medical Centers, state and local healthcare agencies, hospitals, clinics, laboratories, long-term care facilities, and commercial healthcare organizations. We recruit and place highly qualified healthcare professionals across a wide range of specialties, including physicians, advanced practice providers, registered nurses, allied health professionals, behavioral health specialists, laboratory personnel, pharmacy professionals, and healthcare administrative staff. Our healthcare solutions ensure continuity of care while maintaining the highest standards of clinical excellence and regulatory compliance. With a strong commitment to quality and compliance, TSCTI operates through CMMI Level 3 (Development & Services) and ISO 9001, ISO 20000, and ISO 27001 certified processes, ensuring consistent service excellence, operational maturity, and information security. Today, we proudly support 14 of the 15 Federal Executive Departments, 37 Federal agencies, 50 State governments, 115+ Local agencies, 37 School Districts, numerous healthcare organizations, and 80+ Fortune 500 and commercial clients. TSCTI has earned numerous industry recognitions, including being named among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and a 13-time Inc. 5000 honoree. The company has also been recognized by the Washington Business Journal as one of the Best Places to Work and continues to expand its capabilities through strategic innovation, acquisitions, and investments in emerging technologies. At TSCTI . click apply for full job details

About Plastic Distributors & Fabricators, LLC (PDF) PDF is an ISO 9001 certified manufacturer specializing in CNC machined, fabricated, and thermoformed plastic components, as well as precision hardware integration. We are committed to quality, safety, and continuous improvement and take pride in delivering reliable, high-quality solutions to our customers. JOB SUMMARY: The CMM Programmer / Quality Inspector is responsible for the programming, setup, and operation of CMM to inspect manufactured parts. This role ensures all components meet engineering blueprints, customer specifications, and ISO quality standards by utilizing advanced metrology equipment and traditional precision inspection tools. ESSENTIAL FUNCTIONS: • Responsible for all programming of the CMM and inspection of manufactured products. • Creates efficient and effective programs and adjusts previously written programs for the CMM equipment. • Perform dimensional and visual inspection of manufactured products using CMM and other traditional tools. • Maintain accurate records of time worked by utilizing the payroll time clock system. • Adhere strictly to ISO inspection processes, internal quality procedures, and safety guidelines. • Communicates any finding, non-conformances, or issues to Quality Manager. • Adheres to all safety procedures and guidelines. ADDITIONAL RESPONSIBILITIES: • Other duties as assigned. JOB QUALIFICATIONS: • High School Diploma or GED from an accredited institution required. • 5+ years experience desired. • Demonstrated experience in CMM Programming and operation. • Ability to read and interpret blueprints and engineering specifications. • Hands-on experience with traditional measuring equipment (e.g.: micrometers, indicators, verniers, vision system, and pi tape) and sheet metal fabrication. • Strong Analytical skills to determine the proper tools and methods required for measuring complex parts. • Demonstrated experience in mechanical inspection and calibration. • Working knowledge of blue print reading, GD&T, SPC, and sampling plans. • Ability to do FPQ's, CAV's, PPAP's and layout Inspection forms as well as determine proper tools for measuring part. • ASQ certified is a plus. PHYSICAL REQUIREMENTS & WORK ENVIRONMENT: Regularly required to talk and hear to communicate effectively with team members and management. Frequently required to stand, walk, sit, and move around the manufacturing floor. Continually required to use hands to handle, feel, and operate precision measurement tools and CMM equipment. Must be able to occasionally lift and/or move objects weighing up to 30 pounds. The ambient noise level in the work environment is typically moderate, characteristic of a manufacturing or machine shop setting. Exposure to moving mechanical parts requires strict adherence to company safety. protocols, including the use of Personal Protective Equipment (PPE) where designated. Disclaimers & Notices This job posting provides the general nature and level of work expected in this role and is not intended to be an exhaustive list of responsibilities or qualifications. Management reserves the right to modify duties based on business need at any time with or without notice. Equal Employment Opportunity Statement Plastic Distributors & Fabricators, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected status under applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. No phone calls or recruiters. Compensation details: 30-38 Hourly Wage PId829d6c152f5-9073

Job Description Job Description Now hiring CMM Programmers for a manufacturing company in Louisville. Monday - Thursday, 6am - 4:30pm. Occasional overtime on Fridays. Weekly pay ranging between $25-$28 per hour. Job Duties: Program and operate CMM equipment using DMIS to perform dimensional inspections. Perform inspections using rulers, calipers, gauges, micrometers, and other measuring equipment. Read and interpret blueprints, drawings, specifications, and quality requirements. Support PPAP activities, including inspection and quality documentation. Identify, document, and assist in resolving quality issues and nonconformances. Maintain accurate inspection records and documentation. Support continuous improvement and quality assurance initiatives. Perform other duties and tasks as assigned by the supervisor. Requirements: Must have CMM programming experience. Ability to read and understand blueprints. Experience with precision measuring instruments. Applicants must have their own transportation and submit a resume. Take the next step - apply today! Minutemen Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Company Description Founded in 1968, Minutemen Staffing is the cornerstone of The Minutemen Human Resource System, a group of HR-related companies headquartered in Cleveland, Ohio. The Minutemen Human Resource System has grown to become one of the largest private employer service organizations in the United States. OUR MISSION A family-owned business that partners with valued employers to provide qualified talent while making a difference in the community. OUR VALUES LOYALTY We are fully committed to every client and employee. ETHICS People trust us to adhere to our word and know us to be honest, open, ethical, and fair. ACCOUNTABILITY We are responsible for the success of our company, employees, and clients. DEDICATION Ensuring the highest level of satisfaction is our promise. EMPOWERMENT We encourage growth and development of each individual. RESPECT Each individual gives respect to each other, our talent, and our clients. SAFETY We promote a culture of safety that is reflected in our beliefs and attitudes. OUR VISION To expand the Minutemen family by exceeding our clients' expectations through commitment, ethics, and integrity while providing a better future for our associates, employees, and their families. Company Description Founded in 1968, Minutemen Staffing is the cornerstone of The Minutemen Human Resource System, a group of HR-related companies headquartered in Cleveland, Ohio. The Minutemen Human Resource System has grown to become one of the largest private employer service organizations in the United States. OUR MISSION A family-owned business that partners with valued employers to provide qualified talent while making a difference in the community. OUR VALUES LOYALTY We are fully committed to every client and employee. ETHICS People trust us to adhere to our word and know us to be honest, open, ethical, and fair. ACCOUNTABILITY We are responsible for the success of our company, employees, and clients. DEDICATION Ensuring the highest level of satisfaction is our promise. EMPOWERMENT We encourage growth and development of each individual. RESPECT Each individual gives respect to each other, our talent, and our clients. SAFETY We promote a culture of safety that is reflected in our beliefs and attitudes. OUR VISION To expand the Minutemen family by exceeding our clients' expectations through commitment, ethics, and integrity while providing a better future for our associates, employees, and their families.

Job Description Job Description Position Summary: As a CMM Programmer you will play a key role in ensuring that all parts meet exacting standards through advanced CMM programming and meticulous inspection practices. This role is ideal for someone with experience using Zeiss Calypso software, a strong understanding of GD&T, and a commitment to AS9100/ISO 9001 quality systems. Key Responsibilities: CMM Programming & Operation: Create, optimize, and run CMM programs using Zeiss Contura with Calypso to inspect components with precision. Quality Control Inspection: Perform dimensional inspections on parts and assemblies to verify compliance with engineering drawings and specifications. GD&T Interpretation: Read and interpret Geometric Dimensioning & Tolerancing (GD&T) from blueprints and CAD models. Data Collection & Reporting: Document inspection results, generate reports, and escalate any non-conformances or quality issues. Use of Precision Instruments: Operate calipers, micrometers, gauges, and other measurement tools for hands-on inspections. Quality Management Systems: Work within AS9100 and ISO 9001 frameworks to support audits, compliance, and continuous quality improvement. Troubleshooting: Investigate and resolve measurement discrepancies or CMM-related issues. Collaboration: Communicate effectively with engineering and production teams to support root cause analysis and corrective actions. Required Qualifications: Experience with CMM programming, preferably with Zeiss Calypso. Strong knowledge of GD&T principles and blueprint reading. Hands-on experience with precision measurement tools. Familiarity with AS9100 or ISO 9001 quality standards. Technical certificate or associate degree in Quality, Manufacturing, or a related field (preferred). Strong attention to detail and commitment to quality. Preferred Qualifications: Experience working in aerospace or defense manufacturing environments. Experience with CAD model integration and offline CMM programming. Company Description Delta Machine Company ,Harbor City, CA., is a leading manufacturing company committed to precision, innovation, and quality. We are currently seeking a skilled and detail-oriented CMM Programmer / Quality Control Inspector to join our Quality Assurance team. This is an exciting opportunity to contribute to a high-performance culture that values technical expertise, continuous improvement, and customer satisfaction. Company Description Delta Machine Company ,Harbor City, CA., is a leading manufacturing company committed to precision, innovation, and quality. We are currently seeking a skilled and detail-oriented CMM Programmer / Quality Control Inspector to join our Quality Assurance team. This is an exciting opportunity to contribute to a high-performance culture that values technical expertise, continuous improvement, and customer satisfaction.

Job Description Job Description About us: We are seeking a CMM programmer to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. Responsibilities: Perform in-process and final inspection Perform first article inspections and generates reports Conduct and report internal audits and evaluations Implement and improve quality control operating procedures Identify and troubleshoot equipment problems and defects Participate in routine visual inspections Maintain a clean and safe work environment Hexagon Bridge experience using PC-DMIS Faro Arm experience other Jobs Duties as needed to support CPI and Customers Demands Qualifications: Previous work experience in quality control or other related fields Have PC-DMIS Programming Experience MUST have 3-5 years of experience with FARO arm model QUANTOM software Verisurf 2022 Experience in Aerospace Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication skills Ability to work in a team environment Computer literate (Outlook,Word,Excel) Schedule: Monday to Friday 7:00am - 3:30pm Saturday Half day as needed OT as needed Company Description Aerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites Company Description Aerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites

Job Description Job Description Location: Poway, CA Job Type: Full-time (40 hours/week), Non-exempt (hourly), In-Person Department: Quality Reports To: Quality Manager About the Role: The purpose of this position is to support the Quality Departments ability to achieve its goals. This includes accurate and timely programming and inspection of parts as well as review of incoming material, work-in-process and customer shipments to achieve AMT quality and business objectives and comply with AS9100 standards. Other duties may be assigned as needed. Key Responsibilities: Load parts, fixtures, and probes; execute existing CMM programs. Write, develop, validate and debug measuring machine programs and provide the supporting documentation for CMM inspections. Communicate with all machinists, supervisors, and engineers to meet customer/shop floor needs. Troubleshoot and solve both machine issues and related problems in the measuring process. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to AMT, customer and AS9100 standards. Complete customer PPAP requirements including control plans and inspection reports. Perform incoming material inspection tasks according to AS 9100 procedures and counterfeit awareness per AS6174. Perform final inspection according to AS 9100 procedures. Perform process and manufacturing audits and follow-up with corrective actions. Cross train across multiple departments as needed. Perform data collection and communication tasks in ERP and other applications. Comply with all Advanced Machining and Tooling policies and procedures Other duties as assigned. Qualifications: 3+ years of CMM operating and 1+ years of CMM programming. Strong specific knowledge of blueprint reading, GD&T, setup, tooling and fixture techniques. Ability to create inspection reports, perform 1st article/in-process/final inspection reports. Knowledge of inspection tool usage such as Micrometers, Calipers etc. Good typing skills and ability to use software such as word, excel etc. Knowledge of how CAD models work. Demonstrated critical thinking abilities and root cause analysis. Strong attention to detail and accuracy. Proficient use of shop arithmetic and strong math skills. Awareness of general safety, and quality systems. High School Diploma or GED. Nice to Have: Bachelor's degree in mechanical engineering or related discipline. Rock skills. Specific applied knowledge of aerospace quality procedures and AS9100. Knowledge of non-destructive testing, metal finish processes, Metallurgy and heat treatment processes Working knowledge of CNC machining, tool, fixture, work-holding and die design. Ability to understand CMM reports. Total Rewards Package The hourly pay range for this position is $30 - $45 per hour (depending on experience). This is a permanent, non-exempt (hourly), full-time position. Medical Coverage Dental Coverage Vision Coverage 10 days paid vacation annually 5 days of paid sick leave annually 401K Plan with matching 12 Paid Holidays Additional Benefits: Flexible spending account Life insurance Parental leave Professional development assistance Employee Assistance Program Work Authorization/Security Clearance The company requires access to information, or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US citizens, or to other unauthorized individuals. This position is subject to a background check, drug test, and reference check. Must be a United States Citizen, or US Permanent Resident. AAP/EEO Statement Advanced Machining and Tooling LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Ability to commute/relocate to work location: Poway, CA 92064: Reliably commute or planning to relocate before starting work (Required) Why Join Us: AMT is a place full of hardworking people creating things. We are service orientated and work to always take good care of our customers and our people. It's also a place where people are given opportunities to learn and grow with the support of our hi Monday - Friday 7:00 AM - 3:30 PM PST 40 hours weekly with the potential for optional overtime

Senior CMM Programmer (PC-DMIS) fitchburg, MA 01420 Senior CMM Programmer (PC-DMIS) / Metrologist Fitchburg, MA $40.00 - $62.50/hour Overtime Opportunities Flexible Scheduling Full-Time or Part-Time Opportunities Micron Solutions is looking for an experienced Senior CMM Programmer to join our team in Fitchburg, MA. We're looking for someone with strong hands-on PC-DMIS programming and GD&T experience who can independently develop CMM programs, solve complex measurement challenges, and work directly with Engineering, Manufacturing, and Quality. This is a programming-focused position, not a CMM operator role. We know experienced CMM programmers are in demand, so we're willing to be flexible. Full-time and part-time candidates are encouraged to apply, and flexible scheduling options are available. Create, modify, and optimize PC-DMIS CMM programs Develop measurement strategies for complex plastic and precision-machined componentsPerform dimensional and first article inspectionsTroubleshoot complex dimensional and measurement issuesInterpret engineering drawings, specifications, and GD&T Develop inspection plans and measurement methodsPerform Gage R&R and measurement system analysisSupport SPC and process capability activitiesWork directly with Engineering, Quality, and Manufacturing to resolve dimensional issuesSupport validation and new product introduction activitiesTrain inspectors and manufacturing personnel on measurement methods and best practices Qualifications 3+ years of hands-on CMM programming experience preferred Strong proficiency programming with Hexagon PC-DMIS Ability to independently create and troubleshoot CMM programsStrong knowledge of GD&T and blueprint reading Solid understanding of dimensional metrologyExperience with precision measurement and inspection equipmentStrong troubleshooting and problem-solving skills Equivalent combinations of hands-on experience, education, and training will be considered. Experience with any of the following is helpful: Vision measurement systemsGage R&R, MSA, SPC, or process capabilityPrecision machiningPlastic injection moldingMedical device manufacturingISO 13485 or FDA-regulated environmentsMinitabIQMS/DELMIAWorksASQ certification $40.00 - $62.50/hour , based on experience Overtime opportunities may be available Flexible scheduling options Full-time or part-time opportunities Relocation may be available Medical, dental, and vision insurance for eligible employees401(k) with company matchPaid vacation and company holidaysTuition reimbursementRelocation assistance available for qualified candidatesDiverse measurement work across precision machining, injection molding, and medical manufacturing Opportunity to serve as a key PC-DMIS and metrology technical resource Work directly with Engineering, Manufacturing, and QualityHigh-impact position where your technical expertise will be valued If you're an experienced PC-DMIS CMM Programmer , we'd like to talk with you. Even if you don't meet every preferred qualification listed above, we encourage you to apply if you have strong hands-on PC-DMIS programming experience. Please note: This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without current or future sponsorship requirements. PM21 Compensation details: 40-62.5 Hourly Wage PI523bc335ab60-8194

Job Description Job Description Continental Engineering and Manufacturing (CEM) is a family-owned manufacturing company based in Chaska and Frazee, Minnesota. Since 1983, we've been at the forefront of precision machining, welding, and assembly, which has complemented our original focus on drive shaft components and assemblies. We serve a diverse clientele across North America and beyond, offering CNC horizontal and vertical milling, CNC horizontal and vertical turning (with robotic loading), broaching, hobbing, balancing, painting, welding, assembly, inspection, and stocking programs all supported by continuous investments in upgrading equipment and cutting-edge technology. At Continental, we foster a strong, positive culture that values teamwork, collaboration, respect, and the growth of every individual. With an impressive 42-year history of stability and a proud record of never having a single layoff, we provide our employees with a secure and supportive environment. We invest in our team's future by offering training programs that empower our members to enhance their skills and advance their careers. We are ISO certified and committed to delivering cost-efficient, reliable products while building lasting relationships with customers, vendors, employees, and the community. Our air-conditioned shop, generous benefits, and strong emphasis on work-life balance make us a top choice for manufacturing professionals. Job Summary The Quality Assurance Supervisor will be responsible for ensuring that products meet company and customer quality standards through rigorous inspections, accurate documentation, and effective communication. This role plays a critical part in maintaining CEM's reputation for exceptional quality and customer satisfaction. Essential Duties & Responsibilities Conduct inspections at various stages of production, including raw material, first article, in-process, and final inspections. Read and interpret part prints and machining work orders using GD&T principles. Program and operate CMM equipment (PC-DMIS required) for precision measurement and verification. Use quality inspection tools such as calipers, micrometers, bore gauges, and height gauges. Document inspection results accurately and maintain quality records in accordance with ISO 9001:2015 standards. Communicate inspection results to relevant team members and follow up on corrective actions. Assist with maintaining ISO 9001:2015 compliance, including supporting audits and maintaining certifications. Work collaboratively with production and engineering teams to ensure customer requirements are met. Perform other related duties as assigned. Qualifications High school diploma or GED required; technical training in quality assurance or machining preferred. Experience in a manufacturing quality role, preferably in an ISO 9001:2015 certified environment. Proficiency in reading part prints and using GD&T. Experience programming and operating CMM equipment (PC-DMIS). Proficiency in Microsoft Excel, Word, and quality-specific software (e.g., Gage InSite). Strong math skills, including fractions, percentages, geometry, and trigonometry. Excellent communication skills and customer-focused mindset. High attention to detail, organization, and dependability. What We Offer Set weekday schedule - no weekends Air-conditioned shop $500 deductible medical insurance, 100% paid by CEM Dental & vision insurance Generous paid time off starting from day 1 Paid holidays from day 1 Annual bonuses 401(k) with 4% company match Quarterly team luncheons and holiday parties Stable, family-owned company with 42 years of zero layoffs Company Description Continental Engineering and Manufacturing (CEM) is a family-owned manufacturing company based in Chaska and Frazee, Minnesota. Since 1983, we've been at the forefront of precision machining, welding, and assembly, which has complemented our original focus on drive shaft components and assemblies. We serve a diverse clientele across North America and beyond, offering CNC horizontal and vertical milling, CNC horizontal and vertical turning (with robotic loading), broaching, hobbing, balancing, painting, welding, assembly, inspection, and stocking programs all supported by continuous investments in upgrading equipment and cutting-edge technology. At Continental, we foster a strong, positive culture that values teamwork, collaboration, respect, and the growth of every individual. With an impressive 42-year history of stability and a proud record of never having a single layoff, we provide our employees with a secure and supportive environment. We invest in our team's future by offering training programs that empower our members to enhance their skills and advance their careers. We are ISO certified and committed to delivering cost-efficient, reliable products while building lasting relationships with customers, vendors, employees, and the community. Our air-conditioned shop, generous benefits, and strong emphasis on work-life balance make us a top choice for manufacturing professionals. Company Description Continental Engineering and Manufacturing (CEM) is a family-owned manufacturing company based in Chaska and Frazee, Minnesota. Since 1983, we've been at the forefront of precision machining, welding, and assembly, which has complemented our original focus on drive shaft components and assemblies. We serve a diverse clientele across North America and beyond, offering CNC horizontal and vertical milling, CNC horizontal and vertical turning (with robotic loading), broaching, hobbing, balancing, painting, welding, assembly, inspection, and stocking programs all supported by continuous investments in upgrading equipment and cutting-edge technology. At Continental, we foster a strong, positive culture that values teamwork, collaboration, respect, and the growth of every individual. With an impressive 42-year history of stability and a proud record of never having a single layoff, we provide our employees with a secure and supportive environment. We invest in our team's future by offering training programs that empower our members to enhance their skills and advance their careers. We are ISO certified and committed to delivering cost-efficient, reliable products while building lasting relationships with customers, vendors, employees, and the community. Our air-conditioned shop, generous benefits, and strong emphasis on work-life balance make us a top choice for manufacturing professionals.

Job Description Job Description Senior Metrologist / CMM Programmer (PC-DMIS)fitchburg, MA 01420 Senior Metrologist / CMM Programmer (PC-DMIS) Micron Solutions is a multifaceted contract manufacturing organization specializing in thermoplastic injection molding, precision machining and finishing, and silver-plated medical sensors for disposable electrodes. We partner with companies of all sizes to deliver manufacturing and assembly solutions that support their success. Our 120,000-square-foot facility in Fitchburg, MA supports projects from concept through commercialization. Micron Products is seeking an experienced Senior Metrologist / CMM Programmer to support our quality assurance and metrology functions. This role is ideal for a highly skilled metrology professional with strong experience in CMM operation and programming, particularly Hexagon PC-DMIS , who is looking to make a meaningful impact within a dynamic manufacturing environment. We understand that experienced metrology professionals are highly sought after. As a result, we are open to discussing flexible work arrangements , including part-time schedules , for candidates with strong metrology and CMM programming expertise. Candidates with substantial Hexagon PC-DMIS experience are encouraged to apply regardless of availability. The Senior Metrologist / CMM Programmer is responsible for supporting quality assurance and metrology activities to ensure products meet internal and customer specifications. This role involves developing and executing measurement strategies, programming and operating CMMs and vision systems, supporting validation activities, analyzing data, identifying root causes of quality issues, and driving continuous improvement initiatives. Program, set up, and operate Coordinate Measuring Machines (CMMs), with a strong emphasis on Hexagon PC-DMIS programming . Program and operate Vision Measurement Systems and other advanced inspection equipment. Develop and implement measurement methodologies for plastic and metal components. Create and maintain CMM programs, inspection plans, and work instructions. Train inspectors and other personnel on measurement methods and inspection requirements. Schedule and manage measurement activities, including Gage R&R and Bias studies. Create, maintain, and support Statistical Process Control (SPC) inspections and data collection systems. Support Micron's Quality Management System requirements. Assist with training related to: Good Documentation Practices (GDP) Statistical Process Control (SPC) Auditing Quality System requirements Promote quality standards and best practices throughout the organization. Good Documentation Practices (GDP) Statistical Process Control (SPC) Auditing Quality System requirements Analyze production and quality data to identify trends, root causes, and improvement opportunities. Support corrective and preventive action activities. Work within statistical sampling plans, including ANSI Z1.4 requirements. Recommend and implement metrology and inspection process improvements. Assist in developing measurement qualifications and validation protocols. Support product and process validation activities through measurement planning, execution, and analysis. Support Engineering, Manufacturing, Product Development, and Quality teams with metrology expertise. Work with customers and suppliers regarding specifications, inspection methods, and acceptance criteria. Provide technical recommendations to ensure product conformance and manufacturability. Qualifications Education & Experience Bachelor's degree in Engineering or a related technical field, or Minimum of five years of experience in a Metrologist, CMM Programmer, or related metrology role.Medical device manufacturing experience preferred. Minimum 3-5 years of hands-on experience operating and programming CMMs. Strong proficiency with Hexagon PC-DMIS programming is highly preferred and considered a key qualification for this role. Proficiency with Vision Measurement Systems, including programming and operation.Strong understanding of dimensional metrology and measurement system analysis.Strong understanding of blueprint reading and Geometric Dimensioning & Tolerancing (GD&T) .Experience performing Gage R&R, Bias Studies, and SPC analysis.Skilled in using optical and mechanical measurement equipment.Working knowledge of plastic injection molding and metal manufacturing processes.Experience with ERP systems (IQMS preferred).Familiarity with ISO 13485 and FDA-regulated manufacturing environments.Proficiency with Microsoft Office and Minitab. ASQ Certified Calibration Technician or equivalent certification. Excellent analytical and problem-solving abilities.Strong organizational and documentation skills.Effective communication and training capabilities.Ability to work independently and manage multiple priorities. Why Join Micron? Flexible scheduling options available.Full-time and part-time candidates will be considered.Opportunity to leverage advanced metrology and CMM programming expertise.High-impact role with significant visibility across the organization.Collaborative environment supporting Engineering, Manufacturing, and Quality teams.Opportunity to drive quality, innovation, and continuous improvement. Candidates with extensive CMM programming experience and strong Hexagon PC-DMIS expertise will receive special consideration regardless of schedule availability. Please note: This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without current or future sponsorship requirements. PM21 PI

Job Description Job Description Zeiss CMM programming experience desired Experience in CMM operation required Strong understanding of GD&T Ability to read prints, drawings and specifications and apply knowledge to determine dimensions and tolerances of finished parts and set up requirements Ability to read and interpret documents such as work instructions, safety rules, operating and maintenance instructions and procedure manuals Ability to complete reports and correspondence in writing Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Ability to apply concepts of algebra and geometry Ability to read and use calipers, micrometers, gauges and other measuring instruments used to perform the job. Ability to use common hand tools required to perform the job Ability to work in group situations Ability to be punctual Company Description Located in Muncie, IN Company Description Located in Muncie, IN

Job Description Job Description NOW HIRING Join our Metrology team in Berlin, CT! Summary of Position: This position will be responsible for developing, maintaining and generating CMM and other metrology programs used to inspect and verify production materials and components. Designs, develops and procures work holding and functional gages. Reviews drawings and specifications to establish correct inspection criteria following best practices. Subject matter expertise in programming languages such as Calypso (preferred) or PC-DMIS as well as GD&T and other relevant ANSI/ASME, or ISO standards. Essential Functions: Develops, verifies, and operates automated inspection programs for first piece, in-process, and final inspections. Proves out programs limiting risk of measurement bias, linearity, reproducibility and reproducibility errors. Understands Alpha and Beta measurement risks and provides appropriate feedback. Maintains automated inspection machines to include probe qualifications, regular cleaning, and inspection of scales. Design and procures fixtures needed to hold products for inspection during product development; sets criteria for instruments and specifications. Supports automatic data collection from measurement equipment to the inspection plans. Supports the development of inspection methods, tool mapping, First Article Inspections (FAI's), and in process checks for manufacturing. Revises inspection programs and documents based on engineering changes, as required. Supports root cause investigation as applicable to automated inspection function, tooling, and programs. Supports Gage R&R (Repeatability and Reproducibility) and other Measurement System Analysis (MSA) studies. Supports calibration of inspection and measurement equipment to ensure traceability to national/international standards; coordinates or performs calibration activities as needed. Develops work instruction and conducts training of designated automated inspection equipment for operators. Other duties and responsibilities as assigned. Qualifications: Knowledge of and the ability to read geometric dimensions and tolerances ASME Y14.5. Knowledge of precision measuring instruments and their application, including but not limited to, CMMs, Vision Systems, and Contracers. Strong verbal and written English language communication skills. Competency with Microsoft Office (i.e. Outlook, Word, Excel, and PowerPoint), Adobe PDF, Experience in 3D modeling and drafting Experience with Calypso CMM or Open DMIS software Ability to work with a variety of functional areas, including R&D, Manufacturing, and QA, as required accomplishing results with minimal guidance. Preferred Qualifications: Regulated manufacturing industry experience (e.g. Aerospace, Defense, Med Device, Pharmaceutical, etc.) Knowledge of and experience with GMP/ISO standards. Experience with CT scanning, White Light and 3D metrology Experience with PC DMIS or Geomeasure Associate's degree preferred or equivalent directly- transferable work experience (Manufacturing or Engineering discipline preferred). Education: Drafting / GD&T CMM programming CAD modeling Vision System programming Experience: Minimum of 3 years of direct experience working with advanced metrology equipment. Travel Requirements: Travel outside of the workplace is possible for up to 10% of the year. Flexibility is needed for last-minute emergencies. Travel may include multiple overnight stays and may occasionally require weekend commitments. Physical Requirements: Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. Perform keyboard entries with frequent operation of a computer. The ability to wear safety equipment such as cut resistant gloves, safety glasses, hearing protection, and slip resistant shoes.

Job Description Job Description Job Overview: SAPA Transmission is seeking an experienced Zeiss CMM Operator / Programmer to support dimensional inspection and quality activities within a manufacturing environment. This role will operate and program Zeiss CMMs, perform first article, in-process, and final inspections, and apply GD&T and metrology principles to verify product conformance to engineering and customer requirements. The role combines CMM operation and programming with hands-on dimensional inspection and quality support throughout the manufacturing environment. Responsibilities: Program, modify, validate, and optimize Zeiss Calypso CMM programs for production, first article inspection (FAI), in-process, and final inspection. Set up and operate Zeiss CMMs and other precision inspection equipment. Perform first article, in-process, final, and manual dimensional inspections. Interpret engineering drawings, CAD models, specifications, and GD&T requirements to develop effective inspection methods. Troubleshoot and improve existing CMM programs and inspection processes to improve accuracy, repeatability, and efficiency. Analyze inspection results and support resolution of dimensional and quality issues. Work with Manufacturing and Engineering to troubleshoot dimensional problems and support corrective and continuous improvement activities. Assist with Measurement Systems Analysis (MSA), Gage Repeatability and Reproducibility (Gage R&R), process capability studies, and gage calibration activities. Maintain inspection programs, records, reports, and quality documentation in accordance with company and customer requirements. Support AS9100 and customer audit requirements. Maintain a safe and organized work environment and perform other duties as assigned. Requirements: High school diploma or equivalent required; technical degree or certification in Metrology, or a related field preferred. Minimum 2 years of Zeiss CMM operation and programming experience required. Experience with Zeiss Calypso software required. Strong blueprint reading GD&T knowledge in accordance with ASME Y14.5. Experience with dimensional inspection and precision measuring equipment, including micrometers, calipers, height gages, and related tools. Ability to interpret Computer-Aided Design (CAD) models, engineering drawings, and technical specifications. Knowledge of Measurement Systems Analysis (MSA), Gage Repeatability and Reproducibility (Gage R&R), and basic statistical quality methods preferred. Aerospace manufacturing or Aerospace Standard 9100 (AS9100) experience preferred. Strong analytical, problem-solving, communication, and organizational skills. Ability to work independently and effectively with Manufacturing, Engineering, and Quality teams. Ability to stand and walk throughout the manufacturing environment and periodically lift up to 35 pounds. Benefits: 6% retirement plan contribution by SAPA Transmission (regardless of employee contribution to 401k plan). Paid Holiday, Time Off (PTO), and sick time. Medical, Rx, dental, vision and life insurance benefits with minimal employee contribution. Short and long-term disability. Monday-Friday, 7:00 AM-3:30 PM

Job Description Job Description We are looking for a CMM Programmer to join our growing company. In this role, you will support our production team, ensuring everything runs smoothly based on the day's production schedule. Our customers drive the work we do. Employees are empowered and driven to provide the best in class service. As an employee, you are well compensated and eligible for paid time off, medical and dental coverage. The CMM Programmer supports the manufacturing operations for the CMM's and all related activities. The CMM Programmer will coordinate and support all activities concerning the Zeiss CMM's including programming, troubleshooting, planned maintenance, annual certifications, repairs, upgrades, etc. They will also be responsible for programming the CMM to measure per drawing specifications and reporting the results. $33.00 per hour Tasks listed are not meant to be all-encompassing: Maintain safety and good housekeeping standards for the site Work under current and approved processes (Shively and Customer) Coordinate, review and present all required reports to management and customers Provide excellent customer service to internal and external customers Coordinate and support all activities concerning the CMMs including programming, troubleshooting, planned maintenance, annual certifications, repairs, upgrades etc. Program the CMM to measure per drawing specifications and report the results Devise and implement new programs and measurement methods that will be used to conduct quality control inspection of incoming material for conformance to specificationManage and program all communications between the gage, the CMM Reporter, Q Das, and report outputs Participate in Gage Recall and Certification tracking activities Report and document Non-Conformances, Corrective Actions, and Continuous Improvements Make decisions within the limits of general standards or procedures Report near misses and incidents and cooperate with investigations Demonstrate and exemplify the Shively Bros. Inc. Core Values Perform other duties as assigned Qualifications: Ability to work independently with little to no supervision Good written and oral communication skills Ability to work well with others, exhibiting teamwork Good interpersonal and leadership skills Ability to multitask Attention to detail Intermediate/Advanced knowledge of materials and tooling Intermediate/Advanced knowledge of gages and CMM's GD&T format knowledge Proficient with Zeiss Calypso and modus 1.6 Renishaw Education and Experience: High school diploma or equivalent preferred Three years of experience in a similar position Physical Requirements : Prolonged periods of standing and sitting at a desk and working on a computer Must be able to lift to 35 pounds at a time Must be able to access and navigate the facility Company Description Become an Employee Owner. Established in 1947, Shively Bros has grown into an industry-leading, North American family of companies. We offer an extensive range of manufacturing and services for manufacturers, including Supply Chain Management, Cutting Tool Presetting, Gage Calibration Management, Lab Management, Engineering Services, Repair/Regrind Management, Scrap Recovery, Business Intelligence Analytics, and Vending or other Point-of-Use Solutions. Company Description Become an Employee Owner. Established in 1947, Shively Bros has grown into an industry-leading, North American family of companies. We offer an extensive range of manufacturing and services for manufacturers, including Supply Chain Management, Cutting Tool Presetting, Gage Calibration Management, Lab Management, Engineering Services, Repair/Regrind Management, Scrap Recovery, Business Intelligence Analytics, and Vending or other Point-of-Use Solutions.

Job Description Job Description Job Summary: The Senior CMM Programmer is responsible for leading the development, optimization, and validation of complex CMM programs for precision measurement of intricate geometries. This role serves as a technical authority in metrology, driving best practices in inspection strategy, data integrity, and process efficiency. The Senior CMM Programmer collaborates cross-functionally to ensure accurate, timely inspection results while mentoring team members and supporting continuous improvement initiatives. This position operates with a high degree of autonomy and partners closely with Quality leadership to align metrology processes with organizational goals. Essential Duties and Responsibilities: • Lead the development, optimization, and validation of advanced CMM programs (online and offline) to meet complex customer specifications and tight tolerances. • Serve as the subject matter expert (SME) for CMM programming, inspection strategies, and metrology best practices. • Oversee program prove-outs, validation, and correlation studies to ensure measurement accuracy and repeatability. • Troubleshoot and resolve complex programming and measurement issues; approve final programs and first article inspections. • Drive continuous improvement initiatives focused on reducing cycle times, improving measurement accuracy, and increasing efficiency. • Establish and maintain standardized programming methodologies, templates, and best practices. • Lead statistical data collection strategies and ensure proper integration with manufacturing and quality systems. • Validate measurement results using secondary inspection methods and ensure compliance with industry standards. • Support and/or lead CMM calibration, maintenance, and system performance verification. • Develop, review, and maintain technical documentation, including work instructions, inspection plans, and operation sheets. • Provide technical leadership, mentorship, and training to CMM programmers and operators. • Coordinate inspection priorities and workflow to ensure timely feedback to production and engineering teams. Additional Responsibilities: • Partner closely with the Quality Manager and cross-functional teams to align metrology strategies with business objectives. • Act as a key liaison between Quality, Engineering, and Manufacturing to resolve technical issues and improve processes. • Lead or contribute to root cause analysis, corrective actions, and continuous improvement projects. • Support cost reduction, quality enhancement, and process optimization initiatives through data-driven analysis. • Interface with customers and auditors as a technical expert in metrology and inspection processes. • Participate in strategic planning for metrology equipment, software, and technology upgrades. • Lead special projects and departmental initiatives as assigned. • Provide backup support for quality assurance functions when needed. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor's degree in Engineering, Manufacturing, or related field; or equivalent combination of education and extensive experience. • 5-10+ years of advanced CMM programming experience, preferably in a high-precision manufacturing environment. • Expert-level proficiency in CMM software (e.g., PC-DMIS, Calypso, or similar platforms). • Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) and blueprint interpretation. • Demonstrated ability to develop complex inspection strategies for tight-tolerance components. • Advanced knowledge of metrology principles, measurement uncertainty, and correlation techniques. • Experience with statistical analysis tools and data-driven decision-making. • Proven leadership, mentoring, and training capabilities. • Strong analytical thinking, problem-solving skills, and attention to detail. • Excellent communication and organizational skills. • Ability to work independently and lead initiatives with minimal supervision. • Good oral and written communication skills. • Strong organization skills. • Work independently with minimal supervision.

Job Description Job Description Essential Duties and Responsibilities: Build Attend Kickoff meeting (Kickoff process) Analyze machine qualification data (Ppk) Discuss machine qualification results Document machine qualification issues and solutions Support correction of machine qualification issues and solutions Input machine geometry data Lead machine qualification Installation Support analysis of customer machine qualification data Pre-Acceptance Measure, evaluate and report noise readings Evaluate statistical runoff and troubleshoot machining process problems Create statistical runoff summaries - Corrective Action Report Create Gage and CMM GR&R & correlation reports Supervisory Responsibilities: Management and coordination of department personnel. Holding staff accountable to project schedules and deadlines. Provide performance feedback and conduct evaluations with staff. Review and approve time sheets and expense reports Training Interviewing and hiring new employees Conduct department orientation Conduct 90-day review with new employees Conduct annual performance review with employees Identify training/development needs (Training Requests) and maintain Determine sources for training Approve outside training Create experiential development assignments Process Owner Responsibilities: Pre-Acceptance Education and Experience: Minimum 4 year technical degree preferred Minimum 10 years automotive and machine tool experience in lieu of degree Job Knowledge, Skills, and Abilities: Hard Skills Human resource rules Microsoft Office Product application capability (specifically Word, Excel, and Power point) Thorough understanding of HUS processes referenced above. Knowledgeable of MIOSHA regulations. Soft Skills Strong planning and project management skills Leadership of installation project team (clarify goals, prioritize tasks, coordinate resources, resolve issues) Effective time management Effective communication with customer, design suppliers, ancillary equipment suppliers, project manager and employees Must be able to effectively communicate technical information Training Requirements: General Safety ISO 9001 Quality System Awareness Physical Demands: Some physical exertion required. Regularly required to sit, stand, walk, and occasionally bend and move about the facility. Personal Protective Equipment: Safety glasses may be required while performing specific tasks. Work Environment: Works in an office environment with regular exposure to HUS and customer plants. May require travel, including internationally. Will be required to perform other duties as requested, directed, or assigned. Company Description HELLER was founded in 1894 as a small craftsmans workshop in Germany. Today a world leading manufacturer with 2,000+ employees, the group develops and produces state-of-the-art machine tools and entire production systems for metal-cutting processes. The HELLER product range comprises 4-axis and 5-axis CNC machining centers, CNC mill/turning centers, CNC machines for crankshaft and camshaft machining, flexible manufacturing systems and a modular range of services. HELLER began its operations in the United States in 1982 and has a production facility in Troy, MI. Company Description HELLER was founded in 1894 as a small craftsmans workshop in Germany. Today a world leading manufacturer with 2,000+ employees, the group develops and produces state-of-the-art machine tools and entire production systems for metal-cutting processes. The HELLER product range comprises 4-axis and 5-axis CNC machining centers, CNC mill/turning centers, CNC machines for crankshaft and camshaft machining, flexible manufacturing systems and a modular range of services. HELLER began its operations in the United States in 1982 and has a production facility in Troy, MI.

Job Description Job Description CMM Programmer Skokie, IL (On-site) Schedule: 1st shift, 7:00 AM to 3:30 PM, Monday through Friday Pay: $30 - $40 and up to 15 hours of optional overtime per week About the Role A well-established manufacturer of electrical and mechanical components is looking for an experienced CMM Programmer to join a small, collaborative quality team. This is a fully onsite, hands-on role responsible for first-piece inspection on CNC setups, vendor incoming inspection, and full assembly checks across a diverse mix of machined and purchased parts. The facility runs Brown and Sharpe DCC CMMs across three models. Existing programs need operator-friendly revisions and new programs will be written as production requires. As the operation grows, this person will also train CMM operators, making communication and a collaborative mindset just as important as technical skill. About the Company This is a stable, well-respected manufacturer with a product mix spanning both commercial and defense markets. The team is tight-knit and the culture values people who show up, contribute, and make those around them better. Overtime is available but never forced. The company invests in its people, and the right candidate will have room to grow. Responsibilities Write, revise, and maintain CMM programs in PC-DMIS across multiple Brown and Sharpe DCC units Perform first-piece inspections for CNC machining setups and vendor incoming inspection Conduct full assembly inspections including GD&T evaluation on complex assemblies Revise existing programs to make them more operator-friendly and efficient Assess current CMM equipment and make recommendations on controller replacement as needed Train CMM operators as headcount is added to the team Operate CMMs directly until operators are onboarded and running independently Troubleshoot inspection and programming issues independently and communicate findings clearly Maintain accurate inspection records and support quality and production teams as needed Requirements High school diploma required; AAS degree or related CMM programming certification is preferred 1-2+ years of PC-DMIS programming experience required PC-DMIS proficiency is required; Calypso experience is a plus Metal fabrication, machining, or related manufacturing industry experience is required; defense, military, or aerospace experience is strongly preferred ITAR familiarity preferred Hands-on competency with manual metrology tools including micrometers, height gauges, and related instruments Experience inspecting machined components, castings, and assemblies with GD&T requirements Ability to work independently, troubleshoot, and manage multiple inspection priorities Team player with a positive attitude and a genuine willingness to both train others and continue learning US citizen or green card holder required Benefits Comprehensive benefits package Stable, onsite role with a consistent schedule and a collaborative team culture This is a role for someone who takes quality personally, communicates well, and wants to be a valued part of a team that depends on their expertise every day. If that describes you, apply now and let's talk. Company Description The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most. With 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change. At JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier. Company Description The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most. With 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change. At JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier.