L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Test/Integration Engineer Job Code: 32819 Job Location: Greenville, TX Schedule: 9/80 Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and Technical Specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Requires practical knowledge of job area. Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platform. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. Preferred Additional Skills: Strong applicable test environment experience. Experience with RC135 platforms Strong work ethic; maintaining a sense of urgency to ensure obligations are met. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Test/Integration Engineer Job Code: 32819 Job Location: Greenville, TX Schedule: 9/80 Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and Technical Specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Requires practical knowledge of job area. Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platform. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. Preferred Additional Skills: Strong applicable test environment experience. Experience with RC135 platforms Strong work ethic; maintaining a sense of urgency to ensure obligations are met. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Test/Integration Engineer Job Code: 32819 Job Location: Greenville, TX Schedule: 9/80 Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and Technical Specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Requires practical knowledge of job area. Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platform. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. Preferred Additional Skills: Strong applicable test environment experience. Experience with RC135 platforms Strong work ethic; maintaining a sense of urgency to ensure obligations are met. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Test/Integration Engineer Job Code: 32819 Job Location: Greenville, TX Schedule: 9/80 Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and Technical Specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Requires practical knowledge of job area. Bachelor's Degree and a minimum of 4 years of prior related experience. Graduate Degree or equivalent with 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Must be able to obtain a FAA Class III flight physical Must hold an Active DOD Secret Security Clearance with the ability to obtain TS/SCI Experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platform. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. Preferred Additional Skills: Strong applicable test environment experience. Experience with RC135 platforms Strong work ethic; maintaining a sense of urgency to ensure obligations are met. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. Broad experience in embedded system design and solutions for communications systems. Architect, Implement, and verify complex algorithms in FPGAs and Software Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. Work with cross functional teams as needed to define and refine design requirements and implement. Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
RELOCATION ASSISTANCE: Relocation assistance may be available Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below. CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems has an opening for a Staff Mission Effectiveness/Operations Analysis Engineer to join our team of qualified, diverse individuals within our Systems Engineering organization. This role is located in Melbourne, FL. In this role, you will support the Systems Engineering Integration (SEI) Integrated Product Team (IPT). Key Responsibilities: Perform modeling, simulation, and analysis to support program development, execution, and related research and development projects Develop mission relevant scenarios; assesses operational effectiveness of existing and/or emerging systems and capabilities in representative operational environments Develop new and/or integrates existing system simulation frameworks, weapon systems components to include air vehicle platform, kinematics, sensors, communications, command & control, weapons, and threat performance models and algorithms. Analyze and test next generation tactical assets within an advanced threat environment Develop software to simulate real-time operations and behavior of systems for virtual simulation (man in the loop) testing so that future tactical aircraft can be evaluated in next generation air warfare mission environments. Model operational environments and perform trade studies via computer simulation resulting in recommendations for alternative system architectures and configurations Support the design and development of visualization models and databases for integration with a high fidelity simulation environment used for strategic simulation and training Support evaluations to determine the best frameworks, hardware, capabilities, and tools available to create simulations and experiences that enhance the Virtual Simulation product Ensure performance capabilities of new systems and architectures are traded against cost and mission requirements Communicate across the engineering disciplines and technology areas to integrate capabilities Work independently or in team settings, according to project needs Operate in an agile team environment Interpret modeling and simulation results, develop algorithms and communicate their significance and relevancy in a clear, detailed manner. We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: Must have a Bachelor of Science degree in a Science, Technology, Engineering, or Math (STEM) discipline AND 12 years of related professional/military experience OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company. Must have experience with operations analysis and/or virtual simulation tools (e.g. AFSIM, Brawler, STK, MATLAB) Preferred Qualifications: Experience with MBSE modeling products (e.g. Cameo) Experience with NGTS and/or FORTRAN Experience collaborating on projects with multiple teams and managing relationships through effective communication. Advanced degree in Engineering, Operations Research, Mathematics, Physics, or Computer Science Experience in weapon system level design, integration, test and evaluation An understanding of Integrated Air Defense Systems and capabilities The ability to translate Physics/Mathematics models into real-time simulation algorithms and models Experience with real time simulation/software development Experience working within an Agile workflow using Atlassian Suite products (i.e. Jira, BitBucket) Familiarity with Digital Engineering processes Experience with developing and presenting technical documentation and briefings to the customer and organization leadership Active Top Secret Clearance Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
05/28/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available Is this the next step in your career Find out if you are the right candidate by reading through the complete overview below. CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems has an opening for a Staff Mission Effectiveness/Operations Analysis Engineer to join our team of qualified, diverse individuals within our Systems Engineering organization. This role is located in Melbourne, FL. In this role, you will support the Systems Engineering Integration (SEI) Integrated Product Team (IPT). Key Responsibilities: Perform modeling, simulation, and analysis to support program development, execution, and related research and development projects Develop mission relevant scenarios; assesses operational effectiveness of existing and/or emerging systems and capabilities in representative operational environments Develop new and/or integrates existing system simulation frameworks, weapon systems components to include air vehicle platform, kinematics, sensors, communications, command & control, weapons, and threat performance models and algorithms. Analyze and test next generation tactical assets within an advanced threat environment Develop software to simulate real-time operations and behavior of systems for virtual simulation (man in the loop) testing so that future tactical aircraft can be evaluated in next generation air warfare mission environments. Model operational environments and perform trade studies via computer simulation resulting in recommendations for alternative system architectures and configurations Support the design and development of visualization models and databases for integration with a high fidelity simulation environment used for strategic simulation and training Support evaluations to determine the best frameworks, hardware, capabilities, and tools available to create simulations and experiences that enhance the Virtual Simulation product Ensure performance capabilities of new systems and architectures are traded against cost and mission requirements Communicate across the engineering disciplines and technology areas to integrate capabilities Work independently or in team settings, according to project needs Operate in an agile team environment Interpret modeling and simulation results, develop algorithms and communicate their significance and relevancy in a clear, detailed manner. We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: Must have a Bachelor of Science degree in a Science, Technology, Engineering, or Math (STEM) discipline AND 12 years of related professional/military experience OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company. Must have experience with operations analysis and/or virtual simulation tools (e.g. AFSIM, Brawler, STK, MATLAB) Preferred Qualifications: Experience with MBSE modeling products (e.g. Cameo) Experience with NGTS and/or FORTRAN Experience collaborating on projects with multiple teams and managing relationships through effective communication. Advanced degree in Engineering, Operations Research, Mathematics, Physics, or Computer Science Experience in weapon system level design, integration, test and evaluation An understanding of Integrated Air Defense Systems and capabilities The ability to translate Physics/Mathematics models into real-time simulation algorithms and models Experience with real time simulation/software development Experience working within an Agile workflow using Atlassian Suite products (i.e. Jira, BitBucket) Familiarity with Digital Engineering processes Experience with developing and presenting technical documentation and briefings to the customer and organization leadership Active Top Secret Clearance Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation Check below to see if you have what is needed for this opportunity, and if so, make an application asap. Northrop Grumman Aeronautics Systems has an opening for a Staff Systems Engineer to join our team of qualified, diverse individuals within our Systems Engineering organization. This role is located in Melbourne, FL. The individual will play an essential role in advancing engineering and organizational initiatives by contributing to design, testing, and documentation reviews. They will assess supplier documentation and Statements of Scope of Work (SSOWs) to ensure modeling compliance, working closely with cross-functional teams. In addition, this person will be responsible for developing and updating organizational processes-including diagrams and manuals-facilitating working groups focused on model capabilities, documenting and addressing gaps in modeling efforts, and partnering with engineers to implement new processes, standards, or products. Key Responsibilities: Decompose system requirements into lower-level specifications. Coordinate requirement verification and traceability to modeling efforts. Define and drive system use cases and concepts of operations. Facilitate and support working groups focused on model capabilities and usage. Collaborate with engineers to implement new processes, standards, or products for model implementation. Participates in documentation, design, and test reviews We offer flexible work arrangements, a 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: Must have a Bachelor of Science degree in a STEM (Science, Technology, Engineering, or Math) discipline AND 12 years of related professional/military experience, OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience. Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company. Must have experience in Microsoft Office Suite. Must have experience with requirements and government regulations. Must have experience assessing and managing program risks. Preferred Qualifications: Familiarity with Atlassian tools and Agile software development methodologies Basic understanding of Cameo software Active Top-Secret clearance and active program access are highly desirable Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
05/28/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation Check below to see if you have what is needed for this opportunity, and if so, make an application asap. Northrop Grumman Aeronautics Systems has an opening for a Staff Systems Engineer to join our team of qualified, diverse individuals within our Systems Engineering organization. This role is located in Melbourne, FL. The individual will play an essential role in advancing engineering and organizational initiatives by contributing to design, testing, and documentation reviews. They will assess supplier documentation and Statements of Scope of Work (SSOWs) to ensure modeling compliance, working closely with cross-functional teams. In addition, this person will be responsible for developing and updating organizational processes-including diagrams and manuals-facilitating working groups focused on model capabilities, documenting and addressing gaps in modeling efforts, and partnering with engineers to implement new processes, standards, or products. Key Responsibilities: Decompose system requirements into lower-level specifications. Coordinate requirement verification and traceability to modeling efforts. Define and drive system use cases and concepts of operations. Facilitate and support working groups focused on model capabilities and usage. Collaborate with engineers to implement new processes, standards, or products for model implementation. Participates in documentation, design, and test reviews We offer flexible work arrangements, a 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: Must have a Bachelor of Science degree in a STEM (Science, Technology, Engineering, or Math) discipline AND 12 years of related professional/military experience, OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience. Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company. Must have experience in Microsoft Office Suite. Must have experience with requirements and government regulations. Must have experience assessing and managing program risks. Preferred Qualifications: Familiarity with Atlassian tools and Agile software development methodologies Basic understanding of Cameo software Active Top-Secret clearance and active program access are highly desirable Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
RELOCATION ASSISTANCE: Relocation assistance may be available For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems sector is seeking a highly motivated Staff Test Engineer Instrumentation to join our team of qualified, diverse individuals within our Test & Evaluation organization. This role is located in Melbourne, FL. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. This is an individual contributor role with no direct reports. As a Staff Test Engineer Instrumentation Engineer you'll contribute to the design, development, integration, configuration and testing of lab and flight test Data Acquisition Systems. In this role you will be responsible for the verification and acceptance testing of data builds and real time Mission Control Room configuration and operations. Key Responsibilities may include, but are not limited to: Responsible for the development of Flight Test Instrumentation process, procedures and modifications of engineering drawings related to Instrumentation systems for ground and flight test activities. Define Instrumentation system configurations and signal conditioning requirements common to Airborne Data Acquisition Hardware and Software such as: sensor selection, installation methods, calibration and checkout requirements. Perform a variety of duties, including: engineering design tasks as assigned, participating in electrical design reviews, and procedure writing. Design and Maintain TTC Airborne Data Acquisition Systems, Telemetry ground station equipment to include auto tracking antennas, RF receivers, bit-syncs, de-commutators, demultiplexers, communication system matrix, chapter 10 recorders, and camera systems. Flight Data processing and data reduction. Instrumentation Data System design, from requirements to operations. We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications Must have a Bachelor of Science degree in a Science, Technology, Engineering, or Math (STEM) discipline AND 12 years of related professional/military experience OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience Your ability to transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Must have professional experience with one or more of the following: telemetry, RF, onboard recording systems, ground stations, or sub-systems Must have professional experience with specialized Instrumentation test equipment/sensors. (e.g. Strain Gages, Accelerometers, Pressure Transducers) Preferred Qualifications: Ability to create detailed design specifications, product manuals, ICDs, and/or design handbooks. Design and operational experience with TTC data systems. Experience working in Flight Test or Lab Test environments Familiarity with fundamental principles of Symvionics IADS software or working in a Mission Control Room Basic knowledge of data bus architecture MIL-STD-1553, IEE-1394, ARINC-429, RS232 an RS422. Experience post-test processing data from an IRIG-106 CH10 recording Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
05/28/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems sector is seeking a highly motivated Staff Test Engineer Instrumentation to join our team of qualified, diverse individuals within our Test & Evaluation organization. This role is located in Melbourne, FL. Note: Due to the classified nature of the work being performed, this position does not offer any virtual or telecommute working options. This is an individual contributor role with no direct reports. As a Staff Test Engineer Instrumentation Engineer you'll contribute to the design, development, integration, configuration and testing of lab and flight test Data Acquisition Systems. In this role you will be responsible for the verification and acceptance testing of data builds and real time Mission Control Room configuration and operations. Key Responsibilities may include, but are not limited to: Responsible for the development of Flight Test Instrumentation process, procedures and modifications of engineering drawings related to Instrumentation systems for ground and flight test activities. Define Instrumentation system configurations and signal conditioning requirements common to Airborne Data Acquisition Hardware and Software such as: sensor selection, installation methods, calibration and checkout requirements. Perform a variety of duties, including: engineering design tasks as assigned, participating in electrical design reviews, and procedure writing. Design and Maintain TTC Airborne Data Acquisition Systems, Telemetry ground station equipment to include auto tracking antennas, RF receivers, bit-syncs, de-commutators, demultiplexers, communication system matrix, chapter 10 recorders, and camera systems. Flight Data processing and data reduction. Instrumentation Data System design, from requirements to operations. We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications Must have a Bachelor of Science degree in a Science, Technology, Engineering, or Math (STEM) discipline AND 12 years of related professional/military experience OR a Master of Science degree in a STEM discipline AND 10 years of related professional/military experience, OR a STEM Ph.D. AND 8 years of related professional/military experience Your ability to transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company. Must have professional experience with one or more of the following: telemetry, RF, onboard recording systems, ground stations, or sub-systems Must have professional experience with specialized Instrumentation test equipment/sensors. (e.g. Strain Gages, Accelerometers, Pressure Transducers) Preferred Qualifications: Ability to create detailed design specifications, product manuals, ICDs, and/or design handbooks. Design and operational experience with TTC data systems. Experience working in Flight Test or Lab Test environments Familiarity with fundamental principles of Symvionics IADS software or working in a Mission Control Room Basic knowledge of data bus architecture MIL-STD-1553, IEE-1394, ARINC-429, RS232 an RS422. Experience post-test processing data from an IRIG-106 CH10 recording Primary Level Salary Range: $152,900.00 - $229,300.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. xibtplm For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
L3Harris is seeking a Systems Engineer who will be responsible for working in the COMINT SYSTEMS team. This team is a dynamic, diverse team who supports geolocation and signals capabilities across multiple platforms, programs, and sensors. This team supports all phases of program systems engineering, from concept and proposal through flight test, verification, and delivery. The Systems Engineer will be responsible for working with the other systems engineers and software engineers. Typical duties will involve requirements verification, supporting software development, integration testing of across multiple programs, and documentation of such items. Essential Functions: Requirements derivation for new capability added to legacy programs. Plan and conduct integration testing of new functionality while ensuring legacy functionality continues to work as intended. Capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Interface with Systems Engineering, Software Development, and Flight Line Test implement, and test new baseline functionality. Work with management to clarify to schedule and budget required to accomplish assigned work. Prepare and present test/integration reports for program meetings. Develop, track and present technical metrics. Manage work packages using collaborative tools through all phases of the project. Ability to thrive in an environment where tasking from multiple simultaneous efforts is required. Geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience Familiarity with Linux operating systems including comfort with Command Line Linux. Misc related duties as assigned by supervisor. Occasional off-shift work (evenings, weekends) may be required to support aircraft flight test schedules. Ability to pass an FAA Class 3 Flight Physical and altitude chamber with willingness to support test flights. Up to 10% travel could be required CONUS/OCONUS. Ability to obtain DoW Secret or higher clearance with no barriers to obtaining TS/SI as needed. Required Qualifications: Bachelor's Degree and minimum 4 years of systems engineering experience. Graduate Degree and a minimum of 2 years of systems engineering experience. In lieu of a degree, minimum of 8 years of systems engineering (or similar) experience. Demonstrated understanding of System Engineering fundamentals and processes. Demonstrated experience evaluating and verifying requirements across multiple software release cycles in simultaneous development. Demonstrated experience planning and conducting integration testing of new functionality. Demonstrated capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Demonstrated geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience. Demonstrated familiarity with Linux operating systems including comfort with Command Line Linux. Preferred Skills: Technical leadership experience. Cybersecurity Certification such as Sec, CASP, CySA or CISSP. Prior military SIGINT or RF maintenance experience. RF performance analysis (e.g. antenna gain, array design, RF cascade analysis). Direction Finding algorithm experience. Signals analysis experience. Digital Signal Processing experience. Software development experience. Familiarity with containers. Familiarity with virtual machines, VMware vSphere. Proficiency with Linux and Bash scripting. Active DoW TS/SI clearance. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is seeking a Systems Engineer who will be responsible for working in the COMINT SYSTEMS team. This team is a dynamic, diverse team who supports geolocation and signals capabilities across multiple platforms, programs, and sensors. This team supports all phases of program systems engineering, from concept and proposal through flight test, verification, and delivery. The Systems Engineer will be responsible for working with the other systems engineers and software engineers. Typical duties will involve requirements verification, supporting software development, integration testing of across multiple programs, and documentation of such items. Essential Functions: Requirements derivation for new capability added to legacy programs. Plan and conduct integration testing of new functionality while ensuring legacy functionality continues to work as intended. Capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Interface with Systems Engineering, Software Development, and Flight Line Test implement, and test new baseline functionality. Work with management to clarify to schedule and budget required to accomplish assigned work. Prepare and present test/integration reports for program meetings. Develop, track and present technical metrics. Manage work packages using collaborative tools through all phases of the project. Ability to thrive in an environment where tasking from multiple simultaneous efforts is required. Geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience Familiarity with Linux operating systems including comfort with Command Line Linux. Misc related duties as assigned by supervisor. Occasional off-shift work (evenings, weekends) may be required to support aircraft flight test schedules. Ability to pass an FAA Class 3 Flight Physical and altitude chamber with willingness to support test flights. Up to 10% travel could be required CONUS/OCONUS. Ability to obtain DoW Secret or higher clearance with no barriers to obtaining TS/SI as needed. Required Qualifications: Bachelor's Degree and minimum 4 years of systems engineering experience. Graduate Degree and a minimum of 2 years of systems engineering experience. In lieu of a degree, minimum of 8 years of systems engineering (or similar) experience. Demonstrated understanding of System Engineering fundamentals and processes. Demonstrated experience evaluating and verifying requirements across multiple software release cycles in simultaneous development. Demonstrated experience planning and conducting integration testing of new functionality. Demonstrated capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Demonstrated geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience. Demonstrated familiarity with Linux operating systems including comfort with Command Line Linux. Preferred Skills: Technical leadership experience. Cybersecurity Certification such as Sec, CASP, CySA or CISSP. Prior military SIGINT or RF maintenance experience. RF performance analysis (e.g. antenna gain, array design, RF cascade analysis). Direction Finding algorithm experience. Signals analysis experience. Digital Signal Processing experience. Software development experience. Familiarity with containers. Familiarity with virtual machines, VMware vSphere. Proficiency with Linux and Bash scripting. Active DoW TS/SI clearance. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3Harris is seeking a Systems Engineer who will be responsible for working in the COMINT SYSTEMS team. This team is a dynamic, diverse team who supports geolocation and signals capabilities across multiple platforms, programs, and sensors. This team supports all phases of program systems engineering, from concept and proposal through flight test, verification, and delivery. The Systems Engineer will be responsible for working with the other systems engineers and software engineers. Typical duties will involve requirements verification, supporting software development, integration testing of across multiple programs, and documentation of such items. Essential Functions: Requirements derivation for new capability added to legacy programs. Plan and conduct integration testing of new functionality while ensuring legacy functionality continues to work as intended. Capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Interface with Systems Engineering, Software Development, and Flight Line Test implement, and test new baseline functionality. Work with management to clarify to schedule and budget required to accomplish assigned work. Prepare and present test/integration reports for program meetings. Develop, track and present technical metrics. Manage work packages using collaborative tools through all phases of the project. Ability to thrive in an environment where tasking from multiple simultaneous efforts is required. Geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience Familiarity with Linux operating systems including comfort with Command Line Linux. Misc related duties as assigned by supervisor. Occasional off-shift work (evenings, weekends) may be required to support aircraft flight test schedules. Ability to pass an FAA Class 3 Flight Physical and altitude chamber with willingness to support test flights. Up to 10% travel could be required CONUS/OCONUS. Ability to obtain DoW Secret or higher clearance with no barriers to obtaining TS/SI as needed. Required Qualifications: Bachelor's Degree and minimum 4 years of systems engineering experience. Graduate Degree and a minimum of 2 years of systems engineering experience. In lieu of a degree, minimum of 8 years of systems engineering (or similar) experience. Demonstrated understanding of System Engineering fundamentals and processes. Demonstrated experience evaluating and verifying requirements across multiple software release cycles in simultaneous development. Demonstrated experience planning and conducting integration testing of new functionality. Demonstrated capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Demonstrated geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience. Demonstrated familiarity with Linux operating systems including comfort with Command Line Linux. Preferred Skills: Technical leadership experience. Cybersecurity Certification such as Sec, CASP, CySA or CISSP. Prior military SIGINT or RF maintenance experience. RF performance analysis (e.g. antenna gain, array design, RF cascade analysis). Direction Finding algorithm experience. Signals analysis experience. Digital Signal Processing experience. Software development experience. Familiarity with containers. Familiarity with virtual machines, VMware vSphere. Proficiency with Linux and Bash scripting. Active DoW TS/SI clearance. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is seeking a Systems Engineer who will be responsible for working in the COMINT SYSTEMS team. This team is a dynamic, diverse team who supports geolocation and signals capabilities across multiple platforms, programs, and sensors. This team supports all phases of program systems engineering, from concept and proposal through flight test, verification, and delivery. The Systems Engineer will be responsible for working with the other systems engineers and software engineers. Typical duties will involve requirements verification, supporting software development, integration testing of across multiple programs, and documentation of such items. Essential Functions: Requirements derivation for new capability added to legacy programs. Plan and conduct integration testing of new functionality while ensuring legacy functionality continues to work as intended. Capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Interface with Systems Engineering, Software Development, and Flight Line Test implement, and test new baseline functionality. Work with management to clarify to schedule and budget required to accomplish assigned work. Prepare and present test/integration reports for program meetings. Develop, track and present technical metrics. Manage work packages using collaborative tools through all phases of the project. Ability to thrive in an environment where tasking from multiple simultaneous efforts is required. Geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience Familiarity with Linux operating systems including comfort with Command Line Linux. Misc related duties as assigned by supervisor. Occasional off-shift work (evenings, weekends) may be required to support aircraft flight test schedules. Ability to pass an FAA Class 3 Flight Physical and altitude chamber with willingness to support test flights. Up to 10% travel could be required CONUS/OCONUS. Ability to obtain DoW Secret or higher clearance with no barriers to obtaining TS/SI as needed. Required Qualifications: Bachelor's Degree and minimum 4 years of systems engineering experience. Graduate Degree and a minimum of 2 years of systems engineering experience. In lieu of a degree, minimum of 8 years of systems engineering (or similar) experience. Demonstrated understanding of System Engineering fundamentals and processes. Demonstrated experience evaluating and verifying requirements across multiple software release cycles in simultaneous development. Demonstrated experience planning and conducting integration testing of new functionality. Demonstrated capability documentation - including CONOP, Use Cases, Sequence Diagrams, Requirements Specifications, Test Plans, Test Cards, User Manuals, and other technical documentation. Demonstrated geolocation experience (Direction Finding or Collaborative Geo, e.g. NCCT, TNG), RF Hardware, or Signals Analysis experience. Demonstrated familiarity with Linux operating systems including comfort with Command Line Linux. Preferred Skills: Technical leadership experience. Cybersecurity Certification such as Sec, CASP, CySA or CISSP. Prior military SIGINT or RF maintenance experience. RF performance analysis (e.g. antenna gain, array design, RF cascade analysis). Direction Finding algorithm experience. Signals analysis experience. Digital Signal Processing experience. Software development experience. Familiarity with containers. Familiarity with virtual machines, VMware vSphere. Proficiency with Linux and Bash scripting. Active DoW TS/SI clearance. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title : Senior Specialist, Test/Integration Engineer Job Code : 34466 Job Location: Greenville, TX Schedule: 9/80 Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and technical specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Successful candidate shall possess 6-8 years of experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platforms. Requires strong knowledge of job area. Typically viewed as having a specialty within discipline. May have broad knowledge of project management. Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidate must currently hold and maintain a U.S. DOD Top Secret Security clearance with SCI is required. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title : Senior Specialist, Test/Integration Engineer Job Code : 34466 Job Location: Greenville, TX Schedule: 9/80 Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and technical specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Successful candidate shall possess 6-8 years of experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platforms. Requires strong knowledge of job area. Typically viewed as having a specialty within discipline. May have broad knowledge of project management. Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidate must currently hold and maintain a U.S. DOD Top Secret Security clearance with SCI is required. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title : Senior Specialist, Test/Integration Engineer Job Code : 34466 Job Location: Greenville, TX Schedule: 9/80 Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and technical specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Successful candidate shall possess 6-8 years of experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platforms. Requires strong knowledge of job area. Typically viewed as having a specialty within discipline. May have broad knowledge of project management. Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidate must currently hold and maintain a U.S. DOD Top Secret Security clearance with SCI is required. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title : Senior Specialist, Test/Integration Engineer Job Code : 34466 Job Location: Greenville, TX Schedule: 9/80 Essential Functions: Subsystem pre-operational checks in accordance with applicable engineering documentation Configures/prepares LRUs and subsystem components for single and multi-thread interface and operation Accomplishment of subsystem and system level Ground Test Plans Insertion loss testing of RF harness assemblies per released engineering and technical specifications System and subsystem troubleshooting to component level Identifies subsystem LRU failures and takes appropriate troubleshooting actions to repair, replace, and retest when necessary Identifies hardware, software, and firmware anomalies and recommends repair/corrective actions via several enterprise software applications Supports EMI/Tempest testing of various airborne subsystems Supports software and hardware development integration activities Aircraft pre-flight activities to ensure system and subsystem flight readiness Uses several types of test equipment to perform various subsystem and system level troubleshooting and test functions: Local Area Network (LAN) Test Devices Network Analyzer Time Domain Reflectometer (TDR) Digital Multimeter Oscilloscope Frequency Counter Function Generator/AWGs Signal Generator Spectrum Analyzer Power/Watt Meter Fiber Optic Test Devices Employs several COTS and organic software applications to complete test activities May be required to perform in-flight duty as observer on several airborne platforms May be responsible for the preparation and/or review of engineering documents Advises and assists in effecting design changes to improve operational capability, equipment efficiency, and reduce cost of operation Frequent technical interface with various functional organizations, as well as local and offsite customers Qualifications: Successful candidate shall possess 6-8 years of experience maintaining SIGINT/COMINT mission/communications systems aboard U.S. military airborne and/or ground based platforms. Requires strong knowledge of job area. Typically viewed as having a specialty within discipline. May have broad knowledge of project management. Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Must be familiar with the use of industry standard test equipment and COTS hardware. Candidate must be computer literate to include the use of Windows based programs and COTS software applications. Candidate must currently hold and maintain a U.S. DOD Top Secret Security clearance with SCI is required. Candidates shall possess thorough analytical and troubleshooting skills and be able to communicate well via verbal or written means. Position will require flexibility with regard to assigned work schedules/shifts and will require maintenance of qualification for FAA Class III flight physical/duties in support of organizational objectives. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
05/28/2026
Full time
We are seeking an experienced Data Links Chief Architect to join our team and support the Information Dominance Group Chief Engineer as a Subject Matter Expert for Data Links and Communications on all division platforms. Essential Functions: Act as L3Harris' primary interface to the USAF customer for Data Links and Communications technical implementation and issues. Support the Platform Chief Engineers for RC-135 Aircraft and Ground Systems in assessing and identifying engineering needs and technical issues with platform design and implementation. Lead the External Communications Integrated Product Team to identify and resolve issues of program implementation. Provide recommendations to the USAF customer on contract content, priorities, technical resolutions, and implementation strategies. Lead technical support investigations for field-reported issues regarding Comms and Data Links. Maintain the Data Link and Communication strategic roadmap for technology introduction into the RC-135 platforms. Oversee the review of quarterly CCBD'd ICPs to Mil Stds 6016, 6018, 6020, 6022, 6090 for required changes to system implementation. Assess system impacts for implementation and criticality and propose implementations to the USAF customer. Oversee maintenance of aircraft-specific data files for data link operation based on flight line measurements and ensure deployment of updates for optimized system operation. Provide technical leadership for development efforts of the TADIL Certification Facility (TCF), including determining test event scheduling, setting hardware and application priorities, and executing the Test Architecture Roadmap. Act as the primary interface to ACC A589/A5JI and JITC for the 645th AESS and RC135 program for Link Certification planning. Develop POAMs and MOUs as necessary for test planning and lead preparation for and execution of test events. Manage vendor technical requirements and deliveries of third-party products, including SAIC (JRE), Curtiss-Wright/TCG (BOSS), General Dynamics (TACDS), and Northrop Grumman (LMS). Ability to travel approximately 15%, depending on business needs. Secret Clearance, with ability to obtain a Top Secret with SCI. Qualifications: Active Secret Clearance required, Top Secret with SCI preferred. Bachelor's Degree in physics, engineering or related fields and a minimum of 12 years of prior experience in Development Programs for Data Links interfaces for military Command and Control (C2) systems, including DT and OT events. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. Demonstrated experience as lead implementer in bringing a system through Link 16 Data Link Service Level Conformance and Joint Interoperability Certification Testing events, including adjudication of findings. Demonstrated understanding of Link 16 C2 and EW Mission Functions. Demonstrated ability to lead teams to contract technical definitization in excess of $10M and engage in technical negotiation with military customers for contract award. Demonstrated experience in System and Subsystem design of C2 Systems, including participation in customer adjudication of requirements and managing scope within contract proposed limits. Demonstrated experience in leading Systems, Software, Aeronautical, and RF engineering teams through all phases (requirements, development, and integration) of contract development and delivery. Demonstrated experience in introducing new communications technologies into systems, including conducting risk assessment and mitigation, and developing executable plans for implementation. Demonstrated experience in military aircraft integration and test of communications and data link systems, including component, ground, flight, and acceptance testing. Preferred Additional Skills: Experience with Integrated Broadcast System (IBS) implementation and architecture. Experience with Cooperative Electronic Support Measures Operations (CESMO) architecture. Experience with ARC-210 Radios and SATURN, IW, and MUOS waveforms. Experience with Tactical Targeting Networking Technologies (TTNT) implementation and operation. LI-AM2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .5c143e31-5e48-4549-b2d185386
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Software Engineer - RPG Job Code: 37095 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: We are seeking a mid-level Software Engineer to join our Rapid Prototyping Group (RPG) and help turn innovative ideas into working capabilities at speed. In this role, you will design, build, test, and refine quick-turn software prototypes that support proof-of-concept efforts, emerging technology evaluations, customer demonstrations, and early product development. You'll work alongside a collaborative & multi-disciplinary team of engineers to solve complex problems, adapt to evolving requirements, and deliver impactful solutions in a fast-paced environment. The ideal candidate is a hands-on, versatile developer who thrives in ambiguity, enjoys experimenting with new technologies, and is motivated by seeing ideas move rapidly from concept to capability. If you're excited to innovate, build, and make a visible impact on the future of our products and solutions, we encourage you to apply. Essential Functions: Rapidly translate emerging concepts, customer needs, and experimental objectives into functional software prototypes and demonstration capabilities for advanced military communications systems. Design, develop, integrate, test, and debug software for embedded and Linux-based prototype systems using C++ and C in real-time, multi-threaded, and multi-core environments. Contribute to the design, implementation, integration, test, and technical demonstrations of complex software and system-level capabilities in a rapid prototyping environment. Use emulators, debuggers, and related development tools to troubleshoot software behavior, isolate root causes, and resolve integration issues across software and hardware interfaces. Collaborate with software, hardware, RF, mechanical, field testing, and systems engineering teams to evaluate interfaces, operational requirements, and technical constraints and mature concepts into working capabilities. Communicate technical progress, issues, risks, and tradeoffs clearly to team members, leadership, and end users while operating with general supervision and exercising sound engineering judgment in a fast-paced development environment. Qualifications: 2+ years of embedded SW engineering experience. Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Broad technical knowledge across adjacent disciplines, including hardware architectures, digital design concepts, electrical interfaces, and system integration for embedded and communications prototypes. Working knowledge of rapid prototyping processes, including iterative development, risk reduction, fast-turn integration, and engineering tradeoffs between speed, performance, and technical rigor. Experience applying AI/ML tools and techniques across the development lifecycle, including prototype capability enhancement, and model development and training. Familiarity with L3Harris radio products, tactical communications systems, and related waveforms, interfaces, and operational applications. Working knowledge of networking concepts, protocols, and troubleshooting, including familiarity with 5G technologies, device configuration, and integration in communications environments. Other relevant experience may include - Python, VHDL, Rust, Linux kernel, microcontrollers, and low-level communication interfaces. Requires proficient knowledge of job area. Ability to obtain a US Security Clearance In compliance with pay transparency requirements, the salary range for this role in New York is $84,500 to $157,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
05/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Software Engineer - RPG Job Code: 37095 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: We are seeking a mid-level Software Engineer to join our Rapid Prototyping Group (RPG) and help turn innovative ideas into working capabilities at speed. In this role, you will design, build, test, and refine quick-turn software prototypes that support proof-of-concept efforts, emerging technology evaluations, customer demonstrations, and early product development. You'll work alongside a collaborative & multi-disciplinary team of engineers to solve complex problems, adapt to evolving requirements, and deliver impactful solutions in a fast-paced environment. The ideal candidate is a hands-on, versatile developer who thrives in ambiguity, enjoys experimenting with new technologies, and is motivated by seeing ideas move rapidly from concept to capability. If you're excited to innovate, build, and make a visible impact on the future of our products and solutions, we encourage you to apply. Essential Functions: Rapidly translate emerging concepts, customer needs, and experimental objectives into functional software prototypes and demonstration capabilities for advanced military communications systems. Design, develop, integrate, test, and debug software for embedded and Linux-based prototype systems using C++ and C in real-time, multi-threaded, and multi-core environments. Contribute to the design, implementation, integration, test, and technical demonstrations of complex software and system-level capabilities in a rapid prototyping environment. Use emulators, debuggers, and related development tools to troubleshoot software behavior, isolate root causes, and resolve integration issues across software and hardware interfaces. Collaborate with software, hardware, RF, mechanical, field testing, and systems engineering teams to evaluate interfaces, operational requirements, and technical constraints and mature concepts into working capabilities. Communicate technical progress, issues, risks, and tradeoffs clearly to team members, leadership, and end users while operating with general supervision and exercising sound engineering judgment in a fast-paced development environment. Qualifications: 2+ years of embedded SW engineering experience. Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Broad technical knowledge across adjacent disciplines, including hardware architectures, digital design concepts, electrical interfaces, and system integration for embedded and communications prototypes. Working knowledge of rapid prototyping processes, including iterative development, risk reduction, fast-turn integration, and engineering tradeoffs between speed, performance, and technical rigor. Experience applying AI/ML tools and techniques across the development lifecycle, including prototype capability enhancement, and model development and training. Familiarity with L3Harris radio products, tactical communications systems, and related waveforms, interfaces, and operational applications. Working knowledge of networking concepts, protocols, and troubleshooting, including familiarity with 5G technologies, device configuration, and integration in communications environments. Other relevant experience may include - Python, VHDL, Rust, Linux kernel, microcontrollers, and low-level communication interfaces. Requires proficient knowledge of job area. Ability to obtain a US Security Clearance In compliance with pay transparency requirements, the salary range for this role in New York is $84,500 to $157,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Date Posted: 2026-05-19 Country: United States of America Location: US-CO-AURORA-S E Hughes Dr BLDG S77 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: TS/SCI without Polygraph Security Clearance Status: Active and existing security clearance required on day 1 At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's Air & Space Defense Systems (ASDS) strategic business unit (SBU) specializes in multi-domain integrated air and missile defense, advanced sensors, space-based systems, hyper sonics, effectors and cyber solutions. Focused on program execution, business growth and the highest level of customer satisfaction, the ASDS team provides customers with unmatched capabilities of detection and sensing, command and control, and air-to-air, air-to-surface, and surface-to-air munitions to accomplish air, space and missile defense missions. Within ASDS, Space Intelligence, Surveillance & Reconnaissance is our Sub-SBU that delivers information superiority from space, multi-mission automation and orchestration, multiple intelligence (Multi-INT) and resilient operations, secure processing, and data management. This position is located onsite in Aurora, CO. What You Will Do Design, develop, test, deliver, and maintain software for cutting-edge satellite ground systems Work with talented teams of engineers, architects, and leaders in an Agile environment What You Will Learn A breadth of advanced software technologies and techniques including multi-tiered architectures, AWS web services, and microservice software design Modern DevSecOps and Continuous Integration/Continuous Delivery techniques. Software lifecycle practices for large-scale defense projects Satellite ground system technologies including command & telemetry, flight dynamics, planning and scheduling, and spacecraft operations Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 5 years of relevant software engineering experience Experience using Java and C++ Experience with Agile development Active and transferable U.S. government issued TS/SCI security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer Experience with object-oriented analysis and design Experience working within LINUX/UNIX operating systems Experience with one or more areas of satellite ground system software such as mission management, planning and scheduling, command and telemetry, satellite operations, or flight dynamics models. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible - Relocation assistance is available. Learn More & Apply Now Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Aurora, CO: Raytheon Aurora, CO Location We Are RTX As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
05/28/2026
Full time
Date Posted: 2026-05-19 Country: United States of America Location: US-CO-AURORA-S E Hughes Dr BLDG S77 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: TS/SCI without Polygraph Security Clearance Status: Active and existing security clearance required on day 1 At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon's Air & Space Defense Systems (ASDS) strategic business unit (SBU) specializes in multi-domain integrated air and missile defense, advanced sensors, space-based systems, hyper sonics, effectors and cyber solutions. Focused on program execution, business growth and the highest level of customer satisfaction, the ASDS team provides customers with unmatched capabilities of detection and sensing, command and control, and air-to-air, air-to-surface, and surface-to-air munitions to accomplish air, space and missile defense missions. Within ASDS, Space Intelligence, Surveillance & Reconnaissance is our Sub-SBU that delivers information superiority from space, multi-mission automation and orchestration, multiple intelligence (Multi-INT) and resilient operations, secure processing, and data management. This position is located onsite in Aurora, CO. What You Will Do Design, develop, test, deliver, and maintain software for cutting-edge satellite ground systems Work with talented teams of engineers, architects, and leaders in an Agile environment What You Will Learn A breadth of advanced software technologies and techniques including multi-tiered architectures, AWS web services, and microservice software design Modern DevSecOps and Continuous Integration/Continuous Delivery techniques. Software lifecycle practices for large-scale defense projects Satellite ground system technologies including command & telemetry, flight dynamics, planning and scheduling, and spacecraft operations Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 5 years of relevant software engineering experience Experience using Java and C++ Experience with Agile development Active and transferable U.S. government issued TS/SCI security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer Experience with object-oriented analysis and design Experience working within LINUX/UNIX operating systems Experience with one or more areas of satellite ground system software such as mission management, planning and scheduling, command and telemetry, satellite operations, or flight dynamics models. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible - Relocation assistance is available. Learn More & Apply Now Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Aurora, CO: Raytheon Aurora, CO Location We Are RTX As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
