4 jobs found

At a Glance Company: Howmet Aerospace Location: New Brighton, MN (On-site) Job Type: Full-Time Pay Range: $37 - $48/hr (based on experience) Shift: Day Shift (standard hours) Overtime: As needed Experience Level: Mid to Senior (2-6+ years or equivalent experience) Work Authorization: U.S. Person required (ITAR environment, no visa sponsorship) Why This Role Exists This role exists to support ongoing aerospace production programs requiring advanced multi-axis machining and process optimization. At Howmet Aerospace, this position plays a key role in developing and maintaining CNC programs used to manufacture precision aerospace components-where accuracy, repeatability, and process control are critical. The Work You'll Be Doing In this role, you will: Create and verify CNC programs for 3-5 axis machining centers using 3D models and blueprints Develop and support touch probe programs for in-process inspection and verification Build and maintain machining process documentation, including tool lists and setup instructions Collaborate with machinists, engineering, and quality teams to ensure efficient production Support fixture design and cutting tool development Simulate and optimize programs to improve cycle times and reduce scrap Participate in cost reduction and continuous improvement initiatives Document programming standards, best practices, and procedures Maintain a clean, safe, and organized work environment (5S/6S) Machines, Controls & Software You'll work with equipment and systems such as: Machines: 3-, 4-, and 5-axis CNC machining centers Controls: Siemens, Fanuc CAM Software: Siemens NX, GibbsCAM Simulation Software: Vericut Inspection Tools: CMM, standard precision measuring tools Materials You'll Work With Aluminum Aerospace alloys Titanium What We're Looking For Required: High school diploma or GED Trade certificate with 2+ years' experience OR 6+ years of relevant experience Experience with CNC milling, turning, or grinding Strong understanding of machining complex prismatic components Ability to read and interpret engineering drawings and specifications Experience with setups, tooling, and machining processes Comfortable using measuring tools and performing process validation Basic proficiency with Windows and Microsoft Office Strong communication, teamwork, and problem-solving skills Preferred (Not Required): Experience with Siemens NX or GibbsCAM Experience with Vericut or similar simulation tools High-speed 5-axis machining experience (especially aluminum) Fixture design and cutting tool development experience Experience with touch probe programming Understanding of postprocessors across multiple machine platforms Aerospace or precision manufacturing experience Why Machinists Like Working Here Programmers and machinists choose Howmet Aerospace because: Work supports real aerospace and defense applications Clean, structured, process-driven manufacturing environment Advanced multi-axis machining and modern programming tools Competitive pay for skilled CNC programmers Strong collaboration between programming, engineering, and shop floor Long-term stability with a global aerospace leader Pay, Benefits & Schedule Pay Range: $37 - $48/hr (DOE) Benefits: Medical, dental, vision (Day 1) 401(k) with 4.2% match + 3% company contribution (7.2% total) 5% target performance bonus PTO + 10 paid holidays Paid parental leave (up to 3 weeks at 100%) Life insurance & Employee Assistance Program Schedule: Day shift (standard hours) Overtime: As needed Apply Interested CNC programmers can apply directly through hireCNC. Apply now or save this job to come back later.

CNC Mills Programmer CNC Mill Programmer Mason welcomes people who share our determination and high standards to join us in doing work that moves the world forward. We design, manufacture, and market highly engineered products and systems principally for the aerospace and defense markets. Mason, a wholly-owned subsidiary of Transdigm, offers world-class control devices and subsystems - such as control grips , throttles , HaWC controllers , and communications interfaces - for today's advanced cockpits, military vehicles, and other specialized applications. Our solutions fall into two broad categories: control products and components. Title: CNC Programmar Job Family: Production Reports to: Manufacturing Manager FLSA Status Non exempt EEOC Class: Craft Worker Summary The experienced CNC Mill Programmer will have advance programming knowledge for CNC Mills (4 & 5 axis) machines using Mastercam. The programmer will also have advance knowledge of machining tools including cutters and inserts. He / She must have ability to utilize setup reduction techniques and optimal machining / personal usage. The programmer will need a strong verbal and written communication skills is required for this position. Position Duties Essential functions of the position include, but are not limited to: Create CNC programs utilizing the latest MasterCam software. Tests, modifies and enhances set up procedures. Maintains and preserves NC code and CAM libraries. Develops, prepares, optimizes, and maintains Set-up and operation documents. Records and maintains the established processes to ensure only authorized and documented changes are made. Studies blueprints, sketches, drawings, specifications or sample part to determine dimensions and tolerances of finished work piece, sequence of operations and set up requirements. Design and select work holding fixtures, cutting tools, attachments, accessories, and material size needed when creating program. Use of Renishaw probing cycles in CNC program. Supports prove out process with Machinist and inspection to meet conformance. Continuous improvement to new and existing processes. Able to design fixtures if needed Completes task on time Have vision to drive DFM and part/tooling standardization Understands and live by company's ethics and business conduct policies Other duties as assigned Qualifications Education & Experience: CNC multi axis (5 axis) Mill programming using MasterCam software: 7 years (Required) Solid Modeling: 3 years (Required) Use of SolidWorks and Cimco editor is a plus Able to trouble shoot programming errors and make CNC's run more efficiently Knowledge of Horizontal and Vertical Mills Multi axis machines Strong problem-solving skills Attention to detail Ability to read blueprints and advance GD&T knowledge Good machining practice and knowledge of speeds and feeds. Cutting technique for stainless steel, aluminum, and other materials required Experience with working with castings is a plus Must have knowledge of CNC G-codes and M-codes. Knowledge of Renishaw probing use Knowledge of HAAS and Fanuc control General computer skills, including Microsoft office Strong Shop Math; analytic geometry, algebra and trigonometry High school diploma or GED Physical Demands While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate machinery Reaches, bends, twists Regularly lift 30-50 pounds Regularly perform repetitive tasks Regularly possess manual dexterity to put parts or pieces together quickly and accurately Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Pay Range: $40.00- $65.00 hourly. Other This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). This position requires either U.S persons (as defined in applicable export regulations) or a non 1 U.S person who is eligible to obtain required export authorization(s). Mason is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability Compensation details: 40-65 PI3e5da008bb74-9762

Job Summary: The CNC/CAM Programmer is an important member of our programming and engineering team, supporting the production of precision aerospace components. This role acts as a liaison of excellence between the Engineering and Manufacturing (Operations) teams. You will focus on process development and CNC programming for multi-axis lathes and vertical machining centers. Time will be split between programming in a CAM (Computer-Aided Manufacturing) environment and, as required, performing hands-on setup for first-run production. Major Areas of Responsibility: • Utilize ESPRIT CAM software to develop CNC programs (G-code) that optimize manufacturing methods for producing precision and ultra-precision components. • Collaborate with Engineering and Manufacturing teams to develop manufacturing processes, preferred tooling and work-holding, in-process deburring, and metrology that become approved production work instructions. Document all selections in ESPRIT tooling and datasheet libraries. • Leverage parametric programming, macros, and CAM software to optimize programs across families of parts. • Set up and operate production equipment during initial process development for new parts. • Determine optimal setups, toolpaths, material removal rates, surface finishes, and yields. • Train production personnel to ensure smooth transition and reproducibility in mass production. • Manage CNC programs and machine/tool setup data within the company's Product Data Management (PDM) and Distributed Numerical Control (DNC) systems. • Serve as an in-house subject matter expert and participate in lean initiatives to optimize released products, reduce setup and machine time, and improve productivity and quality. • Stay current with manufacturing technologies through research of equipment, software, tooling, and gaging systems. • Make recommendations for productivity improvements related to technology investments. • Perform miscellaneous duties as assigned. Requirements: • Bachelor's degree in Engineering preferred. • Progressive on-the-job experience commensurate with a degree will be considered. • Five or more years of advanced manufacturing experience, preferably in precision or ultra-precision machining environments. • Expert knowledge of Fanuc controls. • CNC programming experience using advanced techniques, including on-machine probing and tool setters, preferred. • Strong knowledge of work-holding, tooling systems, and CNC machine setup. • Proven working experience with CAM software for CNC programming. ESPRIT is preferred; experience with Mastercam, PartMaker, SolidCAM, or similar systems is acceptable. ESPRIT training will be provided. • Familiarity with manufacturing enterprise software; experience with Epicor ERP or similar systems is a plus. Physical Demands: Legend N (Not applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0-2.5 hours/day) F (Frequently) Position requires this activity up to 66% of the time (2.5-5.5 hours/day) C (Constantly) Position requires this activity more than 66% of the time (5.5+ hours/day) Lift/Carry 10-50lbs F Stand F Walk F Manually manipulate F Squat or kneel F Bend F Reach above shoulder F PIe8d604ce5-

We are looking for a CNC Programmer who will actively program and maintain CNC machines. Essential Duties and Responsibilities CNC Programming Duties Develops complete process theories for part creation to include order of operations, work holding, required tooling, and feeds and speeds. Converts CAD drawings, blueprints, and solid models in to CNC programs. Customizes CNC programs to maximize production efficiency. Ensures part quality by employing GD&T guidelines during development. Reviews CNC programs to ensure efficient operation and for process improvement opportunities. Proactively identifies opportunities for improving production processes and reducing non-conforming product. Maximizes efficiency and quality through selection of cutting tools, machine speeds and feeds, accuracy of cutter path, and fixture design. Process Engineering Duties Analyzes Customer designs for manufacturability and applies estimated costs for the necessary manufacturing processes. Develops detailed work instructions and other necessary job aids to ensure effective CNC set-up and operation through the entire production process. Analyzes and evaluates production issues to quickly and effectively create and implement adequate solutions. Investigates, evaluates, and implements opportunities and systems to reduce machine shop labor and material costs. Performs other tasks as assigned. Job Requirements High school diploma or GED Minimum 2 years Machining experience in a production environment CNC Programming experience using CAM software; GibbsCam experience preferred 3D Solid modeling experience; SolidWorks experience preferred Proficient reading and understanding blue prints, models and specifications Comprehensive understanding of manufacturing processes, quality standards and GD&T Excellent mechanical aptitude and experience working with/on machines and equipment Proficient in Microsoft Office Excellent problem solving skills Advanced math skills Strong written and verbal communication skills About our Company Amphenol Borisch Technologies (ABT), a division of Amphenol Corporation, is an industry leader in providing high-reliability electronic systems for Aerospace and Defense companies across the globe. ABT is focused on expanding the company's industry presence by providing customers with superior quality and service combined with advanced manufacturing capabilities. ABT is headquartered in Grand Rapids, MI and has locations in Nogales, Mexico, Mesa, AZ and London, Ontario. Benefits We Offer: At Amphenol Borisch Technologies, we provide a wide range of benefits for our permanent full-time employees. Highlights include: UNITED STATES Unique full-time work schedule that includes every other Friday off Full Medical, Dental and Prescription Drug Insurance Flexible Spending Accounts Generous 401(k) match Company-paid and Voluntary Life Insurance plans Paid Holidays and Paid Time Off Days Reimbursement Programs (Gym, Tuition, etc.) Paid time off to volunteer Company-Paid Short Term Disability CANADA Full benefits package Company-paid and Voluntary Life Insurance plans Paid Holidays and Paid Time Off Days Reimbursement Programs (Gym, Tuition, etc.) Pension plan Paid parental leave Amphenol Borisch Technologies is proud to be an Affirmative Action/Equal Employment Opportunity employer. We consider applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, status as a protected veteran, or status as a qualified individual with disability.