Automation Engineer Byhalia, MS Salary $85,000 - $95,000 Yearly JOB SUMMARY: The Automation Engineer is responsible for supporting the deployment, integration, and ongoing optimization of automated material handling and warehouse automation systems. This role partners with operations, IT, maintenance, and external vendors to ensure systems operate safely, reliably, and in alignment with business and customer requirements. SUPERVISORY RESPONSIBILITIES: This position does not have direct supervisory responsibility but may provide functional guidance or training support to operators and technicians as needed. ESSENTIAL FUNCTIONS: Responsibilities: Support end-to-end implementation of warehouse automation systems, including installation, testing, commissioning, and stabilization. Provide technical support for integration with WMS, WCS, and WES platforms to ensure reliable system performance and data flow. Troubleshoot automation system issues, perform root-cause analysis, and collaborate with internal teams and vendors to resolve issues. Monitor automation KPIs such as throughput, uptime, and accuracy, and support continuous improvement initiatives. Assist in the development and maintenance of standard operating procedures (SOPs) and training materials for site operators. Coordinate preventive and corrective maintenance activities to ensure optimal system health and minimal downtime. Participate in cross-functional project meetings and provide technical input to support timelines, budgets, and operational readiness. Performs Additional Responsibilities As Assigned QUALIFICATIONS: education and/or experience: Bachelor's degree in Engineering (Mechanical, Industrial, Electrical, or related field),Masters degree is Preferred. 3-5 years of experience in warehouse, distribution, manufacturing, or logistics environments. Hands-on experience supporting automated material handling, robotics, or warehouse automation systems preferred. knowledge, skills and abilities: Working knowledge of warehouse automation systems and controls. Familiarity with WMS, WCS, and WES environments. Strong technical troubleshooting and analytical skills. Proficiency with Microsoft Office tools (Excel, Word, PowerPoint, Outlook). Effective written and verbal communication skills and the ability to work cross-functionally. physical requirements: Ability to spend extended periods walking or standing on the warehouse floor during system installation, testing, and commissioning. Frequent movement between operational areas, including climbing stairs, accessing elevated platforms, and inspecting automation equipment. Ability to wear required personal protective equipment (PPE) such as safety shoes, vest, and hard hat when on-site. Regular use of computers, diagnostic tools, and handheld devices for system monitoring and troubleshooting.
08/05/2026
Full time
Automation Engineer Byhalia, MS Salary $85,000 - $95,000 Yearly JOB SUMMARY: The Automation Engineer is responsible for supporting the deployment, integration, and ongoing optimization of automated material handling and warehouse automation systems. This role partners with operations, IT, maintenance, and external vendors to ensure systems operate safely, reliably, and in alignment with business and customer requirements. SUPERVISORY RESPONSIBILITIES: This position does not have direct supervisory responsibility but may provide functional guidance or training support to operators and technicians as needed. ESSENTIAL FUNCTIONS: Responsibilities: Support end-to-end implementation of warehouse automation systems, including installation, testing, commissioning, and stabilization. Provide technical support for integration with WMS, WCS, and WES platforms to ensure reliable system performance and data flow. Troubleshoot automation system issues, perform root-cause analysis, and collaborate with internal teams and vendors to resolve issues. Monitor automation KPIs such as throughput, uptime, and accuracy, and support continuous improvement initiatives. Assist in the development and maintenance of standard operating procedures (SOPs) and training materials for site operators. Coordinate preventive and corrective maintenance activities to ensure optimal system health and minimal downtime. Participate in cross-functional project meetings and provide technical input to support timelines, budgets, and operational readiness. Performs Additional Responsibilities As Assigned QUALIFICATIONS: education and/or experience: Bachelor's degree in Engineering (Mechanical, Industrial, Electrical, or related field),Masters degree is Preferred. 3-5 years of experience in warehouse, distribution, manufacturing, or logistics environments. Hands-on experience supporting automated material handling, robotics, or warehouse automation systems preferred. knowledge, skills and abilities: Working knowledge of warehouse automation systems and controls. Familiarity with WMS, WCS, and WES environments. Strong technical troubleshooting and analytical skills. Proficiency with Microsoft Office tools (Excel, Word, PowerPoint, Outlook). Effective written and verbal communication skills and the ability to work cross-functionally. physical requirements: Ability to spend extended periods walking or standing on the warehouse floor during system installation, testing, and commissioning. Frequent movement between operational areas, including climbing stairs, accessing elevated platforms, and inspecting automation equipment. Ability to wear required personal protective equipment (PPE) such as safety shoes, vest, and hard hat when on-site. Regular use of computers, diagnostic tools, and handheld devices for system monitoring and troubleshooting.
The Data Center Global Controls team is looking for exceptional individuals to join our Controls organization as a Controls Technician for Service & Construction of the Building Management Systems (BMS) and Electrical Power Monitoring System (EPMS) within Amazon data centers. If you are passionate about the Customer Experience, think and act globally and have the ability to contribute to major new innovations in the area of building controls and automation this is the challenge you are looking for! The candidate will possess technical background and experience in installation, troubleshooting, operations and/or maintenance of field sensors, controllers, wiring, networking and programming associated with the industrial controls systems. The candidate may also have relevant experience operating and maintaining mission critical electrical and mechanical systems. A Controls Technician shall be responsible for participating in the installation, testing, troubleshooting and startup of equipment and controls system associated with the BMS and EPMS system deployment in the data centers. A Controls Technician is expected to actively innovate on behalf of their customers in the area of Data Center building automation. Key job responsibilities Primarily work in and support multiple Data Centers by Deploying, Servicing, and Upgrading BMS and EPMS systems. Mentor and train Facilities team members on operation and control of the BMS and EPMS systems. Audit, maintain, and manage computer enterprise asset management systems for BMS and EPMS installations Manage small to medium size projects and programs. Perform point to point checkouts between field devices and controllers. Perform first-line diagnostics, troubleshooting and maintenance of programming code and hardware associated with the BMS and EPMS in data centers. Perform provisioning process for servers, controllers, industrial PCs and network configurations and communication testing between third party devices and controllers or servers. Installation, replacement, configuration, and calibration of sensors. Able to read and understand Electrical schematics, control panel drawings. Basic understanding of close loop controls, field sensors scaling, and functions typically performed by industrial controllers. Supervise low voltage electrical contractors who performing wiring and installation of field devices in compliance with AWS requirements. Commissioning and systems level testing support. Create red-lined drawings and documentation of systems. Follow change management process to generate work requests and method of procedures. Participate in Factory witnessed tests at vendor's or panel builder's facility. Perform other tasks as assigned by manager. Recommend design improvements based on consultation with users and system operation. Perform root cause analysis during testing and commissioning. Ensure all personnel on site utilize proper safety methodology. Work on-call and a rotating schedule when required and respond to after-hours emergencies. Perform service activities such as monitoring/reviewing ticketing systems, performing root cause analysis, and prioritizing tasks. Actively manage service agreements to include vendor labor scheduling, quality assurance, and financial invoice review. Physical Requirements: Walk jobsites in uneven terrain and work at heights and from ladders. Regularly walk, use hands and fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl. On occasions, lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 1+ years of professional work experience, or experience in technical work related to computer systems and technology components - Technical (Military/ Trade School) School diploma or Associate degree with one year experience related to industrial instrumentation/controls or equivalent electrical or mechanical operations experience. - Minimum one year of experience with mission critical low and medium voltage electrical and/or mechanical systems. PREFERRED QUALIFICATIONS - 1+ years of relevant work in a data center or other critical environment experience - Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling. - Basic understanding of Industrial controls system, controllers, and programming including troubleshooting of industrial controls analog, discrete and networked input/output field signals. - International Society of Automation (ISA) Certified Controls System Technician (CCST) Level I or higher certification. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Herndon - 32.00 - 57.00 USD hourly
08/05/2026
Full time
The Data Center Global Controls team is looking for exceptional individuals to join our Controls organization as a Controls Technician for Service & Construction of the Building Management Systems (BMS) and Electrical Power Monitoring System (EPMS) within Amazon data centers. If you are passionate about the Customer Experience, think and act globally and have the ability to contribute to major new innovations in the area of building controls and automation this is the challenge you are looking for! The candidate will possess technical background and experience in installation, troubleshooting, operations and/or maintenance of field sensors, controllers, wiring, networking and programming associated with the industrial controls systems. The candidate may also have relevant experience operating and maintaining mission critical electrical and mechanical systems. A Controls Technician shall be responsible for participating in the installation, testing, troubleshooting and startup of equipment and controls system associated with the BMS and EPMS system deployment in the data centers. A Controls Technician is expected to actively innovate on behalf of their customers in the area of Data Center building automation. Key job responsibilities Primarily work in and support multiple Data Centers by Deploying, Servicing, and Upgrading BMS and EPMS systems. Mentor and train Facilities team members on operation and control of the BMS and EPMS systems. Audit, maintain, and manage computer enterprise asset management systems for BMS and EPMS installations Manage small to medium size projects and programs. Perform point to point checkouts between field devices and controllers. Perform first-line diagnostics, troubleshooting and maintenance of programming code and hardware associated with the BMS and EPMS in data centers. Perform provisioning process for servers, controllers, industrial PCs and network configurations and communication testing between third party devices and controllers or servers. Installation, replacement, configuration, and calibration of sensors. Able to read and understand Electrical schematics, control panel drawings. Basic understanding of close loop controls, field sensors scaling, and functions typically performed by industrial controllers. Supervise low voltage electrical contractors who performing wiring and installation of field devices in compliance with AWS requirements. Commissioning and systems level testing support. Create red-lined drawings and documentation of systems. Follow change management process to generate work requests and method of procedures. Participate in Factory witnessed tests at vendor's or panel builder's facility. Perform other tasks as assigned by manager. Recommend design improvements based on consultation with users and system operation. Perform root cause analysis during testing and commissioning. Ensure all personnel on site utilize proper safety methodology. Work on-call and a rotating schedule when required and respond to after-hours emergencies. Perform service activities such as monitoring/reviewing ticketing systems, performing root cause analysis, and prioritizing tasks. Actively manage service agreements to include vendor labor scheduling, quality assurance, and financial invoice review. Physical Requirements: Walk jobsites in uneven terrain and work at heights and from ladders. Regularly walk, use hands and fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl. On occasions, lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 1+ years of professional work experience, or experience in technical work related to computer systems and technology components - Technical (Military/ Trade School) School diploma or Associate degree with one year experience related to industrial instrumentation/controls or equivalent electrical or mechanical operations experience. - Minimum one year of experience with mission critical low and medium voltage electrical and/or mechanical systems. PREFERRED QUALIFICATIONS - 1+ years of relevant work in a data center or other critical environment experience - Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling. - Basic understanding of Industrial controls system, controllers, and programming including troubleshooting of industrial controls analog, discrete and networked input/output field signals. - International Society of Automation (ISA) Certified Controls System Technician (CCST) Level I or higher certification. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Herndon - 32.00 - 57.00 USD hourly
As a member of the Global Controls Team, you will collaborate with highly motivated operators, engineers and technicians in the data center industry to maintain and optimize critical infrastructure systems. You will be responsible for troubleshooting and maintaining the Building Management System (BMS) and Electrical Power Monitoring System (EPMS) while developing new processes and standards that drive innovation in the controls space. AWS data centers utilize sophisticated industrial control systems to automatically operate mechanical equipment, maintaining optimal temperature and pressure conditions throughout the facilities. These systems integrate and monitor multiple critical components, including generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic and static transfer switches, air-cooled and water-cooled chillers, pumps, cooling towers, heat exchangers, Computer Room Air Handlers (CRAHs), and air economizers. Within this industrial control system infrastructure, the BMS serves as the primary control platform for all mechanical systems within the data center, while the EPMS functions as the primary monitoring platform for all electrical systems. This position offers the opportunity to work with cutting-edge technology in mission-critical environments while contributing to the reliability and efficiency of AWS's global infrastructure. Expected Travel at 30%. Shift time 7 am to 330 PM Eastern time zone Key job responsibilities Primarily work in and support multiple data centers by deploying, servicing, and upgrading BMS and EPMS systems. Mentor and train Facilities team members on the operation and control of BMS and EPMS systems. Audit, maintain, and manage computer enterprise asset management systems for BMS and EPMS installations. Manage small to medium-sized projects and programs. Perform point-to-point checkouts between field devices and controllers. Perform first-line diagnostics, troubleshooting, and maintenance of programming code and hardware associated with BMS and EPMS in data centers. Execute provisioning processes for servers, controllers, industrial PCs, and network configurations, including communication testing between third-party devices and controllers or servers. Install, replace, configure, and calibrate sensors. Read and interpret electrical schematics and control panel drawings with a basic understanding of closed-loop controls, field sensor scaling, and functions typically performed by industrial controllers. Supervise low-voltage electrical contractors performing wiring and installation of field devices in compliance with AWS requirements. Provide commissioning and systems-level testing support. Create red-lined drawings and documentation of systems. Follow change management processes to generate work requests and methods of procedures. Participate in factory witness tests at vendor or panel builder facilities. Perform root cause analysis during testing and commissioning. Ensure all personnel on site utilize proper safety methodology. Perform service activities including monitoring and reviewing ticketing systems, conducting root cause analysis, and prioritizing tasks. Actively manage service agreements including vendor labor scheduling, quality assurance, and financial invoice review. Participate in material handling tasks such as lifting, carrying, or moving up to 50 lbs of equipment, and utilize OSHA-standard safety equipment including limited weight-bearing work platforms, ladders, step stools, and personal protective equipment (PPE) such as safety harnesses. Perform other tasks as assigned by manager. About the team Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - High school or equivalent diploma - Associate's degree, trade school certification, or other certified training in a related technical field with 1+ years of relevant industrial Controls or HVAC controls experience, OR 3+ years of relevant industrial or HVAC controls experience in lieu of a degree. - Basic understanding of Industrial controls system, knowledge of meters, devices, sensors, relays and troubleshooting utilizing standard hand tools, digital metering, or calibration/diagnostic equipment in a data center, hospitals, large commercial complex, water, power, oil & gas or similar industries. - 1+ years of experience working with low voltage controls, wiring, networking signals, electrical and mechanical systems, computers and operating systems. - Ability to work non-standard hours and differing work rotations/shifts and overtime as required. PREFERRED QUALIFICATIONS - International Society of Automation (ISA) Certified Controls System Technician (CCST) Level I or higher certification. - Experiencing using common communication protocols (MQTT, BACnet, and/or MODBUS). - 5+ years of experience in controls/automation, construction or related field in a technical environment. - Demonstrated understanding of engineering documentation, electrical and mechanical diagrams, and standard operating procedures. - Experience data centers or mission critical environment - Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling. - Prior AWS/Amazon experience - 4+ Yr. Military Service Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, IN, New Carlisle - 32.00 - 57.00 USD hourly
08/05/2026
Full time
As a member of the Global Controls Team, you will collaborate with highly motivated operators, engineers and technicians in the data center industry to maintain and optimize critical infrastructure systems. You will be responsible for troubleshooting and maintaining the Building Management System (BMS) and Electrical Power Monitoring System (EPMS) while developing new processes and standards that drive innovation in the controls space. AWS data centers utilize sophisticated industrial control systems to automatically operate mechanical equipment, maintaining optimal temperature and pressure conditions throughout the facilities. These systems integrate and monitor multiple critical components, including generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic and static transfer switches, air-cooled and water-cooled chillers, pumps, cooling towers, heat exchangers, Computer Room Air Handlers (CRAHs), and air economizers. Within this industrial control system infrastructure, the BMS serves as the primary control platform for all mechanical systems within the data center, while the EPMS functions as the primary monitoring platform for all electrical systems. This position offers the opportunity to work with cutting-edge technology in mission-critical environments while contributing to the reliability and efficiency of AWS's global infrastructure. Expected Travel at 30%. Shift time 7 am to 330 PM Eastern time zone Key job responsibilities Primarily work in and support multiple data centers by deploying, servicing, and upgrading BMS and EPMS systems. Mentor and train Facilities team members on the operation and control of BMS and EPMS systems. Audit, maintain, and manage computer enterprise asset management systems for BMS and EPMS installations. Manage small to medium-sized projects and programs. Perform point-to-point checkouts between field devices and controllers. Perform first-line diagnostics, troubleshooting, and maintenance of programming code and hardware associated with BMS and EPMS in data centers. Execute provisioning processes for servers, controllers, industrial PCs, and network configurations, including communication testing between third-party devices and controllers or servers. Install, replace, configure, and calibrate sensors. Read and interpret electrical schematics and control panel drawings with a basic understanding of closed-loop controls, field sensor scaling, and functions typically performed by industrial controllers. Supervise low-voltage electrical contractors performing wiring and installation of field devices in compliance with AWS requirements. Provide commissioning and systems-level testing support. Create red-lined drawings and documentation of systems. Follow change management processes to generate work requests and methods of procedures. Participate in factory witness tests at vendor or panel builder facilities. Perform root cause analysis during testing and commissioning. Ensure all personnel on site utilize proper safety methodology. Perform service activities including monitoring and reviewing ticketing systems, conducting root cause analysis, and prioritizing tasks. Actively manage service agreements including vendor labor scheduling, quality assurance, and financial invoice review. Participate in material handling tasks such as lifting, carrying, or moving up to 50 lbs of equipment, and utilize OSHA-standard safety equipment including limited weight-bearing work platforms, ladders, step stools, and personal protective equipment (PPE) such as safety harnesses. Perform other tasks as assigned by manager. About the team Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - High school or equivalent diploma - Associate's degree, trade school certification, or other certified training in a related technical field with 1+ years of relevant industrial Controls or HVAC controls experience, OR 3+ years of relevant industrial or HVAC controls experience in lieu of a degree. - Basic understanding of Industrial controls system, knowledge of meters, devices, sensors, relays and troubleshooting utilizing standard hand tools, digital metering, or calibration/diagnostic equipment in a data center, hospitals, large commercial complex, water, power, oil & gas or similar industries. - 1+ years of experience working with low voltage controls, wiring, networking signals, electrical and mechanical systems, computers and operating systems. - Ability to work non-standard hours and differing work rotations/shifts and overtime as required. PREFERRED QUALIFICATIONS - International Society of Automation (ISA) Certified Controls System Technician (CCST) Level I or higher certification. - Experiencing using common communication protocols (MQTT, BACnet, and/or MODBUS). - 5+ years of experience in controls/automation, construction or related field in a technical environment. - Demonstrated understanding of engineering documentation, electrical and mechanical diagrams, and standard operating procedures. - Experience data centers or mission critical environment - Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling. - Prior AWS/Amazon experience - 4+ Yr. Military Service Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, IN, New Carlisle - 32.00 - 57.00 USD hourly
Job Description If you want to know about the requirements for this role, read on for all the relevant information. Job Description Commercial HVAC Service Technician Commercial HVAC Service Technician - Knoxville, TN Perfection Group is hiring skilled Commercial HVAC Service Technicians to serve Knoxville and the surrounding areas. We're looking for dependable, experienced technicians who take pride in solving problems, communicating well with customers, and delivering safe, high-quality work. You'll service a variety of commercial and industrial HVAC systems while receiving the tools, training, and team support needed to continue developing your career. What You'll Do: Troubleshoot, repair, and maintain commercial HVAC and refrigeration equipment, including chillers, boilers, rooftop units, split systems, and heat pumps Diagnose mechanical, electrical, and controls-related issues and identify effective solutions Obtain necessary replacement parts and calibrate equipment according to manufacturer recommendations Explain equipment conditions, recommended repairs, and next steps clearly to customers Perform scheduled preventive maintenance to support reliable, efficient system operation Travel to customer locations throughout the Knoxville service area Coordinate with dispatch and communicate schedule changes or delays promptly Document service calls and resolutions accurately using company software and applications Participate in a rotating emergency on-call schedule, including nights and weekends Maintain a clean, safe work area, company vehicle, and assigned equipment Build positive working relationships with customers, teammates, and leadership Participate in company- and vendor-provided training What We're Looking For: Three to five years of commercial or industrial HVAC service experience preferred Universal EPA Section 608 certification HVAC certification from an accredited technical or trade program High school diploma or equivalent Strong troubleshooting and problem-solving skills Valid driver's license and an acceptable driving record Ability to work independently while contributing to the larger team Professional communication and customer-service skills Commitment to safe, accurate, high-quality work About Perfection Group We believe a well-managed facility can transform our world. Perfection Group designs, builds, and improves facility comfort, efficiency, and health for commercial and industrial customers. We combine personalized, high-quality service with advanced HVAC and facilities-management technology. xibtplm If you're an experienced HVAC technician looking for challenging work, respected customers, and opportunities to continue growing, apply today and build your future with Perfection Group. PI0d1e95ae5aad-254
08/05/2026
Full time
Job Description If you want to know about the requirements for this role, read on for all the relevant information. Job Description Commercial HVAC Service Technician Commercial HVAC Service Technician - Knoxville, TN Perfection Group is hiring skilled Commercial HVAC Service Technicians to serve Knoxville and the surrounding areas. We're looking for dependable, experienced technicians who take pride in solving problems, communicating well with customers, and delivering safe, high-quality work. You'll service a variety of commercial and industrial HVAC systems while receiving the tools, training, and team support needed to continue developing your career. What You'll Do: Troubleshoot, repair, and maintain commercial HVAC and refrigeration equipment, including chillers, boilers, rooftop units, split systems, and heat pumps Diagnose mechanical, electrical, and controls-related issues and identify effective solutions Obtain necessary replacement parts and calibrate equipment according to manufacturer recommendations Explain equipment conditions, recommended repairs, and next steps clearly to customers Perform scheduled preventive maintenance to support reliable, efficient system operation Travel to customer locations throughout the Knoxville service area Coordinate with dispatch and communicate schedule changes or delays promptly Document service calls and resolutions accurately using company software and applications Participate in a rotating emergency on-call schedule, including nights and weekends Maintain a clean, safe work area, company vehicle, and assigned equipment Build positive working relationships with customers, teammates, and leadership Participate in company- and vendor-provided training What We're Looking For: Three to five years of commercial or industrial HVAC service experience preferred Universal EPA Section 608 certification HVAC certification from an accredited technical or trade program High school diploma or equivalent Strong troubleshooting and problem-solving skills Valid driver's license and an acceptable driving record Ability to work independently while contributing to the larger team Professional communication and customer-service skills Commitment to safe, accurate, high-quality work About Perfection Group We believe a well-managed facility can transform our world. Perfection Group designs, builds, and improves facility comfort, efficiency, and health for commercial and industrial customers. We combine personalized, high-quality service with advanced HVAC and facilities-management technology. xibtplm If you're an experienced HVAC technician looking for challenging work, respected customers, and opportunities to continue growing, apply today and build your future with Perfection Group. PI0d1e95ae5aad-254
Automation Engineer Tulsa, OK JOB SUMMARY: The Automation Engineer is responsible for supporting the deployment, integration, and ongoing optimization of automated material handling and warehouse automation systems. This role partners with operations, IT, maintenance, and external vendors to ensure systems operate safely, reliably, and in alignment with business and customer requirements. SUPERVISORY RESPONSIBILITIES: This position does not have direct supervisory responsibility but may provide functional guidance or training support to operators and technicians as needed. ESSENTIAL FUNCTIONS: Responsibilities: Support end-to-end implementation of warehouse automation systems, including installation, testing, commissioning, and stabilization. Provide technical support for integration with WMS, WCS, and WES platforms to ensure reliable system performance and data flow. Troubleshoot automation system issues, perform root-cause analysis, and collaborate with internal teams and vendors to resolve issues. Monitor automation KPIs such as throughput, uptime, and accuracy, and support continuous improvement initiatives. Assist in the development and maintenance of standard operating procedures (SOPs) and training materials for site operators. Coordinate preventive and corrective maintenance activities to ensure optimal system health and minimal downtime. Participate in cross-functional project meetings and provide technical input to support timelines, budgets, and operational readiness. Performs Additional Responsibilities As Assigned QUALIFICATIONS: education and/or experience: Bachelor's degree in Engineering (Mechanical, Industrial, Electrical, or related field),Masters degree is Preferred. 3-5 years of experience in warehouse, distribution, manufacturing, or logistics environments. Hands-on experience supporting automated material handling, robotics, or warehouse automation systems preferred. knowledge, skills and abilities: Working knowledge of warehouse automation systems and controls. Familiarity with WMS, WCS, and WES environments. Strong technical troubleshooting and analytical skills. Proficiency with Microsoft Office tools (Excel, Word, PowerPoint, Outlook). Effective written and verbal communication skills and the ability to work cross-functionally. physical requirements: Ability to spend extended periods walking or standing on the warehouse floor during system installation, testing, and commissioning. Frequent movement between operational areas, including climbing stairs, accessing elevated platforms, and inspecting automation equipment. Ability to wear required personal protective equipment (PPE) such as safety shoes, vest, and hard hat when on-site. Regular use of computers, diagnostic tools, and handheld devices for system monitoring and troubleshooting.
08/05/2026
Full time
Automation Engineer Tulsa, OK JOB SUMMARY: The Automation Engineer is responsible for supporting the deployment, integration, and ongoing optimization of automated material handling and warehouse automation systems. This role partners with operations, IT, maintenance, and external vendors to ensure systems operate safely, reliably, and in alignment with business and customer requirements. SUPERVISORY RESPONSIBILITIES: This position does not have direct supervisory responsibility but may provide functional guidance or training support to operators and technicians as needed. ESSENTIAL FUNCTIONS: Responsibilities: Support end-to-end implementation of warehouse automation systems, including installation, testing, commissioning, and stabilization. Provide technical support for integration with WMS, WCS, and WES platforms to ensure reliable system performance and data flow. Troubleshoot automation system issues, perform root-cause analysis, and collaborate with internal teams and vendors to resolve issues. Monitor automation KPIs such as throughput, uptime, and accuracy, and support continuous improvement initiatives. Assist in the development and maintenance of standard operating procedures (SOPs) and training materials for site operators. Coordinate preventive and corrective maintenance activities to ensure optimal system health and minimal downtime. Participate in cross-functional project meetings and provide technical input to support timelines, budgets, and operational readiness. Performs Additional Responsibilities As Assigned QUALIFICATIONS: education and/or experience: Bachelor's degree in Engineering (Mechanical, Industrial, Electrical, or related field),Masters degree is Preferred. 3-5 years of experience in warehouse, distribution, manufacturing, or logistics environments. Hands-on experience supporting automated material handling, robotics, or warehouse automation systems preferred. knowledge, skills and abilities: Working knowledge of warehouse automation systems and controls. Familiarity with WMS, WCS, and WES environments. Strong technical troubleshooting and analytical skills. Proficiency with Microsoft Office tools (Excel, Word, PowerPoint, Outlook). Effective written and verbal communication skills and the ability to work cross-functionally. physical requirements: Ability to spend extended periods walking or standing on the warehouse floor during system installation, testing, and commissioning. Frequent movement between operational areas, including climbing stairs, accessing elevated platforms, and inspecting automation equipment. Ability to wear required personal protective equipment (PPE) such as safety shoes, vest, and hard hat when on-site. Regular use of computers, diagnostic tools, and handheld devices for system monitoring and troubleshooting.
Southwest Research Institute - Fulltime
San Antonio, Texas
Who We Are: The Propulsion & Energy Machinery Section performs engineering R&D in the fields of industrial heat and power, liquid propulsion, gas turbine combustion, and air-breathing propulsion. Our technologies are powering a cleaner future and advancing state-of-the-art propulsion for air and space flight. Objectives of this Role: Support the design, analysis, and testing of systems and components used in a variety of propulsion and energy processes. Typical application areas include: supercritical CO2 oxy-fuel combustion systems, gas turbine combustion systems, solid-fuel combustion systems, RDEs, and various high speed propulsion applications. Apply principles of machine design, piping/pressure vessel design, process controls and instrumentation, fluid dynamics, thermodynamics, and heat transfer to develop test systems and specify components. Many systems operate at extreme pressure and temperature conditions. Apply knowledge of fabrication methods, assembly, and geometric dimensioning & tolerance (GD&T) to ensure components are designed in a way that can be manufactured and assembled. Utilize CAD software (Solidworks) to develop mechanical designs and visualize component fitments and assemblies. Communicate ideas, results, and other information to coworkers as well as commercial and government clients. Daily and Monthly Responsibilities: Provide analytical and experimental support to more than one project in a team environment. Typical tasks include literature reviews, design, analysis, and simulation development. Use commercial engineering software for design and analysis, such as ANSYS Workbench or ANSYS APDL. Provide mechanical and machine design support for a variety of applications that include power generation, propulsion, and combustion. As needed, work across the Institute to draw on the experience from thousands of engineers and technicians. Contribute and be responsible for technical development of experimental test programs, including developing/operating a new test rig. Take responsibility for testing/rig modifications to meet new project objectives. Support the technical work of other engineers and technicians. Assess the best approach to solve problems and interrogate results for reliability. Provide troubleshooting support for tests and simulations with a firm understanding of theories and concepts using a first-principles approach. Perform mechanical design tasks at the technical direction of senior engineers in support of projects/proposal efforts. Be a problem solver that exercises creativity and judgment to help a team of engineers determine new approaches to solve a wide range of technical problems. Requirements: Requires a Bachelors degree in Mechanical Engineering, Aerospace Engineering, or related engineering degree. 0-5 years: Mechanical design experience applying tools like FEA to predict component/assembly stresses and evaluate fitness for service. 0-5 years: Design, commissioning, and testing experience with high pressure and/or extreme temperature (cryogenic or combustion) process systems. 0-5 years: Experience with industry standards, such as ASME Pressure Vessel Code, ASME B31 Piping Codes, machine assembly, maintenance, and repair. A valid/clear driver's license is required.
08/05/2026
Full time
Who We Are: The Propulsion & Energy Machinery Section performs engineering R&D in the fields of industrial heat and power, liquid propulsion, gas turbine combustion, and air-breathing propulsion. Our technologies are powering a cleaner future and advancing state-of-the-art propulsion for air and space flight. Objectives of this Role: Support the design, analysis, and testing of systems and components used in a variety of propulsion and energy processes. Typical application areas include: supercritical CO2 oxy-fuel combustion systems, gas turbine combustion systems, solid-fuel combustion systems, RDEs, and various high speed propulsion applications. Apply principles of machine design, piping/pressure vessel design, process controls and instrumentation, fluid dynamics, thermodynamics, and heat transfer to develop test systems and specify components. Many systems operate at extreme pressure and temperature conditions. Apply knowledge of fabrication methods, assembly, and geometric dimensioning & tolerance (GD&T) to ensure components are designed in a way that can be manufactured and assembled. Utilize CAD software (Solidworks) to develop mechanical designs and visualize component fitments and assemblies. Communicate ideas, results, and other information to coworkers as well as commercial and government clients. Daily and Monthly Responsibilities: Provide analytical and experimental support to more than one project in a team environment. Typical tasks include literature reviews, design, analysis, and simulation development. Use commercial engineering software for design and analysis, such as ANSYS Workbench or ANSYS APDL. Provide mechanical and machine design support for a variety of applications that include power generation, propulsion, and combustion. As needed, work across the Institute to draw on the experience from thousands of engineers and technicians. Contribute and be responsible for technical development of experimental test programs, including developing/operating a new test rig. Take responsibility for testing/rig modifications to meet new project objectives. Support the technical work of other engineers and technicians. Assess the best approach to solve problems and interrogate results for reliability. Provide troubleshooting support for tests and simulations with a firm understanding of theories and concepts using a first-principles approach. Perform mechanical design tasks at the technical direction of senior engineers in support of projects/proposal efforts. Be a problem solver that exercises creativity and judgment to help a team of engineers determine new approaches to solve a wide range of technical problems. Requirements: Requires a Bachelors degree in Mechanical Engineering, Aerospace Engineering, or related engineering degree. 0-5 years: Mechanical design experience applying tools like FEA to predict component/assembly stresses and evaluate fitness for service. 0-5 years: Design, commissioning, and testing experience with high pressure and/or extreme temperature (cryogenic or combustion) process systems. 0-5 years: Experience with industry standards, such as ASME Pressure Vessel Code, ASME B31 Piping Codes, machine assembly, maintenance, and repair. A valid/clear driver's license is required.
Ready to take on meaningful challenges and shape the next generation of mobility? Joining OPmobility means stepping into a global group with a purpose to keep people and goods moving safely, smarter, and sustainably everywhere. Missions: Ensure HSE policies are deployed and followed Coach and develop team to deliver maximum efficiency in all areas Follows, stabilises and optimises paint processes and results Participates in new product / process (paint line, robots) launches Activties: This role operates under TISAX confidentiality level Level 1 , requiring appropriate handling of sensitive information Works according to HSE requirements (LOTO, cleaning ) and promote safety mindset on day to day basis Ensures safety and security conditions are kept in order within the paint line, alert management in case of any non-conformity or deviance Implements paint standards and exchanges within painting networks best practices Controls and optimizes process parameters Stabilizes and optimizes painting area performance (paint consumption, scraps reduction) Tests and validates technical solutions (OPTIPRO projects, changes in the plant, equipment supplier) Analyses process failures Supports new projects launches in line with OPTIMAP requirements Participates in continuous improvement activities and productivity covering all process areas- cycle times, scrap, downtime, machine / tools and energy Participates in paint assessment. Develops the paint processes and systems ensuring a framework that will achieve world-class standards of quality and service to the customer and to achieve environmental compliance. Own the paint process FMEA and make sure that standardized work practices are being used. Establishes effective communication channels with the team and its people so as to realize their Knowledge and full potential and to make sure that they are working to the same common business goals. Continually develops/drives the paint tech team to deliver best in class processes and standards. Own the technical integrity of paint database and supports introduction plans into plant painting area Ensures quality standards are maintained by the paint tech team. Designs and justifies new improvements and equipment to reduce downtime and increase productivity. Works with other departments to support and solves joint problems - injection, assembly. Participates in paint technicians' recruitment to assess technical abilities. May train and coach paint technicians and operators May program robots or lead paint robots programmers Put in place effective visual management Qualifications: Proven record of delivering results, problem solving and application skills BS in Engineering or equivalent in work experience Minimum of 5 years' experience in paint application field Process orientated with experience of painted plastics parts, equipment management and robots programming knowledge Experience in a large manufacturing environment, with a background to problem solving, deployment of industrial standards and best practices "Lean" application to products, processes and flows At OPmobility, people truly matter. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward. Innovation is therefore not a buzzword, but a natural part of everyday work. You'll grow in an international environment where cutting-edge technologies, industrial excellence, and real-world impact come together to tackle the challenges of tomorrow's automotive industry. Founded in 1946 by Pierre Burelle, OPmobility, known until 2024 as Plastic Omnium, has transformed itself into a player in sustainable and connected mobility. Today, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. With €11.5 billion in revenue in 2025, 152 factories, 40 R&D centers, and nearly 38,100 employees across 28 countries, OPmobility combines global scale with local impact. All driven by a shared ambition to accelerate the automotive energy transition.
08/05/2026
Full time
Ready to take on meaningful challenges and shape the next generation of mobility? Joining OPmobility means stepping into a global group with a purpose to keep people and goods moving safely, smarter, and sustainably everywhere. Missions: Ensure HSE policies are deployed and followed Coach and develop team to deliver maximum efficiency in all areas Follows, stabilises and optimises paint processes and results Participates in new product / process (paint line, robots) launches Activties: This role operates under TISAX confidentiality level Level 1 , requiring appropriate handling of sensitive information Works according to HSE requirements (LOTO, cleaning ) and promote safety mindset on day to day basis Ensures safety and security conditions are kept in order within the paint line, alert management in case of any non-conformity or deviance Implements paint standards and exchanges within painting networks best practices Controls and optimizes process parameters Stabilizes and optimizes painting area performance (paint consumption, scraps reduction) Tests and validates technical solutions (OPTIPRO projects, changes in the plant, equipment supplier) Analyses process failures Supports new projects launches in line with OPTIMAP requirements Participates in continuous improvement activities and productivity covering all process areas- cycle times, scrap, downtime, machine / tools and energy Participates in paint assessment. Develops the paint processes and systems ensuring a framework that will achieve world-class standards of quality and service to the customer and to achieve environmental compliance. Own the paint process FMEA and make sure that standardized work practices are being used. Establishes effective communication channels with the team and its people so as to realize their Knowledge and full potential and to make sure that they are working to the same common business goals. Continually develops/drives the paint tech team to deliver best in class processes and standards. Own the technical integrity of paint database and supports introduction plans into plant painting area Ensures quality standards are maintained by the paint tech team. Designs and justifies new improvements and equipment to reduce downtime and increase productivity. Works with other departments to support and solves joint problems - injection, assembly. Participates in paint technicians' recruitment to assess technical abilities. May train and coach paint technicians and operators May program robots or lead paint robots programmers Put in place effective visual management Qualifications: Proven record of delivering results, problem solving and application skills BS in Engineering or equivalent in work experience Minimum of 5 years' experience in paint application field Process orientated with experience of painted plastics parts, equipment management and robots programming knowledge Experience in a large manufacturing environment, with a background to problem solving, deployment of industrial standards and best practices "Lean" application to products, processes and flows At OPmobility, people truly matter. We are committed to building inclusive teams, promoting diversity and equality, and ensuring that every application is considered fairly - because the future of mobility is built by diverse perspectives, bold ideas, and people who dare to move forward. Innovation is therefore not a buzzword, but a natural part of everyday work. You'll grow in an international environment where cutting-edge technologies, industrial excellence, and real-world impact come together to tackle the challenges of tomorrow's automotive industry. Founded in 1946 by Pierre Burelle, OPmobility, known until 2024 as Plastic Omnium, has transformed itself into a player in sustainable and connected mobility. Today, OPmobility develops technological solutions across four areas of expertise: exterior and lighting systems, the integration of complex modules, technologies related to energy storage, hydrogen and electrification, and a division dedicated to the development of embedded software and digital solutions. With €11.5 billion in revenue in 2025, 152 factories, 40 R&D centers, and nearly 38,100 employees across 28 countries, OPmobility combines global scale with local impact. All driven by a shared ambition to accelerate the automotive energy transition.