Vanteon Corporation
Pittsford, New York
Job Title: Embedded Software Engineer (Sr Levels) Department: Engineering Reports To: Director of Engineering FLSA Status: Exempt Job Summary Vanteon is seeking a Principal Embedded Software Engineer to join our team. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the AMD/Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position; this is not fully inclusive, and management may assign other duties: Analyze system for identification of use cases and development of System Requirement Specifications. Design and implement embedded software, device drivers, and board support packages. Investigate and propose project-related technologies to meet requirements. Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes. Collaborate with hardware and other engineers for design and integration efforts. Define and execute engineering verification and acceptance criteria tests. Mentor more junior engineers. Supervisory Responsibilities None Required Skills & Knowledge Embedded systems software for real-time bare-metal, RTOSs, and embedded Linux-based systems. Multi-threaded programming, distributed design, device driver development, and hardware-level. diagnostics, MAC sublayer, BIOS / Bootloader development and configuration, and interrupt handling. BSP creation and new custom hardware bring-up for bare-metal, RTOS, and embedded Linux platforms. Proficient with C/C++ and able to work at the assembly level for embedded processors. Advanced object-oriented design approaches to reusable software systems design. Experience using embedded tools such as compilers, debuggers, ICE, and emulators. Experience with common build management systems (make, etc.) and git version control systems. Hardware/software interface design experience (SPI, I2C, LVDS, DMA, etc.). Proven track record of successful product completion and deployment. Excellent written and verbal communication and analytical skills. Highly motivated, well-organized self-starter. Desired Skills AMD/Xilinx FPGA HDL, hardware configuration, and block design familiarity. AMD/Xilinx Petalinux/Yocto bring-up, customization, and Zynq hardware integration. ADI ADRV9002 configuration and control. Experience with Python for testing standardization, automation, and test fixturing. Linux Yocto build recipes. Linux kernel and application software development. Linux Ethernet driver stack configuration and routing (OpenWRT, etc.). Experience with common CI/CD tools and containerize development methodologies. Experience with UML design modeling and tools. Secure Bootloaders, Binary Signing and Encryption, and TPM integrations. OpenAmp Education and Experience BS EE/CE/CS/SE 5+ years' experience in embedded systems software Other Requirements Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site. Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours. Physical Requirements Prolonged periods sitting at a desk and working on a computer Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Must be able to lift up to 15 pounds at times. The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer Vanteon Corporation provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Compensation Range A candidate's compensation will depend heavily on their skills and experience and will include a very competitive benefits package. Position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. The estimated range for specific positions associated with this job posting is: Principal Engineer - $115,000 to $135,000 Senior Principal Engineer - $130,000 to $150,000 Applying Applicants should submit a resume and cover letter to Ronnie Ells - . Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data. About Vanteon Vanteon LLC, a wholly owned subsidiary of Performance Drone Works, is an engineering services company specializing in wireless and RF design. We offer Analog, Digital, RF, Hardware, Software, and FPGA design services. At Vanteon, we develop products for companies that range from small start-ups to large Fortune 50 companies. The designs we create include Software-Defined Radio (SDR), Wi-Fi, Bluetooth, etc., for markets such as telecom (3G, 4G, 5G cellular), Aviation, Medical, Government, Industrial, and more. Types of projects include handheld devices, wearables, RADAR, signal/spectrum analyzers, and wireless widgets of all kinds. Vanteon has been voted one of the "Best Companies to Work for in NY" for 15 years running; most times, we've ranked in the top 5.
Job Title: Embedded Software Engineer (Sr Levels) Department: Engineering Reports To: Director of Engineering FLSA Status: Exempt Job Summary Vanteon is seeking a Principal Embedded Software Engineer to join our team. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the AMD/Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position; this is not fully inclusive, and management may assign other duties: Analyze system for identification of use cases and development of System Requirement Specifications. Design and implement embedded software, device drivers, and board support packages. Investigate and propose project-related technologies to meet requirements. Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes. Collaborate with hardware and other engineers for design and integration efforts. Define and execute engineering verification and acceptance criteria tests. Mentor more junior engineers. Supervisory Responsibilities None Required Skills & Knowledge Embedded systems software for real-time bare-metal, RTOSs, and embedded Linux-based systems. Multi-threaded programming, distributed design, device driver development, and hardware-level. diagnostics, MAC sublayer, BIOS / Bootloader development and configuration, and interrupt handling. BSP creation and new custom hardware bring-up for bare-metal, RTOS, and embedded Linux platforms. Proficient with C/C++ and able to work at the assembly level for embedded processors. Advanced object-oriented design approaches to reusable software systems design. Experience using embedded tools such as compilers, debuggers, ICE, and emulators. Experience with common build management systems (make, etc.) and git version control systems. Hardware/software interface design experience (SPI, I2C, LVDS, DMA, etc.). Proven track record of successful product completion and deployment. Excellent written and verbal communication and analytical skills. Highly motivated, well-organized self-starter. Desired Skills AMD/Xilinx FPGA HDL, hardware configuration, and block design familiarity. AMD/Xilinx Petalinux/Yocto bring-up, customization, and Zynq hardware integration. ADI ADRV9002 configuration and control. Experience with Python for testing standardization, automation, and test fixturing. Linux Yocto build recipes. Linux kernel and application software development. Linux Ethernet driver stack configuration and routing (OpenWRT, etc.). Experience with common CI/CD tools and containerize development methodologies. Experience with UML design modeling and tools. Secure Bootloaders, Binary Signing and Encryption, and TPM integrations. OpenAmp Education and Experience BS EE/CE/CS/SE 5+ years' experience in embedded systems software Other Requirements Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site. Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours. Physical Requirements Prolonged periods sitting at a desk and working on a computer Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Must be able to lift up to 15 pounds at times. The physical demands described above represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer Vanteon Corporation provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Compensation Range A candidate's compensation will depend heavily on their skills and experience and will include a very competitive benefits package. Position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. The estimated range for specific positions associated with this job posting is: Principal Engineer - $115,000 to $135,000 Senior Principal Engineer - $130,000 to $150,000 Applying Applicants should submit a resume and cover letter to Ronnie Ells - . Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data. About Vanteon Vanteon LLC, a wholly owned subsidiary of Performance Drone Works, is an engineering services company specializing in wireless and RF design. We offer Analog, Digital, RF, Hardware, Software, and FPGA design services. At Vanteon, we develop products for companies that range from small start-ups to large Fortune 50 companies. The designs we create include Software-Defined Radio (SDR), Wi-Fi, Bluetooth, etc., for markets such as telecom (3G, 4G, 5G cellular), Aviation, Medical, Government, Industrial, and more. Types of projects include handheld devices, wearables, RADAR, signal/spectrum analyzers, and wireless widgets of all kinds. Vanteon has been voted one of the "Best Companies to Work for in NY" for 15 years running; most times, we've ranked in the top 5.
JT4 LLC
Las Vegas, Nevada
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. Job Summary Essential Functions/Duties The Engineer will work primarily within research and development engineering groups with responsibility for a wide variety of tasks. The primary tasking will be a variety of testing tasks using radars. We are looking for engineers with entry to master level skill sets who work well in both theoretical and practical domains as part of an iterative process to create innovative solutions for a multitude of relevant domain challenges as partially described below. These positions generally require the following abilities which are usually performed within an office environment but also in the field: Calculate RF link budgets and expected interference levels for various test scenarios and geometries. Analyze radar signal to noise levels to determine if specified mission criteria can be met. Determine which specific radar and other technical data must be made available and collected to satisfy specified mission requirements. Determine the timing of waveforms to meet specific mission needs without exceeding duty cycle constraints. Design test scenarios and waveform timing to verify proper functioning of EW systems. Perform micro-Doppler analysis of radar returns to determine if mission objectives were met. Perform micro-Doppler analysis of radar returns to determine if presence of radar hardware or timing problems. Track known radar data over time to statistically determine the health of various radar systems and components. Analyze 3-D position and attitude data to determine if planned test objectives were met after test execution. Analyze radar data and statistically determine any anomalies when compared against expected values. Convey complex radar-related information in both written and spoken form for personnel with limited domain knowledge. Determine which signal processing techniques and algorithms to use to process radar returns. Determine sampling and signal processing requirements to collect data on moving targets. Provide software requirements to software team members. Write code (Matlab, Python, etc.) to analyze and assess specific conditions in radar returns. Work independently on multiple tasks. Desired Qualifications Major or Minor in EE or Physics Basic radar signal processing understanding (including phased array and ISAR processing) Basic understanding of all components of the radar range equation Basic understanding of electromagnetic wave propagation and interaction Experience in anechoic chamber or open air RF testing In addition, in a general sense, there may also be other assignments available in planning, performing, and overseeing research, design, development, production, testing, installation, integration, sustainment, operation, and maintenance of radar equipment used for radar testing. The Engineer will may also independently perform a range of design, development, analysis, or review tasks under generally established project deadlines. Requirements Education, Technical, and Work Experience Note: The position may be filled at any of the levels listed below. Applicants must have an engineering degree from an ABET-accredited program. US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required. Applicants must have a valid, state-issued driver's license. Minimum requirements/experience for each level Engineer listed below: Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience. The expected salary range for this position is $106,516.80 to $152,942.64 annually. Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience. The expected salary range for this position is $128,960.00 to $185,161.60 annually. Engineer VI: The candidate must have a Master of Science in Engineering from an ABET-accredited academic institution and 16 years of related engineering experience, or an accredited doctorate degree in engineering and a minimum of 12 years of related engineering experience. Salary The expected salary range for this position is $143,395.20 to $205,899.20 annually. Note: The salary ranges offered for these positions are a good faith description of the expected salary ranges these roles/levels will pay. JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer. Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. Working Conditions Work is performed in a typical office environment with no unusual hazards. Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required. Travel to remote company work locations may be required. Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; JCORP12
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. Job Summary Essential Functions/Duties The Engineer will work primarily within research and development engineering groups with responsibility for a wide variety of tasks. The primary tasking will be a variety of testing tasks using radars. We are looking for engineers with entry to master level skill sets who work well in both theoretical and practical domains as part of an iterative process to create innovative solutions for a multitude of relevant domain challenges as partially described below. These positions generally require the following abilities which are usually performed within an office environment but also in the field: Calculate RF link budgets and expected interference levels for various test scenarios and geometries. Analyze radar signal to noise levels to determine if specified mission criteria can be met. Determine which specific radar and other technical data must be made available and collected to satisfy specified mission requirements. Determine the timing of waveforms to meet specific mission needs without exceeding duty cycle constraints. Design test scenarios and waveform timing to verify proper functioning of EW systems. Perform micro-Doppler analysis of radar returns to determine if mission objectives were met. Perform micro-Doppler analysis of radar returns to determine if presence of radar hardware or timing problems. Track known radar data over time to statistically determine the health of various radar systems and components. Analyze 3-D position and attitude data to determine if planned test objectives were met after test execution. Analyze radar data and statistically determine any anomalies when compared against expected values. Convey complex radar-related information in both written and spoken form for personnel with limited domain knowledge. Determine which signal processing techniques and algorithms to use to process radar returns. Determine sampling and signal processing requirements to collect data on moving targets. Provide software requirements to software team members. Write code (Matlab, Python, etc.) to analyze and assess specific conditions in radar returns. Work independently on multiple tasks. Desired Qualifications Major or Minor in EE or Physics Basic radar signal processing understanding (including phased array and ISAR processing) Basic understanding of all components of the radar range equation Basic understanding of electromagnetic wave propagation and interaction Experience in anechoic chamber or open air RF testing In addition, in a general sense, there may also be other assignments available in planning, performing, and overseeing research, design, development, production, testing, installation, integration, sustainment, operation, and maintenance of radar equipment used for radar testing. The Engineer will may also independently perform a range of design, development, analysis, or review tasks under generally established project deadlines. Requirements Education, Technical, and Work Experience Note: The position may be filled at any of the levels listed below. Applicants must have an engineering degree from an ABET-accredited program. US-only citizenship and eligibility for a Department of Defense Top Secret security clearance are required. Applicants must have a valid, state-issued driver's license. Minimum requirements/experience for each level Engineer listed below: Engineer IV: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 8 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 6 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 4 years of related engineering experience. The expected salary range for this position is $106,516.80 to $152,942.64 annually. Engineer V: The candidate must have a Bachelor of Science in Engineering from an ABET-accredited institution and 14 years of related engineering experience, or have an accredited Master of Science in Engineering with at least 10 years of related engineering experience, or have an accredited doctoral degree in Engineering with at least 8 years of related engineering experience. The expected salary range for this position is $128,960.00 to $185,161.60 annually. Engineer VI: The candidate must have a Master of Science in Engineering from an ABET-accredited academic institution and 16 years of related engineering experience, or an accredited doctorate degree in engineering and a minimum of 12 years of related engineering experience. Salary The expected salary range for this position is $143,395.20 to $205,899.20 annually. Note: The salary ranges offered for these positions are a good faith description of the expected salary ranges these roles/levels will pay. JT4 considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market/business considerations when extending an offer. Benefits Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. Working Conditions Work is performed in a typical office environment with no unusual hazards. Occasional lifting (up to 20 pounds), constant sitting with occasional use of computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required. Travel to remote company work locations may be required. Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; JCORP12