BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting opportunity as a Technical Specialist 1 - Compression, Technical Specialist 2 - Compression or Sr. Technical Specialist - Compression located at either our Chambersburg Station location at our Chambersburg, PA or Crayne Station Waynesburg, PA. RESPONSIBILITIES Analyze, troubleshoot, and repair electrical distribution, protection, and control systems, including replacement and configuration of component parts. Perform comprehensive testing on substation apparatus (e.g., power factor testing, turns ratio testing, megger tests) and all analytical tests required to ensure reliable operation. Operate substation and station equipment, including switching and grounding activities. Work with Engineering to manage relay settings, passwords, Management of Change processes, and system adjustments. Maintain and test solid-state and microprocessor-based relays, meters (KWH/KW), recorders (sequential event, digital fault), and SCADA-related controls. Support maintenance and calibration of associated station equipment such as generators, motors, variable frequency drives (VFDs), circuit breakers, AC inverters, DC chargers, batteries, HVAC systems, and instrumentation. Recommend and monitor preventive maintenance software and systems Perform site inspections, walk-downs, and maintain accurate drawings and configuration control documentation. Adhere to all applicable safety rules and protocols, including NFPA 70 (National Electric Code), NFPA 70E (Electrical Safety in the Workplace), and Department of Transportation (DOT) regulations. Provide guidance and training to less experienced technicians and operators as needed. May work independently or with others, occasionally work long hours during emergency conditions. Be responsible for tools, test equipment, and vehicles. Experience with synchronous motor systems Preferred Experience Experience in power generation, natural gas processing, petrochemical, or large industrial plant environments. Experience working with GE, SEL, and Beckwith relays. Proficiency in using electrical test equipment, relay software, and relay test equipment. Knowledge of SCADA and remote-control systems. Knowledge, Skills, and Abilities : Deep understanding of plant electrical power generation and distribution systems, and plant utilities (air, water, gas, etc.). Applied knowledge of protective and network relaying, electrical and control systems, including transformers, switchgear, MCCs, VFDs, lighting, HVAC, AC/DC systems, batteries, and control panels. Familiarity with environmental regulations, industrial electrical hazards, and safety requirements for rotating equipment, arc flash, and confined spaces. Strong analytical, deductive reasoning, and problem-solving skills. Excellent oral and written communication skills, including technical writing. Strong computer skills, including Microsoft Word, Excel, and Maximo or similar maintenance management systems. Ability to perform physical duties such as climbing, working at heights, confined space entry, and lifting. Capability to work independently, in teams, and occasionally in emergency or extended-hour conditions. Company housing may be available Technical Specialist I : Performs difficult and complex work requiring strong technical skills and significant knowledge and experience within the functional area or specific engineering discipline. Does not function as a technician in modifying, operating, or maintaining systems or equipment. Provides expert technical support, direction, and advice in analyzing and evaluating systems, equipment, and programs. Plans and conducts work requiring judgment in the independent evaluation, selection, adaptation, and modification of standard techniques, procedures, and criteria. Devises new approaches to problems encountered and develops engineering criteria, ensuring compliance with design criteria and standards. Implements technology within an engineering field. Focuses on the practical application of engineering theories. Determines how to make the designs and plans of engineer's work. Applies scientific and engineering principles and methods, along with technical skills, to support engineering activities. May perform product improvement, testing, field engineering, development, manufacturing construction systems development, quality control, and operational engineering. May perform some design and theoretical work but does not possess the educational background to function as an engineer. May perform the same work as titled Engineers but possesses an engineering degree which is not ABET accredited. May provide technical project management, including scoping, scheduling, budget development, cost tracking, and oversight of complex projects to meet cost and time objectives. Technical Specialist II : In addition to the responsibilities listed for Technical Specialist I, the Technical Specialist II will : Serve at the intermediate and fully proficient level in the Technical Specialist series Be distinguished from the Technical Specialist I by increased complexity in the application of technical and engineering skills and knowledge Sr. Technical Specialist : In addition to the responsibilities listed for Technical Specialist II, the Sr. Technical Specialist will : Serve as the top progression level in the Technical Specialist series Be distinguished from the Technical Specialist 2 by the increased complexity in the application of technical and engineering skills and knowledge Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Technical Specialist 1 : 0-2 years of relevant experience and competencies in applicable discipline. Basic knowledge of engineering principles, theories, and practices. Ability to learn and successfully apply basic knowledge, techniques, skills, and modern tools of mathematics, science, engineering, and technology to solve broadly-defined engineering problems appropriate to the discipline. Ability to learn and design systems, components, or processes meeting specified needs for broadly-defined engineering problems appropriate to the discipline. Good oral, written, and graphical communication skills required, including basic technical writing skills. Ability to learn and conduct standard tests, measurements, and experiments. Ability to function as a member on a technical team. Organizational skills. Ability to prioritize and manage multiple tasks. Basic knowledge of computers, keyboarding skills, and the use of Microsoft Office programs and applicable software programs. Demonstrates questioning attitude, problem solving, analytical, and abstract thinking skills. Technical Specialist 2 : In addition to the qualifications listed for the Technical Specialist 1 - Compression, the Sr Technical Specialist - Compression will possess the following: 3 years of relevant experience and demonstrated competencies in applicable discipline Knowledge of engineering principles, theories and practices Ability to apply knowledge, techniques, skills, and modern tools of mathematics, science, engineering, and technology to solve broadly defined engineering problems appropriate to the discipline Ability to design systems, components, or processes, meeting specified needs for broadly defined engineering problems appropriate to the discipline Effective oral, written, and graphical communication skills, including technical writing Ability to identify and use appropriate technical literature Ability to conduct standard tests, measurements, and experiments Ability to analyze and interpret results to improve processes Ability to function effectively independently and as a member on a technical team Organizational and project management skills Proficient personal computer skills, including knowledge of applicable software programs Sr. Technical Specialist : In addition to the qualifications listed for the Technical Specialist 2 - Compression, the Sr Technical Specialist - Compression will possess the following: 5+ years of relevant experience and demonstrated competencies in applicable discipline. Thorough knowledge of turbines and centrifugal compressors Programming experience preferably with RS Logix 5000 Ability to use and interpret drawings, schematics, technical data and similar documentation Working knowledge of applicable regulations (DOT, EPA, OSHA, etc.), engineering standards, policies and procedures Excellent analytical skills necessary to identify, evaluate and resolve mechanical problems Strong computer skills (Word, Excel, etc.) and ability to learn new applications Effective oral and written communication skills Effective analytical, problem-solving, and decision-making skills Ability to prioritize and handle multiple tasks and projects concurrently Ability to work effectively with others in a team environment Education Bachelor (Typically four years of related . click apply for full job details
08/25/2026
Full time
BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting opportunity as a Technical Specialist 1 - Compression, Technical Specialist 2 - Compression or Sr. Technical Specialist - Compression located at either our Chambersburg Station location at our Chambersburg, PA or Crayne Station Waynesburg, PA. RESPONSIBILITIES Analyze, troubleshoot, and repair electrical distribution, protection, and control systems, including replacement and configuration of component parts. Perform comprehensive testing on substation apparatus (e.g., power factor testing, turns ratio testing, megger tests) and all analytical tests required to ensure reliable operation. Operate substation and station equipment, including switching and grounding activities. Work with Engineering to manage relay settings, passwords, Management of Change processes, and system adjustments. Maintain and test solid-state and microprocessor-based relays, meters (KWH/KW), recorders (sequential event, digital fault), and SCADA-related controls. Support maintenance and calibration of associated station equipment such as generators, motors, variable frequency drives (VFDs), circuit breakers, AC inverters, DC chargers, batteries, HVAC systems, and instrumentation. Recommend and monitor preventive maintenance software and systems Perform site inspections, walk-downs, and maintain accurate drawings and configuration control documentation. Adhere to all applicable safety rules and protocols, including NFPA 70 (National Electric Code), NFPA 70E (Electrical Safety in the Workplace), and Department of Transportation (DOT) regulations. Provide guidance and training to less experienced technicians and operators as needed. May work independently or with others, occasionally work long hours during emergency conditions. Be responsible for tools, test equipment, and vehicles. Experience with synchronous motor systems Preferred Experience Experience in power generation, natural gas processing, petrochemical, or large industrial plant environments. Experience working with GE, SEL, and Beckwith relays. Proficiency in using electrical test equipment, relay software, and relay test equipment. Knowledge of SCADA and remote-control systems. Knowledge, Skills, and Abilities : Deep understanding of plant electrical power generation and distribution systems, and plant utilities (air, water, gas, etc.). Applied knowledge of protective and network relaying, electrical and control systems, including transformers, switchgear, MCCs, VFDs, lighting, HVAC, AC/DC systems, batteries, and control panels. Familiarity with environmental regulations, industrial electrical hazards, and safety requirements for rotating equipment, arc flash, and confined spaces. Strong analytical, deductive reasoning, and problem-solving skills. Excellent oral and written communication skills, including technical writing. Strong computer skills, including Microsoft Word, Excel, and Maximo or similar maintenance management systems. Ability to perform physical duties such as climbing, working at heights, confined space entry, and lifting. Capability to work independently, in teams, and occasionally in emergency or extended-hour conditions. Company housing may be available Technical Specialist I : Performs difficult and complex work requiring strong technical skills and significant knowledge and experience within the functional area or specific engineering discipline. Does not function as a technician in modifying, operating, or maintaining systems or equipment. Provides expert technical support, direction, and advice in analyzing and evaluating systems, equipment, and programs. Plans and conducts work requiring judgment in the independent evaluation, selection, adaptation, and modification of standard techniques, procedures, and criteria. Devises new approaches to problems encountered and develops engineering criteria, ensuring compliance with design criteria and standards. Implements technology within an engineering field. Focuses on the practical application of engineering theories. Determines how to make the designs and plans of engineer's work. Applies scientific and engineering principles and methods, along with technical skills, to support engineering activities. May perform product improvement, testing, field engineering, development, manufacturing construction systems development, quality control, and operational engineering. May perform some design and theoretical work but does not possess the educational background to function as an engineer. May perform the same work as titled Engineers but possesses an engineering degree which is not ABET accredited. May provide technical project management, including scoping, scheduling, budget development, cost tracking, and oversight of complex projects to meet cost and time objectives. Technical Specialist II : In addition to the responsibilities listed for Technical Specialist I, the Technical Specialist II will : Serve at the intermediate and fully proficient level in the Technical Specialist series Be distinguished from the Technical Specialist I by increased complexity in the application of technical and engineering skills and knowledge Sr. Technical Specialist : In addition to the responsibilities listed for Technical Specialist II, the Sr. Technical Specialist will : Serve as the top progression level in the Technical Specialist series Be distinguished from the Technical Specialist 2 by the increased complexity in the application of technical and engineering skills and knowledge Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Technical Specialist 1 : 0-2 years of relevant experience and competencies in applicable discipline. Basic knowledge of engineering principles, theories, and practices. Ability to learn and successfully apply basic knowledge, techniques, skills, and modern tools of mathematics, science, engineering, and technology to solve broadly-defined engineering problems appropriate to the discipline. Ability to learn and design systems, components, or processes meeting specified needs for broadly-defined engineering problems appropriate to the discipline. Good oral, written, and graphical communication skills required, including basic technical writing skills. Ability to learn and conduct standard tests, measurements, and experiments. Ability to function as a member on a technical team. Organizational skills. Ability to prioritize and manage multiple tasks. Basic knowledge of computers, keyboarding skills, and the use of Microsoft Office programs and applicable software programs. Demonstrates questioning attitude, problem solving, analytical, and abstract thinking skills. Technical Specialist 2 : In addition to the qualifications listed for the Technical Specialist 1 - Compression, the Sr Technical Specialist - Compression will possess the following: 3 years of relevant experience and demonstrated competencies in applicable discipline Knowledge of engineering principles, theories and practices Ability to apply knowledge, techniques, skills, and modern tools of mathematics, science, engineering, and technology to solve broadly defined engineering problems appropriate to the discipline Ability to design systems, components, or processes, meeting specified needs for broadly defined engineering problems appropriate to the discipline Effective oral, written, and graphical communication skills, including technical writing Ability to identify and use appropriate technical literature Ability to conduct standard tests, measurements, and experiments Ability to analyze and interpret results to improve processes Ability to function effectively independently and as a member on a technical team Organizational and project management skills Proficient personal computer skills, including knowledge of applicable software programs Sr. Technical Specialist : In addition to the qualifications listed for the Technical Specialist 2 - Compression, the Sr Technical Specialist - Compression will possess the following: 5+ years of relevant experience and demonstrated competencies in applicable discipline. Thorough knowledge of turbines and centrifugal compressors Programming experience preferably with RS Logix 5000 Ability to use and interpret drawings, schematics, technical data and similar documentation Working knowledge of applicable regulations (DOT, EPA, OSHA, etc.), engineering standards, policies and procedures Excellent analytical skills necessary to identify, evaluate and resolve mechanical problems Strong computer skills (Word, Excel, etc.) and ability to learn new applications Effective oral and written communication skills Effective analytical, problem-solving, and decision-making skills Ability to prioritize and handle multiple tasks and projects concurrently Ability to work effectively with others in a team environment Education Bachelor (Typically four years of related . click apply for full job details
Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description Join the Mission: Develop Cutting-Edge Software for Navy Submarines and Aircraft Carriers Are you ready to take your software development skills to the next level and make a real impact? The Shipboard IT organization is looking for passionate entry-level software developers to join our dynamic and growing team. As part of our team, you'll design, develop, and manage mission-critical applications installed onboard Navy submarines and aircraft carriers, contributing directly to their operational capabilities. You'll help drive innovation as you research, conceptualize, and create advanced software solutions while collaborating with a team that values mentorship, teamwork, and forward-thinking ideas. If you're ready to shape the future of naval technology in a collaborative and supportive environment, we want to hear from you! Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineering; or Masters degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineering. Preferred Skills Development experience with C#, Java, Python, Go or other programming languages Working knowledge of software engineering practices and software lifecycle models Familiarity in containerized deployments using Docker or Kubernetes Familiarity in developing automated unit tests or test driven development Familiarity with database architectures Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $63,900.00 - $97,800.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.
08/25/2026
Full time
Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description Join the Mission: Develop Cutting-Edge Software for Navy Submarines and Aircraft Carriers Are you ready to take your software development skills to the next level and make a real impact? The Shipboard IT organization is looking for passionate entry-level software developers to join our dynamic and growing team. As part of our team, you'll design, develop, and manage mission-critical applications installed onboard Navy submarines and aircraft carriers, contributing directly to their operational capabilities. You'll help drive innovation as you research, conceptualize, and create advanced software solutions while collaborating with a team that values mentorship, teamwork, and forward-thinking ideas. If you're ready to shape the future of naval technology in a collaborative and supportive environment, we want to hear from you! Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineering; or Masters degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineering. Preferred Skills Development experience with C#, Java, Python, Go or other programming languages Working knowledge of software engineering practices and software lifecycle models Familiarity in containerized deployments using Docker or Kubernetes Familiarity in developing automated unit tests or test driven development Familiarity with database architectures Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $63,900.00 - $97,800.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.
Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description The Naval Nuclear Laboratory (NNL) Software Architecture and Technology (SWAT) team is responsible for the development and lifecycle support of multiple fleet and student pipeline simulation software products vital to the state-of-the-art, high-fidelity simulators for the Naval Nuclear Propulsion Program (NNPP). The position will provide an opportunity for the successful candidate to research, design, and test software supporting the simulator instructor station software and other infrastructure software and tools vital to the simulation training products. The candidate will work in a technically diverse environment with a team to support the NNPP simulators. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Software Engineering, Computer Engineering, or Computer Science; or Masters degree from an accredited college or university in Software Engineering, Computer Engineering, or Computer Science. Preferred Skills Able to apply modern software engineering practices (e.g., agile development, code reviews, issue tracking). Understanding of secure coding concepts and willingness to learn and apply secure software development practices. Exposure to tools supporting the software development lifecycle, such as: Requirements or issue tracking tools (e.g., Azure DevOps, Jira) Build/CI tools (e.g., GitHub Actions, Jenkins, Azure DevOps) Version control systems (e.g., Git) Academic or project experience programming in C#, C++, and/or Java, including object-oriented design. Experience working on team-based software projects (course projects, labs, internships), including reading and modifying existing code. Familiarity from coursework or projects with some of the following: Full-stack or multi-layered application development (UI, application logic, and data) Inter-process communication or client-server applications Relational databases and basic SQL Demonstrated attention to software quality through documentation and unit testing in class projects or internships. Strong analytical and problem-solving skills, demonstrated through technical coursework, projects, or research. Coursework or project experience with web application development, using technologies such as HTML/CSS, JavaScript, and a web framework (e.g., ASP.NET, React, Angular, or similar). Effective verbal and written communication skills, with the ability to explain technical work to peers and project stakeholders. Interest in real-time or high-fidelity simulation systems, or in learning complex technical domains. Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $63,900.00 - $97,800.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.
08/25/2026
Full time
Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration. Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U.S. Navy's submarines and aircraft carrier Fleets. Looking for a lifetime career? Apply today! Job Description The Naval Nuclear Laboratory (NNL) Software Architecture and Technology (SWAT) team is responsible for the development and lifecycle support of multiple fleet and student pipeline simulation software products vital to the state-of-the-art, high-fidelity simulators for the Naval Nuclear Propulsion Program (NNPP). The position will provide an opportunity for the successful candidate to research, design, and test software supporting the simulator instructor station software and other infrastructure software and tools vital to the simulation training products. The candidate will work in a technically diverse environment with a team to support the NNPP simulators. Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Software Engineering, Computer Engineering, or Computer Science; or Masters degree from an accredited college or university in Software Engineering, Computer Engineering, or Computer Science. Preferred Skills Able to apply modern software engineering practices (e.g., agile development, code reviews, issue tracking). Understanding of secure coding concepts and willingness to learn and apply secure software development practices. Exposure to tools supporting the software development lifecycle, such as: Requirements or issue tracking tools (e.g., Azure DevOps, Jira) Build/CI tools (e.g., GitHub Actions, Jenkins, Azure DevOps) Version control systems (e.g., Git) Academic or project experience programming in C#, C++, and/or Java, including object-oriented design. Experience working on team-based software projects (course projects, labs, internships), including reading and modifying existing code. Familiarity from coursework or projects with some of the following: Full-stack or multi-layered application development (UI, application logic, and data) Inter-process communication or client-server applications Relational databases and basic SQL Demonstrated attention to software quality through documentation and unit testing in class projects or internships. Strong analytical and problem-solving skills, demonstrated through technical coursework, projects, or research. Coursework or project experience with web application development, using technologies such as HTML/CSS, JavaScript, and a web framework (e.g., ASP.NET, React, Angular, or similar). Effective verbal and written communication skills, with the ability to explain technical work to peers and project stakeholders. Interest in real-time or high-fidelity simulation systems, or in learning complex technical domains. Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal & Medical Time Off Paid Parental Leave Flexible Work Schedules Tuition Assistance for Eligible Employees Student Debt Benefit Personal Time Off Sell Program Employee Assistance Program (EAP) Wellness Program Visit us online to view all NNL benefits! Pay Range $63,900.00 - $97,800.00 annually Salary information provided is a general guideline only. Annual salary is based upon candidate experience and qualifications, as well as market and business considerations. The Naval Nuclear Laboratory is operated for the U.S. Department of Energy (DOE) by Fluor Marine Propulsion, LLC (FMP), a wholly owned subsidiary of Fluor Corporation. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston. FMP employees also have an established presence at numerous shipyards and vendor locations. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets. The Naval Nuclear Laboratory is a national asset solely dedicated to the Naval Nuclear Propulsion Program. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. All candidates must be U.S. citizens. Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements for access to classified matter. FMP is a government contractor and maintains a drug free workplace and workforce. All candidates must be able to pass a drug test in compliance with FMP company policy and 10 CFR 707. Marijuana is a Federal Schedule I controlled substance and illegal under Federal Law. Therefore, FMP is required to test for marijuana. Fluor Marine Propulsion, LLC is an Equal Opportunity Employer, including disability/vets. All qualified applicants will receive consideration for employment without regard to race, color, age, sex, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.
Job Description Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
08/25/2026
Full time
Job Description Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
08/25/2026
Full time
Job Description Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
08/25/2026
Full time
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Embedded Software Engineer - Space Systems : Sign-on bonus ($30K max) Job Code: 39248 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: L3Harris Space and Mission Systems is seeking a Lead Embedded Software Engineer for our Wilmington, MA location to join a team of experts developing Embedded Flight Software for space-based imaging payloads. This role requires strong technical depth in low-level embedded software, hardware interfacing, and multi-threaded application development, along with the ability to provide technical leadership and mentorship to junior engineers. The ideal candidate will have experience developing reliable software for mission-critical aerospace or space systems and familiarity with foundational frameworks such as NASA cFS or similar spaceflight software architectures. Essential Functions: Design, develop, test, and maintain embedded C++ software on the Linux operating system for space-based and mission-critical applications. Develop software that interfaces directly with hardware, including low-level I/O control, device communication, register-level interaction, and interrupt processing. Build and maintain multi-threaded applications with attention to determinism, synchronization, resource management, and system performance. Integrate and utilize targeted foundational software frameworks for space applications, such as NASA core Flight System (cFS) or comparable middleware and reusable flight software components. Support software architecture, implementation, debugging, and optimization across the full software development lifecycle. Collaborate closely with systems, hardware, integration, and test teams to ensure software meets mission, interface, and performance requirements. Participate in software bring-up, hardware/software integration, troubleshooting, and verification activities in lab and system environments. Contribute to code reviews, technical planning, software standards, and development best practices to improve quality, maintainability, and compliance. Provide technical leadership, including guiding design decisions, reviewing junior engineers' work products, and mentoring entry-level staff in embedded software development methods and tools. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, or related field and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Ability to obtain a TS/SCI security clearance. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace products. 5+ years experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), and programming languages (C/C++, Python, scripting). Professional experience with DevOps practices, Jenkins, and continuous integration tools. Professional experience working with Versal, MicroBlaze, bare metal development, and kernel/device drivers. Professional experience with embedded command and control for various applications including mechanisms, serial communications and distributed messaging. Preferred Additional Skills: Active Top Secret or TS/SCI clearance is highly preferred Expertise in full spaced-based System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in space payload systems and NASA Core Flight System/Core Flight Executive (cFS/CFE) or similar reusable software framework used in aerospace and spaceflight applications. Experience in Command & Control Software, Sensor Processing Systems, and Optical Systems/telescopes. Knowledge of microprocessor/microcontroller architecture and programming, and familiarity with FPGAs. Understanding of real-time and embedded Linux concepts, including inter-process communication, scheduling, and performance tuning. Experience in estimating large software programs for new business opportunities. Proficiency in release engineering, change and configuration management, and continuous integration. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
08/24/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Embedded Software Engineer - Space Systems : Sign-on bonus ($30K max) Job Code: 39248 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: L3Harris Space and Mission Systems is seeking a Lead Embedded Software Engineer for our Wilmington, MA location to join a team of experts developing Embedded Flight Software for space-based imaging payloads. This role requires strong technical depth in low-level embedded software, hardware interfacing, and multi-threaded application development, along with the ability to provide technical leadership and mentorship to junior engineers. The ideal candidate will have experience developing reliable software for mission-critical aerospace or space systems and familiarity with foundational frameworks such as NASA cFS or similar spaceflight software architectures. Essential Functions: Design, develop, test, and maintain embedded C++ software on the Linux operating system for space-based and mission-critical applications. Develop software that interfaces directly with hardware, including low-level I/O control, device communication, register-level interaction, and interrupt processing. Build and maintain multi-threaded applications with attention to determinism, synchronization, resource management, and system performance. Integrate and utilize targeted foundational software frameworks for space applications, such as NASA core Flight System (cFS) or comparable middleware and reusable flight software components. Support software architecture, implementation, debugging, and optimization across the full software development lifecycle. Collaborate closely with systems, hardware, integration, and test teams to ensure software meets mission, interface, and performance requirements. Participate in software bring-up, hardware/software integration, troubleshooting, and verification activities in lab and system environments. Contribute to code reviews, technical planning, software standards, and development best practices to improve quality, maintainability, and compliance. Provide technical leadership, including guiding design decisions, reviewing junior engineers' work products, and mentoring entry-level staff in embedded software development methods and tools. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, or related field and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Ability to obtain a TS/SCI security clearance. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace products. 5+ years experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), and programming languages (C/C++, Python, scripting). Professional experience with DevOps practices, Jenkins, and continuous integration tools. Professional experience working with Versal, MicroBlaze, bare metal development, and kernel/device drivers. Professional experience with embedded command and control for various applications including mechanisms, serial communications and distributed messaging. Preferred Additional Skills: Active Top Secret or TS/SCI clearance is highly preferred Expertise in full spaced-based System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in space payload systems and NASA Core Flight System/Core Flight Executive (cFS/CFE) or similar reusable software framework used in aerospace and spaceflight applications. Experience in Command & Control Software, Sensor Processing Systems, and Optical Systems/telescopes. Knowledge of microprocessor/microcontroller architecture and programming, and familiarity with FPGAs. Understanding of real-time and embedded Linux concepts, including inter-process communication, scheduling, and performance tuning. Experience in estimating large software programs for new business opportunities. Proficiency in release engineering, change and configuration management, and continuous integration. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
08/24/2026
Full time
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Embedded Software Engineer - Space Systems : Sign-on bonus ($30K max) Job Code: 39248 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: L3Harris Space and Mission Systems is seeking a Lead Embedded Software Engineer for our Wilmington, MA location to join a team of experts developing Embedded Flight Software for space-based imaging payloads. This role requires strong technical depth in low-level embedded software, hardware interfacing, and multi-threaded application development, along with the ability to provide technical leadership and mentorship to junior engineers. The ideal candidate will have experience developing reliable software for mission-critical aerospace or space systems and familiarity with foundational frameworks such as NASA cFS or similar spaceflight software architectures. Essential Functions: Design, develop, test, and maintain embedded C++ software on the Linux operating system for space-based and mission-critical applications. Develop software that interfaces directly with hardware, including low-level I/O control, device communication, register-level interaction, and interrupt processing. Build and maintain multi-threaded applications with attention to determinism, synchronization, resource management, and system performance. Integrate and utilize targeted foundational software frameworks for space applications, such as NASA core Flight System (cFS) or comparable middleware and reusable flight software components. Support software architecture, implementation, debugging, and optimization across the full software development lifecycle. Collaborate closely with systems, hardware, integration, and test teams to ensure software meets mission, interface, and performance requirements. Participate in software bring-up, hardware/software integration, troubleshooting, and verification activities in lab and system environments. Contribute to code reviews, technical planning, software standards, and development best practices to improve quality, maintainability, and compliance. Provide technical leadership, including guiding design decisions, reviewing junior engineers' work products, and mentoring entry-level staff in embedded software development methods and tools. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, or related field and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Ability to obtain a TS/SCI security clearance. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace products. 5+ years experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), and programming languages (C/C++, Python, scripting). Professional experience with DevOps practices, Jenkins, and continuous integration tools. Professional experience working with Versal, MicroBlaze, bare metal development, and kernel/device drivers. Professional experience with embedded command and control for various applications including mechanisms, serial communications and distributed messaging. Preferred Additional Skills: Active Top Secret or TS/SCI clearance is highly preferred Expertise in full spaced-based System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in space payload systems and NASA Core Flight System/Core Flight Executive (cFS/CFE) or similar reusable software framework used in aerospace and spaceflight applications. Experience in Command & Control Software, Sensor Processing Systems, and Optical Systems/telescopes. Knowledge of microprocessor/microcontroller architecture and programming, and familiarity with FPGAs. Understanding of real-time and embedded Linux concepts, including inter-process communication, scheduling, and performance tuning. Experience in estimating large software programs for new business opportunities. Proficiency in release engineering, change and configuration management, and continuous integration. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
08/24/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Embedded Software Engineer - Space Systems : Sign-on bonus ($30K max) Job Code: 39248 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: L3Harris Space and Mission Systems is seeking a Lead Embedded Software Engineer for our Wilmington, MA location to join a team of experts developing Embedded Flight Software for space-based imaging payloads. This role requires strong technical depth in low-level embedded software, hardware interfacing, and multi-threaded application development, along with the ability to provide technical leadership and mentorship to junior engineers. The ideal candidate will have experience developing reliable software for mission-critical aerospace or space systems and familiarity with foundational frameworks such as NASA cFS or similar spaceflight software architectures. Essential Functions: Design, develop, test, and maintain embedded C++ software on the Linux operating system for space-based and mission-critical applications. Develop software that interfaces directly with hardware, including low-level I/O control, device communication, register-level interaction, and interrupt processing. Build and maintain multi-threaded applications with attention to determinism, synchronization, resource management, and system performance. Integrate and utilize targeted foundational software frameworks for space applications, such as NASA core Flight System (cFS) or comparable middleware and reusable flight software components. Support software architecture, implementation, debugging, and optimization across the full software development lifecycle. Collaborate closely with systems, hardware, integration, and test teams to ensure software meets mission, interface, and performance requirements. Participate in software bring-up, hardware/software integration, troubleshooting, and verification activities in lab and system environments. Contribute to code reviews, technical planning, software standards, and development best practices to improve quality, maintainability, and compliance. Provide technical leadership, including guiding design decisions, reviewing junior engineers' work products, and mentoring entry-level staff in embedded software development methods and tools. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, or related field and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Ability to obtain a TS/SCI security clearance. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace products. 5+ years experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), and programming languages (C/C++, Python, scripting). Professional experience with DevOps practices, Jenkins, and continuous integration tools. Professional experience working with Versal, MicroBlaze, bare metal development, and kernel/device drivers. Professional experience with embedded command and control for various applications including mechanisms, serial communications and distributed messaging. Preferred Additional Skills: Active Top Secret or TS/SCI clearance is highly preferred Expertise in full spaced-based System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in space payload systems and NASA Core Flight System/Core Flight Executive (cFS/CFE) or similar reusable software framework used in aerospace and spaceflight applications. Experience in Command & Control Software, Sensor Processing Systems, and Optical Systems/telescopes. Knowledge of microprocessor/microcontroller architecture and programming, and familiarity with FPGAs. Understanding of real-time and embedded Linux concepts, including inter-process communication, scheduling, and performance tuning. Experience in estimating large software programs for new business opportunities. Proficiency in release engineering, change and configuration management, and continuous integration. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00 . This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
08/21/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
08/21/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Entry-Level Loads and Dynamics Engineer to support fixed-wing aircraft programs located in Berkeley, Missouri. As an Entry-Level Loads & Dynamics Engineer, you will support loads and dynamics assessments for various aircraft programs within the air dominance division. This position requires strong analytical problem-solving skills and familiarity with one or more of the following: aerodynamics, aircraft stability and control, structural dynamics (i.e. vibration and shock), aeroelastic stability, and finite element modeling. The ability to effectively coordinate with teammates, internal suppliers, and customers is also required. Position Responsibilities Assist in developing air vehicle requirements Create vehicle-level models for loads and dynamics analysis Perform loads and dynamics analysis to support air vehicle design (e.g. flight and ground simulations for loads, flutter/divergence analysis, noise & vibration assessments) Assist in developing flight and ground test requirements and plans Support ground and flight testing by performing pre-test analysis, real-time monitoring of test conditions, post-processing of test data, and documentation of test results Support airworthiness activities with regulatory agencies and internal/external customers via correspondence, presentations, and documentation Assist in developing vehicle flight envelope and operational limits Occasional travel to test sites and vendor offices. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics, Aeroelasticity, and/or Finite Element Modeling (FEM) Preferred Qualifications (Desired Skills and Experience): Proficiency with a higher-level programming code (e.g. C, Matlab, Python, or similar) Experience with finite element analysis (FEA), vibrations analysis, and/or multi-body dynamics (MBD) Prior experience with air vehicle external loads analysis Prior experience with ground and/or flight testing of air vehicles Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $71,400 - $96,600 Applications for this position will be accepted until Sept. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Award The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
08/21/2026
Full time
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
08/21/2026
Full time
Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Microsoft, Accenture, Salesforce, or Seattle Children's Hospital among other leading organizations in the Seattle/Bellevue Washington area. Are you eligible? You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U.S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor?s degree - You may be required to answer additional screening questions when applying What will you gain? Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Application Development - Banking - Business Operations - IT Support - Project Management - Data Analysis Get the skills and opportunity you need to launch your professional career. 72% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-five thousand dollars per year.
Year Up is seeking an Entry Level Application Developer to join our innovative Information Technology team. This unique position offers the opportunity to integrate technical skills with a meaningful mission in an educational setting. As part of our IT & Data Management department, the successful candidate will be integral to supporting our academic programs and services through the development and maintenance of application solutions. The developer will collaborate extensively with educational staff to understand and meet their technology needs, enhancing both faculty and student experiences. Responsibilities Develop, test, and implement application solutions tailored to the needs of educational staff and students. Work closely with the IT team and various internal stakeholders to define system requirements and customize software applications accordingly. Provide technical support and troubleshooting for applications within the organization. Document all phases of software development including design, testing, and deployment. Participate in continuous learning to stay current with industry and educational technology trends. Assist in training staff and students on the use of new technologies and applications. Required Skills Proficient in several programming languages such as Java, Python, or Java Script. Strong understanding of database management and software development life cycles. Ability to communicate effectively with non-technical staff to gather requirements and deliver solutions. Foundational knowledge of web development frameworks and user interface design.
08/20/2026
Full time
Year Up is seeking an Entry Level Application Developer to join our innovative Information Technology team. This unique position offers the opportunity to integrate technical skills with a meaningful mission in an educational setting. As part of our IT & Data Management department, the successful candidate will be integral to supporting our academic programs and services through the development and maintenance of application solutions. The developer will collaborate extensively with educational staff to understand and meet their technology needs, enhancing both faculty and student experiences. Responsibilities Develop, test, and implement application solutions tailored to the needs of educational staff and students. Work closely with the IT team and various internal stakeholders to define system requirements and customize software applications accordingly. Provide technical support and troubleshooting for applications within the organization. Document all phases of software development including design, testing, and deployment. Participate in continuous learning to stay current with industry and educational technology trends. Assist in training staff and students on the use of new technologies and applications. Required Skills Proficient in several programming languages such as Java, Python, or Java Script. Strong understanding of database management and software development life cycles. Ability to communicate effectively with non-technical staff to gather requirements and deliver solutions. Foundational knowledge of web development frameworks and user interface design.
Description: THE COMPANY For over 40 years, Aero Simulation, Inc. (ASI) has provided quality flight training devices to the US Military. ASI has successfully built numerous training systems with a primary focus on aircrew and maintenance training systems. Our current programs include, but are not limited to, the B-1 Training Systems (Air Force), E-2D Training Systems (Navy), CH-53E Training Devices (USMC), IMOMS (Coast Guard), Navigation, Seamanship, Shiphandling Trainer - NSST (Navy). To learn more about ASI visit Programs- Aero Simulation, Inc. ASI is a 100% employee-owned engineering and manufacturing company committed to supporting the nation's warfighters. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other - and we have fun collaborating, sharing experience and expertise, and learning along the way. We strive to deliver exceptional quality, elevate client relationships, and enrich the careers and lives of our employee-owners. As Employee-Owners, we are invested in the success and continued development of each other and the company. In addition to the Employee Stock Ownership Plan (ESOP), we offer a flexible work environment, generous paid time off, professional development opportunities, industry competitive compensation, and superior benefits to include medical, dental, 401k and more! ASI is a great place to build a career and grow with a company that is dedicated to quality, service and to fostering a community of support for each and every member of the team. To learn more about this opportunity, keep reading! POSITION SUMMARY The Configuration and Data Manager will support Systems Engineering and is responsible for control of the technical configuration of project assets using established processes for organization of individual configuration items, software change control management, software build, software baseline release, data management, configuration status accounting, and configuration auditing in accordance with internal standards. ESSENTIAL DUTIES AND RESPONSIBILITES Support configuration management planning. Develop and maintain program configuration management plan(s) based on customer requirements and internal CM processes. Apply program stipulations for configuration identification, change control, configuration status accounting and configuration audits. Adhere to the established change process so that only approved and validated changes are incorporated into released product. Assist engineering in the software build process followed by manual or automated media creation. Manage the software release process for various developmental environments. Perform software baseline merge tasks in support of programs test and evaluation phases. Work with Information Technology (IT) to administer and maintain version control software. Support software quality assurance process and audits. Handle identification, posting, marking, retrieval, organization, and storage of engineering documentation, customer documentation, military specifications, and industry specifications. Coordinate and participate in Configuration Control Board (CCB) and Physical Configuration Audit (PCA) activities. Assist with CDRL/SDRL (Contract Data Requirements List/Subcontract Data Requirements List) internal development or deliveries to customers when necessary. Support internal audits, customer audits, and performs follow up corrective action when necessary. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. Requirements: EXPERIENCE REQUIREMENTS ENTRY - 0 TO 3 Years MID - 3 to 7 Years SENIOR - 7+ Years Experience with and a strong understanding of Linux command line, file system structure, and basic system administration tools. Experience using Subversion and Git in Windows and Linux environments. ADDITIONAL REQUIRED KNOWLEDGE, SKILLS AND ABILITIES Ability to earn the CompTIA Security+ certification within 60 days of hire. Ability to adjust to fluid configurations and requirements. Familiarity with programming languages such as Python, C++, or other programming languages. Familiarity with Virtual Machines Familiarity with Ansible Familiarity with the following standards and guidance: Military Handbook MIL-HDBK-61A (SE), Configuration Management Guidance. International Standard ISO/IEC/IEEE 12207:2017 Systems and software engineering - Software life cycle processes Specifically clauses 6.3.5 (CM Processes) and 7.2.2 (Software CM Processes) . IEEE Std IEEE Standard for Configuration Management in Systems and Software Engineering. ISO 9001:2015 Quality Management System (QMS). TechAmerica Standard EIA-649-B Configuration Management Standard (American National Standards Institute approved as ANSI/EIA 649-B-2011). EDUCATION REQUIREMENTS Associates of Science in Computer Engineering, Software Engineering, Computer Science, Electrical Engineering with a Software Focus or related field with technical background in a software development environment or equivalent experience. EMPLOYMENT REQUIREMENTS U.S. Citizenship Required: As a federal contractor supporting the U.S. warfighter, it is required that all employees in this role be United States citizens in compliance with government contract and security requirements. Background Check: Must be able to successfully pass an initial background screening. Security Clearance: Must be able to obtain and maintain an active Department of Defense (DoD) security clearance. The selected candidate will be subject to a government security investigation and must meet eligibility requirements for access to classified information, as required by the position. Work Schedule Flexibility: Occasional overtime and alternate shifts may be required to meet customer schedules, critical deadlines, or program milestones. Travel Requirements: Must be able and willing to travel domestically and, on occasion, internationally to customer sites, partner locations, or project meetings in support of contract objectives. Drug-Free Workplace: ASI maintains a Drug-Free Workplace. Applicants and employees are subject to pre-employment and random drug testing in accordance with company policy. Employment Contingency: All employment offers are contingent upon the successful completion of all background checks, security clearance requirements, and drug-screening results. PHYSICAL REQUIREMENTS Candidate must be able to work in small, confined spaces (simulator cockpits) Typically, employees sit comfortably to do their work, interspersed by brief periods of standing, walking, bending carrying papers and books, and extensive periods requiring the use of computer terminals to accomplish work objectives. Additional skills may be required to perform additional task(s) specific to work location, department or line of business. Must be able to travel via car and airplane. Must be able to climb stairs to enter and exit a simulator. WORK ENVIRONMENT Work is primarily performed in an office environment consisting of offices and cubicles with low to moderate noise and bright or dim lighting. The work is fast-paced and sometimes involves extreme deadline pressures. The nature of the work requires a high degree of teamwork and cooperation with other members of the staff as well as external customers. Note: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice. The following policies apply to all areas of employment, including recruitment, hiring, training and development, promotion, transfer, termination, layoff, compensation benefits, social and recreational programs, and all other conditions and privileges of employment in accordance with applicable federal, state, and local laws. Candidate Reasonable Accommodation Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify Aero simulation, Inc. by e-mail at or by calling directly at . ADA Policy It is the policy of ASI to comply with all the relevant and applicable provisions of the Americans with Disabilities Act (ADA) and its Amendments. ASI will not discriminate against any qualified employee or job applicant with respect to any terms, privileges, or conditions of employment because of a person's physical or mental disability. ASI also will make reasonable accommodation wherever necessary for all employees or applicants with handicaps, disabilities, provided that the individual is otherwise qualified to safely perform the duties and assignments connected with the job and provided that any accommodations made are not an undue hardship for ASI. Equal Employment Opportunity ASI is proud to be an Equal Employment Opportunity and Affirmative Action employer dedicated to attracting, retaining, and developing a diverse and inclusive workforce . click apply for full job details
08/20/2026
Full time
Description: THE COMPANY For over 40 years, Aero Simulation, Inc. (ASI) has provided quality flight training devices to the US Military. ASI has successfully built numerous training systems with a primary focus on aircrew and maintenance training systems. Our current programs include, but are not limited to, the B-1 Training Systems (Air Force), E-2D Training Systems (Navy), CH-53E Training Devices (USMC), IMOMS (Coast Guard), Navigation, Seamanship, Shiphandling Trainer - NSST (Navy). To learn more about ASI visit Programs- Aero Simulation, Inc. ASI is a 100% employee-owned engineering and manufacturing company committed to supporting the nation's warfighters. Being 100% employee-owned directly impacts our culture: it drives our decision-making, motivates our teams, increases our productivity, improves retention and contributes to the future success of our company. Our culture is one where we work hard for our clients and for each other - and we have fun collaborating, sharing experience and expertise, and learning along the way. We strive to deliver exceptional quality, elevate client relationships, and enrich the careers and lives of our employee-owners. As Employee-Owners, we are invested in the success and continued development of each other and the company. In addition to the Employee Stock Ownership Plan (ESOP), we offer a flexible work environment, generous paid time off, professional development opportunities, industry competitive compensation, and superior benefits to include medical, dental, 401k and more! ASI is a great place to build a career and grow with a company that is dedicated to quality, service and to fostering a community of support for each and every member of the team. To learn more about this opportunity, keep reading! POSITION SUMMARY The Configuration and Data Manager will support Systems Engineering and is responsible for control of the technical configuration of project assets using established processes for organization of individual configuration items, software change control management, software build, software baseline release, data management, configuration status accounting, and configuration auditing in accordance with internal standards. ESSENTIAL DUTIES AND RESPONSIBILITES Support configuration management planning. Develop and maintain program configuration management plan(s) based on customer requirements and internal CM processes. Apply program stipulations for configuration identification, change control, configuration status accounting and configuration audits. Adhere to the established change process so that only approved and validated changes are incorporated into released product. Assist engineering in the software build process followed by manual or automated media creation. Manage the software release process for various developmental environments. Perform software baseline merge tasks in support of programs test and evaluation phases. Work with Information Technology (IT) to administer and maintain version control software. Support software quality assurance process and audits. Handle identification, posting, marking, retrieval, organization, and storage of engineering documentation, customer documentation, military specifications, and industry specifications. Coordinate and participate in Configuration Control Board (CCB) and Physical Configuration Audit (PCA) activities. Assist with CDRL/SDRL (Contract Data Requirements List/Subcontract Data Requirements List) internal development or deliveries to customers when necessary. Support internal audits, customer audits, and performs follow up corrective action when necessary. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. Requirements: EXPERIENCE REQUIREMENTS ENTRY - 0 TO 3 Years MID - 3 to 7 Years SENIOR - 7+ Years Experience with and a strong understanding of Linux command line, file system structure, and basic system administration tools. Experience using Subversion and Git in Windows and Linux environments. ADDITIONAL REQUIRED KNOWLEDGE, SKILLS AND ABILITIES Ability to earn the CompTIA Security+ certification within 60 days of hire. Ability to adjust to fluid configurations and requirements. Familiarity with programming languages such as Python, C++, or other programming languages. Familiarity with Virtual Machines Familiarity with Ansible Familiarity with the following standards and guidance: Military Handbook MIL-HDBK-61A (SE), Configuration Management Guidance. International Standard ISO/IEC/IEEE 12207:2017 Systems and software engineering - Software life cycle processes Specifically clauses 6.3.5 (CM Processes) and 7.2.2 (Software CM Processes) . IEEE Std IEEE Standard for Configuration Management in Systems and Software Engineering. ISO 9001:2015 Quality Management System (QMS). TechAmerica Standard EIA-649-B Configuration Management Standard (American National Standards Institute approved as ANSI/EIA 649-B-2011). EDUCATION REQUIREMENTS Associates of Science in Computer Engineering, Software Engineering, Computer Science, Electrical Engineering with a Software Focus or related field with technical background in a software development environment or equivalent experience. EMPLOYMENT REQUIREMENTS U.S. Citizenship Required: As a federal contractor supporting the U.S. warfighter, it is required that all employees in this role be United States citizens in compliance with government contract and security requirements. Background Check: Must be able to successfully pass an initial background screening. Security Clearance: Must be able to obtain and maintain an active Department of Defense (DoD) security clearance. The selected candidate will be subject to a government security investigation and must meet eligibility requirements for access to classified information, as required by the position. Work Schedule Flexibility: Occasional overtime and alternate shifts may be required to meet customer schedules, critical deadlines, or program milestones. Travel Requirements: Must be able and willing to travel domestically and, on occasion, internationally to customer sites, partner locations, or project meetings in support of contract objectives. Drug-Free Workplace: ASI maintains a Drug-Free Workplace. Applicants and employees are subject to pre-employment and random drug testing in accordance with company policy. Employment Contingency: All employment offers are contingent upon the successful completion of all background checks, security clearance requirements, and drug-screening results. PHYSICAL REQUIREMENTS Candidate must be able to work in small, confined spaces (simulator cockpits) Typically, employees sit comfortably to do their work, interspersed by brief periods of standing, walking, bending carrying papers and books, and extensive periods requiring the use of computer terminals to accomplish work objectives. Additional skills may be required to perform additional task(s) specific to work location, department or line of business. Must be able to travel via car and airplane. Must be able to climb stairs to enter and exit a simulator. WORK ENVIRONMENT Work is primarily performed in an office environment consisting of offices and cubicles with low to moderate noise and bright or dim lighting. The work is fast-paced and sometimes involves extreme deadline pressures. The nature of the work requires a high degree of teamwork and cooperation with other members of the staff as well as external customers. Note: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications that are required of the employee for the job. Duties, responsibilities, and activities may change at any time with or without notice. The following policies apply to all areas of employment, including recruitment, hiring, training and development, promotion, transfer, termination, layoff, compensation benefits, social and recreational programs, and all other conditions and privileges of employment in accordance with applicable federal, state, and local laws. Candidate Reasonable Accommodation Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify Aero simulation, Inc. by e-mail at or by calling directly at . ADA Policy It is the policy of ASI to comply with all the relevant and applicable provisions of the Americans with Disabilities Act (ADA) and its Amendments. ASI will not discriminate against any qualified employee or job applicant with respect to any terms, privileges, or conditions of employment because of a person's physical or mental disability. ASI also will make reasonable accommodation wherever necessary for all employees or applicants with handicaps, disabilities, provided that the individual is otherwise qualified to safely perform the duties and assignments connected with the job and provided that any accommodations made are not an undue hardship for ASI. Equal Employment Opportunity ASI is proud to be an Equal Employment Opportunity and Affirmative Action employer dedicated to attracting, retaining, and developing a diverse and inclusive workforce . click apply for full job details
