616 jobs found

Pre-Install Configuration Technician I US-TX-Irving Job ID: 34060 Type: Full-Time # of Openings: 1 Category: Warehouse CUSA SW Regional Office About the Role Pre-Install Technician performs basic pre-install and setup of all assigned machines per Canon USA Pre-Install/Configuration Shop Standards. Begins OJT training in configuration. May also be required to complete basic used equipment evaluations. Continues to pursue development of technical skills via Canon training and OJT, and assists in other Logistics areas as assigned. Your Impact '- Performs assigned pre-installs /configurations each day at or above the established benchmark for the model. - Maintains appropriate monthly average labor time for "S" calls, dependent on assigned work load and availability. - Achieves monthly accountability expectations for position (based on shop tech matrix). - Maintains constant high level of work quality and consistent conformance with published standards. - Maintains all technical information and Canon property assigned. - Communicates well with fellow team members, and other Internal departments regarding the timely completion of assigned work related to pre-installs and/or preparation of Used machines. - Assists and/or cross train in other Logistics functions as assigned. - Available to work overtime, as required, which may include weekends. - Consistently follows all documented shop processes and procedures. - Maintains shop cleanliness and security. About You: The Skills & Expertise You Bring HS Diploma, GED, or equivalent experience required, plus less than one year of related experience. - Degree in Electronics, or equivalent training in Military/Trade School/Industry, with at least 1 year Electrical/Mechanical industry experience, or at least three months hands on pre-install experience as a temporary employee. - Good working knowledge of personal computers, general and office application software. - Basic understanding of networking. - Capable of accessing E-support via a computer and using other on-line tools. - Capable of updating System Software on Canon connected device. - Logical thinking possessing ability to learn and apply acquired knowledge. - Ability to gain working knowledge and aptitude on all current Canon MFDs. - Good technical and non-technical communication skills. - Demonstrates a willingness and is successful at working in a team environment. - Demonstrates a positive work attitude. - Strong communication skills. - Begins OTJ Training in configuration of MFDs within segments 1-7. (Seg 1: Up to 20 PPM, Seg 2: 21 - 30 PPM, Seg 3: 31-40 PPM, Seg 4: 41-69 PPM, Seg 5: 70-90 PPM, Seg 6: 91-109 PPM, Seg 7: Over 109 PPM). - Works under close supervision for several months to a year. - Must complete foundational training within first year of employment (Online Pre-Req and classroom training). - Must be in position and show consistent performance for minimum of one year, prior to consideration for promotion. - Travel to support other RDCs as assigned (valid driver's license and acceptable driving record necessary). - Must be able to frequently lift up to 50 lbs. - Must be able to lift up to 75 lbs. with assistance/using a team lift. - Frequent kneeling and standing. - Potential repetitive use of manual screw drivers. - Use of chemical cleaning solvent. In accordance with applicable law, we are providing the anticipated rate for this role: $17.20 - 21.15 hourly. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at Posting Tags PIb873119db14d-8187

Make a difference, protect lives, and achieve your dreams. Build your career with the industry-leading fire, life safety and security company. This position is responsible for servicing, installing, maintaining, and inspecting security systems. Ensure that all systems and components are maintained according to industry standards and the operational requirements of the customer. Essential Duties & Responsibilities: Install security systems or appropriate devices, dismantle and/or reconstruct equipment as required by customer or the Company. Conduct testing and inspection of systems under maintenance agreement. Respond to and complete system troubleshooting and repairs. Make connections and required adjustments as directed, test operation of all components of each system. Conduct site surveys upon request of management. Keep manuals and all details up to date as changes are advised. Report on activities completed, deferred, or requiring further action or material to management. Communicate with customers on job status or completion (installation or service). Write service and status reports. Submit complete and accurate paperwork in a timely manner. Obtain proper signatures. Accurately record travel and service times, timesheets, identify warranties, changes and code issues and provide accurate descriptions. Ability to work independently on customer sites Perform other duties assigned by management. Education/Qualification: A high school education or equivalent required. Some technical school training is a plus. Ability to operate hand and power tools. Ability to always operate fleet vehicle in a safe manner. Experience in a fast-paced environment with multiple stakeholders. Other Duties: Adheres to the Code of Conduct, Confidentiality Agreement, and Company Safety Policy. Performs other duties as assigned. Physical Requirements: Maybe required to sit; climb or balance; stoop, kneel, crouch or crawl. Must be able to walk and stand. Comfortable reaching, climbing (ladder/stairs) and bending. Must be able to verbally communicate via telephone. Must be able to lift and/or move up to 60 pounds. Starting Pay: $20-25.00 per hour based on experience Benefits and Perks: Excellent pay Medical, dental, vision Company paid life insurance Company paid short-term disability 401K with employer match Paid vacation and company holidays Training and Career Development Company vehicle (if job applicable) Immediate qualification for the ALL In Ownership Plan for all eligible full-time employees Pye-Barker Fire and Safety is an Equal Opportunity Employer By applying, you consent to your information being transmitted to the Employer by SonicJobs. See Pye-Barker Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Make a difference, protect lives, and achieve your dreams. Build your career with the industry-leading fire, life safety and security company. This position is responsible for the proper installation, operation, and maintenance of fire suppression systems. Responsibilities include inspecting, testing and performing system checks in accordance with fire code, identifying code and system deficiencies, and preparing accurate and timely inspection reports. Salary Pay range: $35/hr-$45/hr (Depending on experience) Essential Duties & Responsibilities: Install or upgrade suppression systems in commercial and residential buildings Test and repair systems already in place Perform inspections to ensure suppression systems are installed according to code Complete detailed inspection reports, documenting any issues Report results of work completed in an accurate and timely manner Protect and maintain company equipment. Inspect and maintain the truck and all related equipment, putting in repair requests as necessary to maintain safe operation. Operate warehouse equipment, including vehicles, in a way that facilitates the loading and unloading of the truck while observing all safety regulations and manufacturer's safety instructions for that equipment. Work in a safe manner as outlined by company safety procedures including driver safety and personal protective equipment. Respond to emergency service calls Maintain a clean and safe workspace Perform other duties assigned by management. Education/Qualification: Experience with commercial and residential systems A minimum of 2 years suppression system experience required Troubleshooting skills. Must have good interpersonal skills and be able to work in a team environment as well as work independently. Must have a valid drivers license Must be flexible with scheduling requirements that occasionally will require evening, weekend and/or out-of-town assignments. Other Duties: Adheres to the Code of Conduct, Confidentiality Agreement, and Company Safety Policy. Performs other duties as assigned. Physical Requirements: While performing the essential functions of this job the employee is regularly required to stand, walk, use hands to finger, handle, or feel, reach with hands or arms, stoop, kneel, crouch, or crawl, and is occasionally required to lift and/or move heavy objects. The work also requires the following physical abilities in order to perform the essential job functions: balancing, climbing, grasping, hearing, mental acuity, pulling, pushing, repetitive motion, speaking, talking, and visual acuity. Benefits and Perks: Excellent pay Medical, dental, vision Company paid life insurance Company paid short-term disability 401K with employer match Paid vacation and company holidays Training and Career Development Company vehicle (if job applicable) Immediate qualification for the ALL In Ownership Plan for all eligible full-time employees Pye-Barker Fire and Safety is an Equal Opportunity Employer By applying, you consent to your information being transmitted to the Employer by SonicJobs. See Pye-Barker Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Build Your Career in Semiconductor Equipment Technology Uptime Crew develops engineers and technicians built for environments where precision, discipline, and reliability keep the world running. In this role, you ll work on the advanced equipment used in semiconductor manufacturing - the technology that powers everything from smartphones and cloud computing to artificial intelligence. If you are mechanically inclined, curious about how complex systems work, and ready to build real technical expertise, this role offers a direct path into one of the most important industries shaping the future of technology. What We Offer: Structured Training: Start with an intensive training program designed to prepare you for work in semiconductor manufacturing environments. You ll learn the fundamentals of equipment systems, troubleshooting, and operational procedures through instruction and simulated real-world scenarios. Mentorship & Network: Work alongside experienced engineers and technicians who will support your development as you build technical expertise in a fast-paced industry. More Than Just a Foot in the Door: This role offers more than a job. It s an opportunity to build real technical skills, gain experience working on advanced manufacturing systems, and develop a career in one of the world s most important technology industries. Pay: $60,000 Your Role as a Field Service Engineer: Your responsibilities will include, but are not limited to: Work in a cleanroom environment wearing PPE (cleanroom suit, gloves, etc) Perform on-site service and repair of semiconductor processing equipment Set up and operate equipment according to Standard Operating Procedures (SOPs) Work closely with engineers, technicians, and operations teams to quickly resolve equipment issues and minimize production downtime Perform all tasks in a safe and responsible manner, supporting all Environmental, Health, Safety & Security programs and requirements Troubleshoot equipment problems, maintains records and reports as required Respond to emergency service calls as required Instruct customer operating technicians on system operation and maintenance Perform upgrades and modifications to equipment as needed Remain current on equipment/tools through appropriate training, manuals, factory periodicals, and other relevant materials Demonstrate ability to follow instructions with strong attention to details Are You the Right Fit? If you re mechanically inclined, detail-oriented, and motivated to work with advanced technology in high-performance environments, you may be a strong fit for Uptime Crew. Successful Applicants Must: Pass a mechanical aptitude test Be legally authorized to work in the U.S., without employer sponsorship Live in or be willing to relocate to the location where this role is based Have reliable transportation Be willing to travel domestically and internationally (travel may be frequent) Have ability to obtain passport Be flexible to cover multiple shifts (AM/PM) as needed Be 18 years or older to apply Qualifications: Pre-existing mechanical skills and a passion for learning The ability to pick up different technical skills Problem solving & critical thinking skills Effective communication skills written and verbal Ability to work flexible shift schedules Excitement, eagerness, and ability to learn quickly Physical & Skill Requirements Manual dexterity and ability to lift & carry objects up to 50 pounds is required. Bend, stoop, and stretch as required for placement and retrieval of devices, materials, or equipment Must be comfortable wearing a cleanroom uniform (bunny suit) for entirety of shift (excluding breaks) Ability to stand for 12-hour shifts (excluding breaks) Basic computer and email skills required Demonstrated ability to follow instructions Ability to find information in spreadsheets or on websites Strong attention to detail May require bending, stooping, crawling, climbing May require walking up to and more than 10,000 steps and walking up and down multiple flights of stairs per shift (12 hours) Benefits: Paid Training Health Insurance including Vision and Dental Matching 401K Voluntary Life Insurance Relocation Reimbursement 11 paid days off a year (Federal holidays & Paid Time Off) Industry Certifications Amazing company culture Preferred Qualifications Previous experience in maintenance, repair, and troubleshooting Excellent customer interface, problem solving & critical thinking skills Pre-existing mechanical/electrical/technical skills and passion for learning Uptime Crew is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Principles only. Recruiters please do not contact this job poster. Do NOT contact us with unsolicited services or offers.

Brief description: The position involves assisting the Business Technology (BT) support teams with the technical support of IT infrastructure technology which includes, but is not limited to the following devices - workstations, laptops, iPads, PDA devices, printers, network equipment, telephones, backup appliances, wireless access points, server equipment, storage devices, routers, switches, and any other technology used to conduct business at an operating company facility. It also involves training the Support Specialist I associates as well as continued knowledge transfer to the BT support technicians. Additional requirements are to actively contribute to the development of policies and procedures to continuously improve and simplify technology services across the Sysco enterprise. This position is also responsible for participating in hardware roadmap planning sessions and testing new products to validate compatibility and functionality. In Addition, this position will also be the local escalation contact for any related IT support issues. Escalations will flow up to their Sysco Team Leads and to the BT Support Leads to quickly resolve any issues. This position will be the local corporate IT representative to answer any IT related question and to train the local staff how to enter service requests, how to prioritize service requests, assign service requests, and how to best utilize the current support model. In addition, this position will keep local management informed on technology trends and local alignment with the trends to best maintain system availability. This position will be expected to meet with local senior management on a regular basis to keep management informed on proactive refresh cycles, hot spare inventory, anti-virus compliance, patch compliance, enterprise upgrade projects, data backups, and the general health of their local technology. This position will require technical skills to be able to support and repair laptops, workstations, PDA devices, mobile computing technology, and the operating system and software associated with these devices. Additional support responsibilities will include coordinating enterprise workstation OS deployment, providing support for printers and peripherals, coordinating and validating problem resolution for warranty or third party on-site repairs on all IT equipment and providing secondary support as required for the Communications and System Support technicians. Supervisor: Team Leader, IT Local Support Specialist Classification: Non-Exempt Educational requirements: H.S. Diploma and minimum 5 years' experience associated with end user technology support and IT related environments. Special requirements: Minimum of five years customer service experience in Computer Technology. Must possess excellent communication (written and verbal), organizational, and problem solving skills. Must effectively interact with several different personalities and levels of management. Must be self-motivated, resourceful, reliable, and trustworthy. Must be proficient at technical troubleshooting of desktop and laptop computers, mobile technology devices, Microsoft Windows, Microsoft Office, and other desktop software. Must have experience with supporting, installing, and configuring Order Entry applications. Must be able to use remote support tools to be able to troubleshoot remote computer devices. Must be available for after hour support and weekend on-call support as needed. Description of Responsibilities: Prioritize support calls using enterprise ticketing system and manage tickets with frequent updates, as well as escalating aging tickets, and trends as required. Purchase new equipment, repair parts, mice, keyboards, batteries, printer toner, supplies, etc. for workstations, laptops and peripherals devices from the approved standards list through Corporate IT Purchasing. Ensures software and hardware standards are adhered to at all times based on guidance from Corporate Contribute to the development of policies and procedures. Ensuring software license compliance with all installed software Responsible for imaging workstations using the standard images Maintains and adheres to current system security policy Ensure client agents for discovery tools, anti-virus and patch compliance updates are maintained at the most current levels Provides secondary on-site support and knowledge transfer to the Desktop/Laptop support team and the Support Specialist I associates as required. Account administration and support for Order Entry applications Assists with desktop hardware relocation where required. Responsible for local printers/copiers/faxes network connectivity, preliminary troubleshooting, toner replacement and coordination of third party on-site support. Responsible for and/or assists in special projects as assigned to include product evaluations and roadmap planning sessions. Maintain reliable "Hot Spare" Laptop/Desktop systems Train and assist end users to effectively utilize the enterprise ticketing system Dispose of old computer equipment utilizing approved recycling vendors. Provide onsite hands on support for devices supported by Infrastructure support teams. Provides telephone and mobile phone support, including voicemail and account administration, deployment/replacement of equipment. Assists with support of wireless access points, VPN connectivity, and company issued mobile telephone devices. Provides after hours and round-the-clock support for emergency trouble calls when needed. Additional Duties: As required by Manager

Build Your Career in Semiconductor Equipment Technology Uptime Crew develops engineers and technicians built for environments where precision, discipline, and reliability keep the world running. In this role, you ll work on the advanced equipment used in semiconductor manufacturing - the technology that powers everything from smartphones and cloud computing to artificial intelligence. If you are mechanically inclined, curious about how complex systems work, and ready to build real technical expertise, this role offers a direct path into one of the most important industries shaping the future of technology. What We Offer: Structured Training: Start with an intensive training program designed to prepare you for work in semiconductor manufacturing environments. You ll learn the fundamentals of equipment systems, troubleshooting, and operational procedures through instruction and simulated real-world scenarios. Mentorship & Network: Work alongside experienced engineers and technicians who will support your development as you build technical expertise in a fast-paced industry. More Than Just a Foot in the Door: This role offers more than a job. It s an opportunity to build real technical skills, gain experience working on advanced manufacturing systems, and develop a career in one of the world s most important technology industries. Pay: $60,000 Your Role as a Field Service Engineer: Your responsibilities will include, but are not limited to: Work in a cleanroom environment wearing PPE (cleanroom suit, gloves, etc) Perform on-site service and repair of semiconductor processing equipment Set up and operate equipment according to Standard Operating Procedures (SOPs) Work closely with engineers, technicians, and operations teams to quickly resolve equipment issues and minimize production downtime Perform all tasks in a safe and responsible manner, supporting all Environmental, Health, Safety & Security programs and requirements Troubleshoot equipment problems, maintains records and reports as required Respond to emergency service calls as required Instruct customer operating technicians on system operation and maintenance Perform upgrades and modifications to equipment as needed Remain current on equipment/tools through appropriate training, manuals, factory periodicals, and other relevant materials Demonstrate ability to follow instructions with strong attention to details Are You the Right Fit? If you re mechanically inclined, detail-oriented, and motivated to work with advanced technology in high-performance environments, you may be a strong fit for Uptime Crew. Successful Applicants Must: Pass a mechanical aptitude test Be legally authorized to work in the U.S., without employer sponsorship Live in or be willing to relocate to the location where this role is based Have reliable transportation Be willing to travel domestically and internationally (travel may be frequent) Have ability to obtain passport Be flexible to cover multiple shifts (AM/PM) as needed Be 18 years or older to apply Qualifications: Pre-existing mechanical skills and a passion for learning The ability to pick up different technical skills Problem solving & critical thinking skills Effective communication skills written and verbal Ability to work flexible shift schedules Excitement, eagerness, and ability to learn quickly Physical & Skill Requirements Manual dexterity and ability to lift & carry objects up to 50 pounds is required. Bend, stoop, and stretch as required for placement and retrieval of devices, materials, or equipment Must be comfortable wearing a cleanroom uniform (bunny suit) for entirety of shift (excluding breaks) Ability to stand for 12-hour shifts (excluding breaks) Basic computer and email skills required Demonstrated ability to follow instructions Ability to find information in spreadsheets or on websites Strong attention to detail May require bending, stooping, crawling, climbing May require walking up to and more than 10,000 steps and walking up and down multiple flights of stairs per shift (12 hours) Benefits: Paid Training Health Insurance including Vision and Dental Matching 401K Voluntary Life Insurance Relocation Reimbursement 11 paid days off a year (Federal holidays & Paid Time Off) Industry Certifications Amazing company culture Preferred Qualifications Previous experience in maintenance, repair, and troubleshooting Excellent customer interface, problem solving & critical thinking skills Pre-existing mechanical/electrical/technical skills and passion for learning Uptime Crew is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Principles only. Recruiters please do not contact this job poster. Do NOT contact us with unsolicited services or offers.

Part of the Patient Care Delivery Team. Provides support to a team of healthcare providers within the hospital. Serves as the unit's centralized focus of administration, information and communication during an assigned shift. Under direct supervision, assist with provision of patient care which may include patient data collection, assistance with transportation, nutrition and comfort. Maintains clerical organization within the unit. Monitors admission, providing follow-up notifications as needed. Participates in a safe, patient-centered care environment with quality patient care delivery, efficient patient flow and effective communication with the healthcare team. PIH Health is a nonprofit, regional healthcare network that serves approximately 3 million residents in the Los Angeles County, Orange County and San Gabriel Valley region. The fully integrated network is comprised of PIH Health Downey Hospital, PIH Health Good Samaritan Hospital, PIH Health Whittier Hospital, 37 outpatient medical office buildings, a multispecialty medical (physician) group, home healthcare services and hospice care, as well as heart, cancer, digestive health, orthopedics, women's health, urgent care and emergency services. The organization is nationally recognized for excellence in patient care and patient experience, and the College of Healthcare Information Management Executives (CHIME) has identified PIH Health as one of the nation's top hospital systems for best practices, cutting-edge advancements, quality of care and healthcare technology. For more information, visit PIHHealth.org or follow us on FacebookTwitter, or Instagram Required Skills Written and verbal communications, interpersonal skills Basic organizational skills Basic computer skills including the use of Windows and Mouse Demonstrated team member abilities Ability to follow directions as outlined in policies or given by supervisor Required Experience High school graduate or GED 1-2 years hospital/healthcare experience in clerical, unit clerking or Medical Assistant preferred Basic knowledge of medical terminology or completion of course within six months Current BLS certification Address 12401 Washington Blvd. Salary 22.25-22.25 Shift Nights Shift Differential 1.93 Zip Code 90602

Job Title: Coder 2 Health Information Management (HIM) Location: San Bernardino, CA Job Type: Full-Time Pay: $30.00 $35.00 per hour Job Summary: We are seeking a detail-oriented Coder 2 HIM to join our team in a remote, full-time role. The Coder 2 is responsible for performing ICD and CPT coding and abstracting data from the legal medical record for healthcare facilities. This position assigns diagnosis and procedure codes in compliance with the American Hospital Association Official Coding Guidelines and ensures the accuracy and quality of coded and abstracted information in accordance with federal and state regulations, as well as government and contract payer requirements. The quality and accuracy of the data collected impacts multiple areas including finance, legal compliance, research, teaching, and quality assurance . The ideal candidate will have experience performing inpatient and/or outpatient surgery coding and will work collaboratively with team members while also assisting with students or coding interns when requested. Key Responsibilities: Perform accurate ICD and CPT coding from medical records. Abstract and review clinical data from legal medical records. Ensure compliance with AHA Official Coding Guidelines , federal and state regulations, and payer requirements. Maintain high standards for data quality and accuracy. Manage workload effectively while meeting productivity and quality expectations. Collaborate with team members and assist with coding students or interns as needed. Perform other duties as assigned. Education and Experience: Completion of a Coding Certificate Program or Associates Degree in Health Information Management required. Minimum of 3 years of coding experience required. Experience with inpatient coding Knowledge and Skills: Knowledge of medical terminology preferred. Understanding of coding standards established by the American Health Information Management Association (AHIMA) . Proficiency with computer systems and programs such as Word, Excel, Outlook, and PowerPoint . Strong attention to detail and ability to maintain coding accuracy. Ability to prioritize tasks, manage multiple assignments, and work independently with minimal supervision. Excellent communication and interpersonal skills . Ability to work effectively in a fast-paced environment and respond professionally under pressure. Licensure/Certification Required: One of the following credentials through AHIMA : Certified Coding Specialist (CCS) Registered Health Information Administrator (RHIA) Registered Health Information Technician (RHIT) Pre-Screening Questions (AI Should Ask These): Certifications: Do you have a valid RHIT (Registered Health Information Technician) certification? Skills: Do you have experience with task prioritization and managing multiple assignments? Do you have at least 3 years of inpatient coding experience ? Education: Do you have an Associates Degree (preferably in Health Information Management or a related field)? &T PandoLogic. Category:Healthcare,

A career with purpose. A career built on making dreams come true. A career built on building zero defect homes, cost management, and adherence to schedules. Your Responsibilities on the Team Operational Strategy & Continuous Improvement Own and evolve the onsite IT operating model, ensuring it scales effectively across Division and Field Offices. Identify systemic issues, inefficiencies, and recurring pain points; lead improvement initiatives that address root causes rather than symptoms. Drive standardization of processes, tools, and service delivery approaches to reduce variability and improve predictability. Balance service quality, cost, and speed by making informed tradeoff decisions within existing constraints. Performance Management & Insight Define, analyze, and act on KPIs and service metrics to guide decision making and operational improvements. Ensure SLAs are not only met but used as inputs to refine processes, capacity planning, and support models. Translate operational data into clear insights and recommendations for IT leadership and business stakeholders. Team Leadership & Capability Building Lead and develop a team of Onsite IT technicians by setting clear expectations, priorities, and outcomes. Focus technician effort on high value work by eliminating rework, inefficiencies, and unnecessary manual processes. Provide coaching, mentorship, and development opportunities that build a resilient, adaptable, and accountable team. Enterprise Alignment & Cross Functional Collaboration Partner closely with Infrastructure, Security, Engineering, and Service Desk teams to deliver integrated, end to end solutions. Serve as the onsite IT execution lead for enterprise initiatives, ensuring successful adoption and operational readiness at the field level. Act as an advocate for Division and Field Office needs, ensuring field realities inform enterprise planning and prioritization. Governance, Documentation & Standards Promote governance and adherence to enterprise IT policies, SOPs, and frameworks such as ITIL and ISO 27001. Ensure operational documentation, knowledge articles, and onboarding materials are current, effective, and enable consistent execution. Champion a culture of accountability, transparency, and customer focused service across onsite IT. What Success Looks Like Fewer recurring incidents due to systemic fixes rather than repeated response Clear, trusted operational metrics used to guide leadership decisions A predictable, scalable onsite IT experience across all supported locations Technicians spending more time on planned, value add work and less time firefighting Strong alignment between enterprise IT strategy and field level execution Requirements Required 5+ years of relevant IT experience, including leadership or supervisory responsibility Demonstrated experience improving IT operations, service delivery, or support models Strong communication and stakeholder management skills Preferred Bachelors degree or equivalent professional experience ITIL certification or strong working knowledge of IT service management principles Core Skills & Attributes Operational and systems thinking; ability to assess current state and design improved future state Comfort making prioritization and tradeoff decisions with limited resources Experience improving outcomes without adding headcount or budget Ability to influence across teams without direct authority Solid understanding of infrastructure fundamentals, security integration, and service delivery Strong written and verbal communication skills High degree of professional integrity, accountability, and customer focus Adaptable and effective in a fast paced, evolving environment

Mechanical Contractor expanding in the Columbus area- commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: A full-service mechanical (HVAC) subcontractor in Ohio that focuses on commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. Why join us? Comprehensive medical, dental, and vision plans Competitive PTO package Sick Time Short Term, and Long Term Disability Employee Referral Program 401(k) Savings Plan Job Details Currently seeking a Building Automation Sales professional to join a full-service mechanical (HVAC) subcontractor in the Columbus area. We are seeking a proactive and results-driven individual to help drive our mission to create smarter, more efficient buildings. Job Details: Estimate, plan, specify, and negotiate building automation and energy services solutions in both the new construction and retrofit markets. Develop long-term business to business relationships with BAS customers by providing consulting support to architects, engineers, contractors, and owners for building control and mechanical systems. Interface with company engineers and technicians to ensure successful project implementation. Provide industry presentations and seminars to educate and influence the consulting, contracting, and building engineering communities. Call on customers that include but are not limited to, data centers, hospital and healthcare facilities, government buildings, school districts, and higher education buildings. Requirements: Engineering undergraduate degree or equivalent combination of education and experience Building Controls and/or Mechanical systems experience, or familiarity through education if trainee. Professional business to business sales experience, Knowledge of DDC Control Theory & Applications and Mechanical systems Familiarity with one or more of the following platforms: Siemens, Schneider Electric, Johnson Controls, Alerton, Delta Controls, Trane, or ALC Experience with Tridium Niagara would be a plus Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:

Advanced building automation and energy-management solutions This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $45 per hour A bit about us: We are seeking a detail-oriented and technically skilled HVAC Controls Engineer to join our growing team. In this role, you'll be responsible for designing and developing submittal packages and owner's manuals for Building Automation Systems (BAS). You'll play a key role in ensuring system designs meet performance, operational, and client expectations-working closely with sales teams, project managers, and technicians throughout the project lifecycle. Why join us? Competitive Base Salary! 401K, PTO, and excellent benefits! Accelerated Career Growth! Job Details Responsibilties: Design DDC control panels, wiring schematics, and system interfaces to control HVAC, electrical, and plumbing systems. Develop sequences of operation and system layouts tailored to project specifications. Create electrical wiring diagrams and floorplan graphics for user interfaces. Select appropriate control system components and compile project bill of materials (BOM). Collaborate with Project Managers and Control Technicians to prepare submittal packages and owner's manuals. Review contract plans, specifications, and budgets with project stakeholders. Provide documentation support to contractors and clients throughout the project lifecycle. Coordinate schedules and provide regular updates to internal teams to ensure project milestones are met. Ensure all documentation aligns with project deadlines and quality standards. Qualifications: Strong time management and organizational skills Problem-solving mindset and attention to detail Team player with excellent communication skills Customer-focused approach Ability to troubleshoot and adapt to changing project needs Valid driver's license Ability to pass a background check Nice to have: 1+ years of experience in HVAC, electrical systems, PLCs, or building automation Associate degree in HVAC, Electrical, Drafting, or Engineering (or equivalent technical education) Experience with Computer-Aided Drafting (CAD) Familiarity with Microsoft Office Suite, Excel, Microsoft Visio, and Adobe Illustrator Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:

Mechanical Contractor expanding in the Columbus area- commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: A full-service mechanical (HVAC) subcontractor in Ohio that focuses on commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. Why join us? Comprehensive medical, dental, and vision plans Competitive PTO package Sick Time Short Term, and Long Term Disability Employee Referral Program 401(k) Savings Plan Job Details Currently seeking a Building Automation Sales professional to join a full-service mechanical (HVAC) subcontractor in the Columbus area. We are seeking a proactive and results-driven individual to help drive our mission to create smarter, more efficient buildings. Job Details: Estimate, plan, specify, and negotiate building automation and energy services solutions in both the new construction and retrofit markets. Develop long-term business to business relationships with BAS customers by providing consulting support to architects, engineers, contractors, and owners for building control and mechanical systems. Interface with company engineers and technicians to ensure successful project implementation. Provide industry presentations and seminars to educate and influence the consulting, contracting, and building engineering communities. Call on customers that include but are not limited to, data centers, hospital and healthcare facilities, government buildings, school districts, and higher education buildings. Requirements: Engineering undergraduate degree or equivalent combination of education and experience Building Controls and/or Mechanical systems experience, or familiarity through education if trainee. Professional business to business sales experience, Knowledge of DDC Control Theory & Applications and Mechanical systems Familiarity with one or more of the following platforms: Siemens, Schneider Electric, Johnson Controls, Alerton, Delta Controls, Trane, or ALC Experience with Tridium Niagara would be a plus Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:

Advanced building automation and energy-management solutions This Jobot Job is hosted by: Gene Choi Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $45 per hour A bit about us: We are seeking a detail-oriented and technically skilled HVAC Controls Engineer to join our growing team. In this role, you'll be responsible for designing and developing submittal packages and owner's manuals for Building Automation Systems (BAS). You'll play a key role in ensuring system designs meet performance, operational, and client expectations-working closely with sales teams, project managers, and technicians throughout the project lifecycle. Why join us? Competitive Base Salary! 401K, PTO, and excellent benefits! Accelerated Career Growth! Job Details Responsibilties: Design DDC control panels, wiring schematics, and system interfaces to control HVAC, electrical, and plumbing systems. Develop sequences of operation and system layouts tailored to project specifications. Create electrical wiring diagrams and floorplan graphics for user interfaces. Select appropriate control system components and compile project bill of materials (BOM). Collaborate with Project Managers and Control Technicians to prepare submittal packages and owner's manuals. Review contract plans, specifications, and budgets with project stakeholders. Provide documentation support to contractors and clients throughout the project lifecycle. Coordinate schedules and provide regular updates to internal teams to ensure project milestones are met. Ensure all documentation aligns with project deadlines and quality standards. Qualifications: Strong time management and organizational skills Problem-solving mindset and attention to detail Team player with excellent communication skills Customer-focused approach Ability to troubleshoot and adapt to changing project needs Valid driver's license Ability to pass a background check Nice to have: 1+ years of experience in HVAC, electrical systems, PLCs, or building automation Associate degree in HVAC, Electrical, Drafting, or Engineering (or equivalent technical education) Experience with Computer-Aided Drafting (CAD) Familiarity with Microsoft Office Suite, Excel, Microsoft Visio, and Adobe Illustrator Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:

Mechanical Contractor expanding in the Columbus area- commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $150,000 per year A bit about us: A full-service mechanical (HVAC) subcontractor in Ohio that focuses on commercial, residential and industrial heating, air conditioning, ventilation and refrigeration systems. Why join us? Comprehensive medical, dental, and vision plans Competitive PTO package Sick Time Short Term, and Long Term Disability Employee Referral Program 401(k) Savings Plan Job Details Currently seeking a Building Automation Sales professional to join a full-service mechanical (HVAC) subcontractor in the Columbus area. We are seeking a proactive and results-driven individual to help drive our mission to create smarter, more efficient buildings. Job Details: Estimate, plan, specify, and negotiate building automation and energy services solutions in both the new construction and retrofit markets. Develop long-term business to business relationships with BAS customers by providing consulting support to architects, engineers, contractors, and owners for building control and mechanical systems. Interface with company engineers and technicians to ensure successful project implementation. Provide industry presentations and seminars to educate and influence the consulting, contracting, and building engineering communities. Call on customers that include but are not limited to, data centers, hospital and healthcare facilities, government buildings, school districts, and higher education buildings. Requirements: Engineering undergraduate degree or equivalent combination of education and experience Building Controls and/or Mechanical systems experience, or familiarity through education if trainee. Professional business to business sales experience, Knowledge of DDC Control Theory & Applications and Mechanical systems Familiarity with one or more of the following platforms: Siemens, Schneider Electric, Johnson Controls, Alerton, Delta Controls, Trane, or ALC Experience with Tridium Niagara would be a plus Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: