12 jobs found

Job Description If you've ever considered a job in IT, become an Information Technology Specialist in the Army National Guard and expand your skills and experience with complex technologies. In this role, you will be responsible for sending, receiving, and processing messages and data on the Guard's sophisticated networks. You will also maintain and troubleshoot the systems that support the military's logistics and classified data, and build firewalls that can withstand any attempted cyberattack. Job Duties • Maintenance of networks, hardware, and software • Provide customer and network administration services • Construct, edit, and test computer programs Some of the Skills You'll Learn • Use of computer consoles and peripheral equipment • Computer systems concepts • Planning, designing, and testing computer systems Helpful Skills • Interest in computer science • Strong attention to detail • Ability to communicate effectively • Experience in installation of computers Through your training, you will develop the skills and experience to enjoy a civilian career working as a network support technician, data processing technician, or computer programmer in just about any company that uses computers. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an Information Technology Specialist consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 20 weeks of Advanced Individual Training (AIT) with classroom instruction. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description If you've ever considered a job in IT, become an Information Technology Specialist in the Army National Guard and expand your skills and experience with complex technologies. In this role, you will be responsible for sending, receiving, and processing messages and data on the Guard's sophisticated networks. You will also maintain and troubleshoot the systems that support the military's logistics and classified data, and build firewalls that can withstand any attempted cyberattack. Job Duties • Maintenance of networks, hardware, and software • Provide customer and network administration services • Construct, edit, and test computer programs Some of the Skills You'll Learn • Use of computer consoles and peripheral equipment • Computer systems concepts • Planning, designing, and testing computer systems Helpful Skills • Interest in computer science • Strong attention to detail • Ability to communicate effectively • Experience in installation of computers Through your training, you will develop the skills and experience to enjoy a civilian career working as a network support technician, data processing technician, or computer programmer in just about any company that uses computers. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an Information Technology Specialist consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 20 weeks of Advanced Individual Training (AIT) with classroom instruction. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Direct-hire CNC Programmer / Machinist opening in the Pittsburgh, PA area. Pay: $38-$45/hr. Set up and program CNC mills/lathes from blueprints; edit programs at the machine; hold tight tolerances; first-article inspection. Requirements: proven CNC programming/machining experience, blueprint reading, GD&T, precision measuring tools. This is a full-time, direct-hire role. Metro Staffing Partners represents the employer, and it is always 100% free for candidates - you never pay a fee. We place talent in healthcare, skilled trades & maintenance, plant & engineering, and professional/sales/management roles, with 260+ openings nationwide. To apply, respond to this posting and we'll follow up with the direct application link and next steps.

Programmer Job Description: Essential Duties, Responsibilities and Accountabilities: (Include the following; however, other duties may apply.) Develop CNC Programs: Utilize Mastercam to create accurate and efficient CNC programs for parts and fixtures in support of production. Troubleshoot and Adjust CNC Programs: Identify and resolve programming challenges during production, making real-time adjustments or developing CNC programs directly at the machine using G-code as necessary to minimize downtime and ensure production goals are met. Collaborate with Engineering Team: Work closely with engineers to understand design specifications, optimizing programs for manufacturability and production efficiency. Conduct Simulations: Perform simulations and testing of CNC programs to ensure accuracy and performance prior to production implementation. Document Programming Processes: Maintain detailed records of all programming activities, including revisions, updates, and best practices. Support Continuous Improvement: Actively participate in initiatives to enhance programming efficiency and product quality, offering insights based on industry trends. Train Production Staff: Provide guidance and training to production floor personnel on CNC programs, setups, and fixtures, fostering a culture of knowledge sharing. Engage in Meetings and Training: Participate in departmental meetings and complete necessary training to promote personal and team development. Other Assigned Tasks: Assist with additional projects and responsibilities as needed to contribute to overall departmental success. Supervisory Responsibilities: As a Programmer, you will provide guidance to production personnel on CNC programs and fixtures, ensuring adherence to production schedules and quality standards. You will assist in troubleshooting common issues but will refer disciplinary matters to Production Management. Qualifications: To perform this job successfully, an individual must ensure the accuracy of information and be able to multitask in a fast-paced environment. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience: A Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related field is preferred. Equivalent work experience in a CNC machining environment is acceptable. Proficiency in Mastercam or similar software is essential. Language skills: Ability to communicate effectively in English, both verbally and in writing, to convey job instructions and technical information clearly. Mathematical Skills: Ability to perform basic mathematical computations; ability to convert metric units correctly and apply the conversions to practical situations. EIS Legacy is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. PI5efd3dd8c2ab-3121

Description: Weldall Manufacturing is seeking an experienced Brake Press Set-Up Operator to join our fabrication team. This position is responsible for setting up and operating brake press equipment to form and bend metal components according to engineering drawings and customer specifications. The ideal candidate will have strong blueprint reading skills, experience selecting tooling and making program adjustments, and the ability to consistently produce quality parts in a heavy manufacturing environment. This role works closely with fabrication, welding, and quality teams to ensure components meet dimensional and quality requirements. Essential Duties and Responsibilities (Including the following; additional duties may be assigned as needed.) Performs all tasks in a safe and responsible manner. Set up and operate brake press equipment to bend and form metal components according to specifications. Read and interpret blueprints, work orders, manufacturing drawings, and shop documentation. Select, install, and verify proper tooling and machine setup for each job. Determine appropriate forming methods and bend sequences for efficient production. Edit existing machine programs and make machine or setup adjustments as necessary to maintain dimensional accuracy, quality, and productivity. Verify first-piece and final-piece dimensions using calipers, tape measures, squares, protractors, and other measuring equipment. Inspect parts throughout the production process to ensure compliance with quality standards and customer requirements. Move materials and finished components using overhead cranes and forklifts as required. Complete production paperwork and maintain accurate records. Work closely with supervisors, quality personnel, programmers, and other fabrication team members to resolve production issues. Maintain equipment, tooling, and work area in a clean and organized condition. Requirements: Education & Experience High school diploma or equivalent experience required. Minimum three years of brake press setup and operation experience preferred. Strong blueprint reading and dimensional interpretation skills required. Ability to independently determine tooling selection, machine setup, and program adjustments based on material type, thickness, and bend requirements. Experience with 175-ton, 350-ton or larger brake presses preferred. Experience working with structural steel, heavy plate, weldments, and custom fabricated components preferred. Strong understanding of bend deductions, bend allowances, and forming principles preferred. Working knowledge of precision measuring equipment including tape measures, calipers, squares, protractors, and gauges. Ability to work independently with minimal supervision. Ability to prioritize work and perform in a fast-paced manufacturing environment. Must maintain regular attendance and work scheduled shifts. Physical Requirements Ability to lift up to 50 pounds when required. Ability to stand, walk, bend, kneel, and reach throughout the workday. Ability to safely operate overhead cranes and forklifts. Ability to work with large steel components and fabricated assemblies. Specific vision abilities include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. Benefits Weldall offers a highly competitive salary and benefits package starting after 30 days of employment that includes: Free Direct Primary Care, Diagnostic Testing & Many Surgeries Company-paid Dental and Vision (no employee premiums) Short-Term Disability and Life Insurance 401(k), Profit Sharing, Tuition Reimbursement, Company Events & Recognition Programs, and much more Weldall Manufacturing, Inc. is an equal opportunity employer. PI626ea91596d1-8319

Applications Engineer Mason, OH $105,000 - $140,000 Salaried About the Company Hi-Tek is a family-owned and operated business located in Mason, Ohio who has a reputation as both a development and production source for all major gas turbine manufacturers. We offer a clean, climate-controlled environment and quality and safety are paramount. About the Role The Applications Engineer/ CNC Programmer is responsible for providing hands-on support on the manufacturing floor to develop new processes, improve existing protocols, train and mentor machinists, and help find solutions to critical manufacturing issues. The role will be creating programs and or modifying existing programs as needed to establish setup processes for the CNC Mill, Turn, or Grinding departments. CNC Programming and Siemens NX experience is required. THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Responsibilities Applications Engineer/ CNC Programmer Analyzes and translates drawings and specifications of jobs to coordinate set-ups and operations in order to meet manufacturing and production. Determines best-practice processes for various machining operations and designates the proper tooling to ensure quality and cost-effective product delivery. Create tooling paths using CAD/CAM software and properly select the cutting tools that will be needed to generate code for various 3, 4, 5 multi-axis work for milling, turning, and grinding operations. Verify tool path in Vericut Software. Produce setup descriptions and tool lists for machinists. Documents and establishes standards to incorporate engineering changes and improvements. Provide training resources and training instructions of setup procedures and machining processes for machinists. Participate in ongoing conversations with engineers, supervisors, and machinists to resolve any issues related to processes, quality, part completion, and customer satisfaction to aid in continuous improvement to eliminate operating problems, increase productivity, and improve product quality. Participate in the conception and design of complex work-holding/fixtures/gages. Work with tooling vendors to evaluate and obtain the best cutting tool technologies for high-temperature superalloys commonly used in the Gas Turbine Industry. Develop prototypes and test new programs/methods working in a hands-on environment with shop floor personnel to gain feedback on potential improvements. Assists Quality Department in identifying and correcting programming issues that led to non-conformances. Provides time studies, router, and job cost review to ensure standards are up to date and being met. Create and or maintain documentation of all types as required. Follow work instructions, procedures, safety, and company policies as given. Qualifications Applications Engineer/ CNC Programmer 5 + years of Machine Shop experience required - CNC Mill, Lathe, and or Grind. 5+ years as a CNC Programmer. A MUST HAVE 5+ Siemens NX experience is required. A MUST HAVE FANUC and Okuma CNC Controls experience preferred. VERICUT software experience preferred. Must be well-versed in various cutting tools for super alloys. Proficiency in the use of CAD/CAM, word processing, and spreadsheet software. Must meet the definition of a "U.S. person" under ITAR, as set forth in 22 C.F.R. 120.62. Required Skills Applications Engineer/ CNC Programmer Perform under AS9100 standards. Provide leadership to others through example and sharing of knowledge/skills. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra, geometry, and trigonometry. Understand and apply statistical tools. Prioritize tasks. Able to plan, organize, and monitor work of self and others working autonomously and self-direct. Manage multiple projects simultaneously. Ability to read and interpret documents such as blueprints and travelers. Understand and communicate safety rules, operating and maintenance instructions, and procedure manual. Ability to draft routine reports. Ability to speak effectively before customers and/or employees of organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. CNC Programming. Siemens NX experience. Preferred Skills Applications Engineer/ CNC Programmer Experience with advanced manufacturing technology. Ability to create solutions and streamline setup procedures. Best-practices for tooling integration while working in a team environment. Pay range and compensation package Applications Engineer/ CNC Programmer $105,000 -$140,000 THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are a driving force in the success of our company. Hi-Tek is committed to diversity and inclusivity. Monday-Friday, 7:00am-3:30pm Compensation details: 00 Yearly Salary PI52f38e6-

Description: G.S. Precision manufactures critical components for the Aerospace and Defense industries. With 700 employees across four integrated locations totaling 230,000 sq. ft., we draw on 60+ years of experience and cutting-edge technology to deliver consistent, high-quality results. Our Mission & Values : To provide a proud, caring, and safe environment that allows our team to thrive in delivering value to our customers. We encourage creative thinking and problem solving. We grow our company through open communication, strong leadership, and continuous improvement that benefits our customers, employees, their families, and our communities. Our Vision: To be the most trusted global partner in precision manufacturing and assembly of highly engineered mission critical products, recognized for our commitment to innovation, quality, and ability to enable our customers success. Generate Sustained Profitability We offer a competitive benefits package, which includes but not limited to: Comprehensive Health, Dental and Vision Care Coverage (Starting the Next Full Month After Hire) Paid Holidays starting on Day ONE Company Paid Life and AD&D Insurance Company Paid Short-Term Disability 401 (k) Matching Retirement Plan Employer Funded Health Reimbursement Account Flexible Spending Account Generous Paid Time Off Dependent Care Spending Account Employee Assistance Program Educational Assistance Program Employee Referral Bonus Safety Shoe Allowance Prescription Safety Glasses Program Shift Differentials for 2nd and 3rd Shifts Bereavement Leave Position Summary The CMM Operator is responsible for operating Coordinate Measuring Machines (CMMs) to perform dimensional inspections on precision components and assemblies in support of manufacturing and quality objectives. This position executes established CMM programs, verifies product conformance, records inspection results, and identifies nonconforming conditions. The CMM Operator works closely with Manufacturing, Engineering, and Quality to ensure products meet engineering drawings, customer specifications, and quality standards. This role is critical in supporting in-process, first article, and final inspections while maintaining compliance with ISO 9001:2015, AS9100, AS13000, customer requirements, and internal quality procedures. Key Responsibilities CMM Operation Set up and operate Coordinate Measuring Machines (CMMs) using approved inspection programs. Perform in-process, first article, and final dimensional inspections of components and assemblies. Load and secure parts using appropriate fixtures and establish proper alignments for inspection. Verify program selection, probe qualification, and machine readiness prior to inspection. Monitor inspection cycles and ensure accurate measurement results. Notify the CMM Programmer or Quality team of program errors, equipment issues, or measurement discrepancies. Inspection & Quality Verification Interpret engineering drawings, blueprints, specifications, and GD&T to understand inspection requirements. Compare inspection results to engineering and customer requirements. Accurately record measurement data and inspection results. Identify and report nonconforming products or dimensional issues promptly. Segregate and document nonconforming material according to established procedures. Perform visual inspections as required to support dimensional verification. Equipment & Documentation Perform daily CMM startup, shutdown, and verification procedures. Ensure CMM equipment, probes, fixtures, and accessories are maintained in proper working condition. Report equipment malfunctions or calibration concerns to the appropriate personnel. Maintain accurate inspection records, reports, and production documentation. Follow document control procedures to ensure the latest revisions of programs and drawings are used. Production Support Support production by performing timely inspections to minimize delays. Work closely with Manufacturing, Engineering, and Quality personnel to resolve inspection issues. Assist with first article inspections (FAI), PPAP activities, and customer inspections as directed. Participate in continuous improvement efforts by identifying opportunities to improve inspection efficiency and workflow. Maintain a clean, organized, and safe inspection area. Compliance & Safety Follow all company safety policies and procedures. Adhere to ISO 9001, AS9100, AS13000, customer, and internal quality requirements. Handle parts carefully to prevent damage during inspection. Support internal and external audits by providing accurate inspection records when requested. Qualifications Education High school diploma or GED required. Technical certificate or coursework in manufacturing, machining, metrology, or quality inspection is preferred. Experience 1-3 years of experience operating Coordinate Measuring Machines in a manufacturing environment preferred. Aerospace or precision machining experience is highly desirable. Experience performing dimensional inspections using precision measuring equipment. Technical Skills Ability to operate Coordinate Measuring Machines using existing inspection programs. Basic understanding of engineering drawings and GD&T. Experience using precision measuring instruments including calipers, micrometers, height gages, indicators, and gauges. Basic computer skills for entering inspection results and reviewing reports. Ability to read and follow work instructions, inspection plans, and manufacturing documentation. Requirements: Preferred Qualifications Familiarity with PC-DMIS or other CMM software. Knowledge of aerospace quality standards including AS9100. Experience supporting first article inspections and production inspection activities. Key Competencies Strong attention to detail. Commitment to accuracy and quality. Mechanical aptitude. Good organizational and time management skills. Ability to work independently while collaborating effectively with cross-functional teams. Strong communication skills. Dependable, safety-conscious, and quality-focused. Physical Requirements Ability to stand and walk for extended periods. Ability to lift up to 35 pounds occasionally. Manual dexterity to handle precision components and measuring equipment. Ability to distinguish fine details and read precision measurement data. Ability to work in a manufacturing environment with appropriate personal protective equipment (PPE). We are looking for people who are highly motivated with the ability to work in a fast-paced environment. Must be a professional with strong work ethic and comfortable working as part of a team that includes all levels of the organization. Come join our team! G.S. Precision is committed to Equal Opportunity Employer (EOE) and to be in compliance with all Federal, State and local laws that prohibit employment discrimination on the basis of race, color, age, natural origin, ethnicity, religion, gender, pregnancy, marital status, sexual orientation, citizenship, genetic disposition, disability or veteran's status or any other classification protected by State/Federal laws. Compensation details: 20-25 Hourly Wage PI6df63ab56fd5-5496

Job Description Job Description Description: CNC Programmer (1st shift, Full-Time, Onsite only) $32.00 - $36.50/hour Schedule: Monday-Friday, 7:00am-4:00pm POSITION SUMMARY: Under the direction of the Manufacturing Engineer / CNC Programming Team Lead, the experienced CNC Programmer is to assist with the development and provide programming as assigned for computerized machine processes in manufacturing. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Write machining programs for new parts as assigned by the Senior Programmer. 2. Maintain facilities on routings for most current machines. 3. Determines machining process from established drawings/prints. 4. Write machining programs for parts with CAM software. 5. Decide which cutting tools and speeds and feeds are appropriate, considering the design specifications, materials. 6. Run simulation tests. 7. Create set-up sheets for programmed parts. 8. Evaluate programs and determine if improvements can be made to the code to increase efficiency, quality and safety. 9. Review ECN's for possible program changes. Requirements: EDUCATION AND EXPERIENCE: Programming education from a vocational/technical school or 2 years of equivalent experience What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI6c37026a9cbf-1864

Job Description Job Description Description: CNC Programmer (1st shift, Full-Time, Onsite only) $32.00 - $36.50/hour Schedule: Monday-Friday, 7:00am-4:00pm POSITION SUMMARY: Under the direction of the Manufacturing Engineer / CNC Programming Team Lead, the experienced CNC Programmer is to assist with the development and provide programming as assigned for computerized machine processes in manufacturing. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Write machining programs for new parts as assigned by the Senior Programmer. 2. Maintain facilities on routings for most current machines. 3. Determines machining process from established drawings/prints. 4. Write machining programs for parts with CAM software. 5. Decide which cutting tools and speeds and feeds are appropriate, considering the design specifications, materials. 6. Run simulation tests. 7. Create set-up sheets for programmed parts. 8. Evaluate programs and determine if improvements can be made to the code to increase efficiency, quality and safety. 9. Review ECN's for possible program changes. Requirements: EDUCATION AND EXPERIENCE: Programming education from a vocational/technical school or 2 years of equivalent experience What You'll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: Paid Time Off (PTO) 10 paid holidays Medical, dental, and vision insurance HSA and FSA options Company-paid life and AD&D insurance Company-paid Short-term disability (STD) Company-paid Long-term disability (LTD) Employee Assistance Program (EAP) 401k Benefit eligibility begins on the first day of the month following your hire date PI6c37026a9cbf-1864

Description CNC Manufacturing is currently seeking qualified candidates for CNC Set Up Programmers in our Conventional Lathe Department. We are looking for first-shift candidates. Pay rate starts at $35.00/hour depending on skill level and experience. Requirements The Setup Programmer completes setups for Conventional Lathes. Setup Programmers will have the equivalent experience of an advanced machine operator with the ability to maintain production on precision parts. They will maintain quality and safety standards; keep records; and maintain equipment. CNC Manufacturing is willing to provide training for select candidates. There is an opportunity for advancement in this position. Responsibilities • Pull all necessary tooling for each job • Upload and Download programs • Prove out jobs with the ability to change/adjust the program • Manual G-code programming • Create and update set up sheets • Set work offsets • Identify, prepare, and load raw materials and work holding • Use of all inspection equipment, including RAM, Comparator, and CMM • Maintain a clean, organized, and safe work area complying with all Safety and ISO standards • Other duties as required Qualifications & Skills • Proficient Machine Operator with 2-5 years CNC experience; understanding of common material types and coordinate system • Basic understanding of GD&T required • CAD/CAM experience preferred • Ability to finish bringing any part into tolerance after set-up is complete • Understand and edit G-code, M-code & programming experience, Mazatrol preferred • Ability to remove and sharpen most tooling • Ability to create inspection processes for all parts and qualify bench inspection equipment • Ability to qualify part to blueprint Physical Demands and Work Conditions • Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, talking, hearing, visual acuity • Moving, carrying, lifting objects in excess of 50 pounds • Standing for extended periods of time CNC Manufacturing is an industry leading expert in the precision machining of performance critical parts in diverse industries, including dental, defense, and aerospace. The 37,000 sq ft facility in Coatesville, PA features some of the industry's most technologically advanced machining and quality control equipment, enabling CNC Manufacturing to deliver precise parts within the tightest of tolerances. Strict Statistical Process Control (SPC) procedures further ensure the highest quality results, which when combined with streamlined project management expertise, have earned CNC Manufacturing (including sister company, CNC Technology) the coveted DEKRA ISO 9001:2015 certification. CNC Manufacturing celebrates the diversity and expertise of its team members, and proudly employs several armed services veterans. The innovative culture at CNC Manufacturing empowers the team to consistently excel in product quality, reliability, and customer service experience. CNC Manufacturing Benefits include: Medical and Prescription Coverage Dental Insurance Long Term Disability & optional Short Term Disability Life Insurance SIMPLE IRA plan with employer match up to 3% Paid Time off and Holidays All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Compensation details: 35-40 Hourly Wage PIcca99be503b9-2081

Job Description If you've ever considered a job in IT, become an Information Technology Specialist in the Army National Guard and expand your skills and experience with complex technologies. In this role, you will be responsible for sending, receiving, and processing messages and data on the Guard's sophisticated networks. You will also maintain and troubleshoot the systems that support the military's logistics and classified data, and build firewalls that can withstand any attempted cyberattack. Job Duties • Maintenance of networks, hardware, and software • Provide customer and network administration services • Construct, edit, and test computer programs Some of the Skills You'll Learn • Use of computer consoles and peripheral equipment • Computer systems concepts • Planning, designing, and testing computer systems Helpful Skills • Interest in computer science • Strong attention to detail • Ability to communicate effectively • Experience in installation of computers Through your training, you will develop the skills and experience to enjoy a civilian career working as a network support technician, data processing technician, or computer programmer in just about any company that uses computers. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an Information Technology Specialist consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 20 weeks of Advanced Individual Training (AIT) with classroom instruction. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 2941 ZIP Code: 1760 Job Category: Technology and Networking Age Requirements: Must be between the ages of 17 and 35 IT Computer electrical

Job Description If you've ever considered a job in IT, become an Information Technology Specialist in the Army National Guard and expand your skills and experience with complex technologies. In this role, you will be responsible for sending, receiving, and processing messages and data on the Guard's sophisticated networks. You will also maintain and troubleshoot the systems that support the military's logistics and classified data, and build firewalls that can withstand any attempted cyberattack. Job Duties • Maintenance of networks, hardware, and software • Provide customer and network administration services • Construct, edit, and test computer programs Some of the Skills You'll Learn • Use of computer consoles and peripheral equipment • Computer systems concepts • Planning, designing, and testing computer systems Helpful Skills • Interest in computer science • Strong attention to detail • Ability to communicate effectively • Experience in installation of computers Through your training, you will develop the skills and experience to enjoy a civilian career working as a network support technician, data processing technician, or computer programmer in just about any company that uses computers. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for an Information Technology Specialist consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 20 weeks of Advanced Individual Training (AIT) with classroom instruction. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 2925 ZIP Code: 2173 Job Category: Technology and Networking Age Requirements: Must be between the ages of 17 and 35 IT Computer electrical