1010 Analog Devices Inc.
Wilmington, Massachusetts
About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X) . Senior Principal SoC Architect - Robotics & Industrial Automation Location: Wilmington, MA Job Type: Full-time, Regular Travel Required: Yes, up to 10% About the Role Analog Devices is seeking a Senior Principal SoC Architect to lead the definition and development of next-generation mixed-signal System-on-Chip (SoC) platforms for robotics, industrial automation, motion control, and functional safety applications. This is a high-impact role for a technically exceptional architect with deep expertise in digital systems, industrial motion control, Ethernet protocols, vison and analog/mixed-signal integration. You will work across cross-functional teams-digital, analog, firmware, software, and systems-to define differentiated SoC architectures that power intelligent edge devices in factory automation, robotics, and precision control systems. Key Responsibilities Innovation & Strategy: Stay ahead of emerging trends in robotics, industrial connectivity, edge compute, and cybersecurity to guide long-term roadmap architectural decisions. Architectural Leadership: Define and drive SoC architecture for industrial-grade mixed-signal ICs, integrating digital accelerators, real-time control, and safety subsystems. Cybersecurity & Compliance: Embed hardware and software security features aligned with IEC 62443 and EU Cyber Resilience Act (CRA) requirements. Architect secure boot, trusted execution environments, and cryptographic accelerators. Federated Learning Enablement: Architect edge compute platforms capable of supporting federated learning for distributed sensing systems, enabling privacy-preserving AI across industrial nodes. Cross-Functional Collaboration: Partner with analog, motion control, firmware, and system/software teams to ensure cohesive system-level design and integration, recommending partitioning tradeoffs to optimize constrained edge devices. Industrial Ethernet Expertise: Incorporate support for protocols such as EtherCAT, EtherNet/IP, PROFINET and upcoming TSN field protocols like OPC UA FX with standards compliant HW and secure communications stacks Motion Control & Functional Safety: Architect real-time control loops, motor control interfaces, and safety islands compliant with IEC 61508, SIL2/3 and emerging safety standards in the industrial and robotics space. Digital System Design: Specify and model digital subsystems including processor cores, memory hierarchies, bus fabrics, and signal processing blocks. Customer Engagement: Collaborate with strategic customers and ecosystem partners to define requirements and validate architectural decisions. Required Qualifications MSEE or PhD in Electrical Engineering, Computer Engineering, or related field. 10+ years of experience in digital IC design and SoC architecture. Proven track record in delivering complex SoCs. Deep understanding of: Digital signal processing and control systems Industrial Ethernet protocols and networking stacks Functional safety architectures and standards Embedded security and secure firmware Embedded firmware and hardware/software co-design Analog-digital partitioning Proficiency in RTL design (Verilog/SystemVerilog), modeling (MATLAB, SystemC), and simulation. Strong communication and documentation skills. Preferred Qualifications Experience with tactile sensing systems, haptics, or robotic feedback loops. Experience with Vision Processing Units architecture Familiarity with motion control systems, servo drives, and robotics. Familiarity with federated learning platforms (e.g., TensorFlow Federated, PySyft). Experience with system-level modeling and verification methodologies. Exposure to high-volume IC productization and manufacturing. Experience with safety and cybersecurity certification processes and tools. Why Join Us? This is a rare opportunity to shape the future of industrial automation and robotics through advanced SoC design. You'll work with a passionate, multidisciplinary team on impactful technologies that bridge the physical and digital worlds. Our mission is to enable intelligent, safe, and connected industrial systems-and we're looking for architects who share that vision. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law . Job Req Type: Experienced Required Travel: Yes, 10% of the time Shift Type: 1st Shift/Days The expected wage range for a new hire into this position is $184,030 to $266,485. Actual wage offered may vary depending on work location , experience, education, training, external market data, internal pay equity, or other bona fide factors. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.
03/15/2026
Full time
About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible . Learn more at and on LinkedIn and Twitter (X) . Senior Principal SoC Architect - Robotics & Industrial Automation Location: Wilmington, MA Job Type: Full-time, Regular Travel Required: Yes, up to 10% About the Role Analog Devices is seeking a Senior Principal SoC Architect to lead the definition and development of next-generation mixed-signal System-on-Chip (SoC) platforms for robotics, industrial automation, motion control, and functional safety applications. This is a high-impact role for a technically exceptional architect with deep expertise in digital systems, industrial motion control, Ethernet protocols, vison and analog/mixed-signal integration. You will work across cross-functional teams-digital, analog, firmware, software, and systems-to define differentiated SoC architectures that power intelligent edge devices in factory automation, robotics, and precision control systems. Key Responsibilities Innovation & Strategy: Stay ahead of emerging trends in robotics, industrial connectivity, edge compute, and cybersecurity to guide long-term roadmap architectural decisions. Architectural Leadership: Define and drive SoC architecture for industrial-grade mixed-signal ICs, integrating digital accelerators, real-time control, and safety subsystems. Cybersecurity & Compliance: Embed hardware and software security features aligned with IEC 62443 and EU Cyber Resilience Act (CRA) requirements. Architect secure boot, trusted execution environments, and cryptographic accelerators. Federated Learning Enablement: Architect edge compute platforms capable of supporting federated learning for distributed sensing systems, enabling privacy-preserving AI across industrial nodes. Cross-Functional Collaboration: Partner with analog, motion control, firmware, and system/software teams to ensure cohesive system-level design and integration, recommending partitioning tradeoffs to optimize constrained edge devices. Industrial Ethernet Expertise: Incorporate support for protocols such as EtherCAT, EtherNet/IP, PROFINET and upcoming TSN field protocols like OPC UA FX with standards compliant HW and secure communications stacks Motion Control & Functional Safety: Architect real-time control loops, motor control interfaces, and safety islands compliant with IEC 61508, SIL2/3 and emerging safety standards in the industrial and robotics space. Digital System Design: Specify and model digital subsystems including processor cores, memory hierarchies, bus fabrics, and signal processing blocks. Customer Engagement: Collaborate with strategic customers and ecosystem partners to define requirements and validate architectural decisions. Required Qualifications MSEE or PhD in Electrical Engineering, Computer Engineering, or related field. 10+ years of experience in digital IC design and SoC architecture. Proven track record in delivering complex SoCs. Deep understanding of: Digital signal processing and control systems Industrial Ethernet protocols and networking stacks Functional safety architectures and standards Embedded security and secure firmware Embedded firmware and hardware/software co-design Analog-digital partitioning Proficiency in RTL design (Verilog/SystemVerilog), modeling (MATLAB, SystemC), and simulation. Strong communication and documentation skills. Preferred Qualifications Experience with tactile sensing systems, haptics, or robotic feedback loops. Experience with Vision Processing Units architecture Familiarity with motion control systems, servo drives, and robotics. Familiarity with federated learning platforms (e.g., TensorFlow Federated, PySyft). Experience with system-level modeling and verification methodologies. Exposure to high-volume IC productization and manufacturing. Experience with safety and cybersecurity certification processes and tools. Why Join Us? This is a rare opportunity to shape the future of industrial automation and robotics through advanced SoC design. You'll work with a passionate, multidisciplinary team on impactful technologies that bridge the physical and digital worlds. Our mission is to enable intelligent, safe, and connected industrial systems-and we're looking for architects who share that vision. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law . Job Req Type: Experienced Required Travel: Yes, 10% of the time Shift Type: 1st Shift/Days The expected wage range for a new hire into this position is $184,030 to $266,485. Actual wage offered may vary depending on work location , experience, education, training, external market data, internal pay equity, or other bona fide factors. This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.
This Jobot Consulting Job is hosted by: Tyler May Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $28 per hour A bit about us: Our client is an established designer and manufacturer of advanced electronic packaging and integrated systems that support mission-critical applications in defense, aerospace, communications, and other high-reliability markets. This company partners closely with OEMs and government agencies to engineer complex, build-to-print and build-to-spec solutions that perform in demanding environments, from laboratory prototypes to full production programs. With vertically integrated machining, assembly, and test capabilities under one roof, our client leverages modern CNC equipment, CAD/CAM tools, and lean manufacturing practices to deliver precision-machined components and housings with tight tolerances and consistent quality. Cross-functional engineering, manufacturing, and quality teams work side-by-side, giving CNC programmers direct access to design input and real-time feedback from the shop floor. Why join us? This company offers CNC programmers the opportunity to work on complex parts, small to medium runs, and challenging materials that directly support national defense, aerospace, and cutting-edge technology programs. You will see the full lifecycle of your work, from interpreting customer drawings and models through programming and machining to final inspection and shipment. Our client invests in modern CNC mills and lathes, CAD/CAM software, and continuous training, giving you room to deepen your expertise in multi-axis machining, tooling strategies, and process optimization. The culture emphasizes collaboration, problem-solving, and craftsmanship, so programmers work closely with machinists, engineers, and quality technicians to refine processes and improve throughput while maintaining high quality standards. Benefits typically include competitive pay, medical and retirement plans, paid time off, and opportunities for advancement into senior programming, process engineering, or technical leadership roles as the business grows Job Details Key responsibilities: Create, modify, and optimize CNC programs for mills and lathes using CAM software (such as Mastercam, Fusion 360, or similar) based on 2D drawings and 3D models. Read and interpret complex engineering blueprints, models, and work instructions, including GD&T, material specifications, and finish requirements. Determine machining strategies, select appropriate tooling and work-holding, and define speeds, feeds, and depths of cut for a variety of metals and alloys (e.g., aluminum, stainless, copper, exotic alloys). Work with machinists to prove out new programs, perform first-article runs, and adjust code or process parameters to achieve quality and cycle-time targets. Troubleshoot machining and programming issues, including tool wear, chatter, collisions, dimensional non-conformances, and surface finish problems. Support setup documentation by generating tool lists, setup sheets, and program notes that enable efficient, repeatable production. Perform or support in-process checks using calipers, micrometers, height gauges, and other precision measuring equipment to verify conformance to specifications. Collaborate with engineering and quality to review manufacturability, suggest design or tolerance improvements, and participate in corrective actions when needed. Maintain organized program files, tooling libraries, and revision control in accordance with company and customer requirements. Qualifications: Prior experience as a CNC programmer in a precision machining environment, ideally supporting aerospace, defense, electronics, or other high-reliability applications. Strong knowledge of G-code and M-code, multi-axis CNC machining principles, and common work coordinate systems. Proficiency with at least one major CAD/CAM platform (e.g., Mastercam, Fusion 360, SolidCAM, Powermill, or similar) and familiarity with reading CAD models. Solid understanding of machining fundamentals, including tool selection, cutting parameters, chip control, heat management, and fixturing methods. Ability to interpret GD&T and apply it to programming and inspection plans. Comfortable working with tight tolerances and inspection techniques required for precision parts. Strong math skills, including trigonometry and geometry, used for calculating tool paths, offsets, and features. Effective communication and collaboration skills, with a focus on working closely with machinists, engineers, and quality teams. Preferred: Experience with multi-axis (4- or 5-axis) machining, probing cycles, and high-speed machining strategies. Background in a regulated or certified environment (e.g., ISO 9001, AS9100, or similar). Familiarity with continuous improvement, lean manufacturing, or similar process-improvement methodologie Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/14/2026
Full time
This Jobot Consulting Job is hosted by: Tyler May Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $28 per hour A bit about us: Our client is an established designer and manufacturer of advanced electronic packaging and integrated systems that support mission-critical applications in defense, aerospace, communications, and other high-reliability markets. This company partners closely with OEMs and government agencies to engineer complex, build-to-print and build-to-spec solutions that perform in demanding environments, from laboratory prototypes to full production programs. With vertically integrated machining, assembly, and test capabilities under one roof, our client leverages modern CNC equipment, CAD/CAM tools, and lean manufacturing practices to deliver precision-machined components and housings with tight tolerances and consistent quality. Cross-functional engineering, manufacturing, and quality teams work side-by-side, giving CNC programmers direct access to design input and real-time feedback from the shop floor. Why join us? This company offers CNC programmers the opportunity to work on complex parts, small to medium runs, and challenging materials that directly support national defense, aerospace, and cutting-edge technology programs. You will see the full lifecycle of your work, from interpreting customer drawings and models through programming and machining to final inspection and shipment. Our client invests in modern CNC mills and lathes, CAD/CAM software, and continuous training, giving you room to deepen your expertise in multi-axis machining, tooling strategies, and process optimization. The culture emphasizes collaboration, problem-solving, and craftsmanship, so programmers work closely with machinists, engineers, and quality technicians to refine processes and improve throughput while maintaining high quality standards. Benefits typically include competitive pay, medical and retirement plans, paid time off, and opportunities for advancement into senior programming, process engineering, or technical leadership roles as the business grows Job Details Key responsibilities: Create, modify, and optimize CNC programs for mills and lathes using CAM software (such as Mastercam, Fusion 360, or similar) based on 2D drawings and 3D models. Read and interpret complex engineering blueprints, models, and work instructions, including GD&T, material specifications, and finish requirements. Determine machining strategies, select appropriate tooling and work-holding, and define speeds, feeds, and depths of cut for a variety of metals and alloys (e.g., aluminum, stainless, copper, exotic alloys). Work with machinists to prove out new programs, perform first-article runs, and adjust code or process parameters to achieve quality and cycle-time targets. Troubleshoot machining and programming issues, including tool wear, chatter, collisions, dimensional non-conformances, and surface finish problems. Support setup documentation by generating tool lists, setup sheets, and program notes that enable efficient, repeatable production. Perform or support in-process checks using calipers, micrometers, height gauges, and other precision measuring equipment to verify conformance to specifications. Collaborate with engineering and quality to review manufacturability, suggest design or tolerance improvements, and participate in corrective actions when needed. Maintain organized program files, tooling libraries, and revision control in accordance with company and customer requirements. Qualifications: Prior experience as a CNC programmer in a precision machining environment, ideally supporting aerospace, defense, electronics, or other high-reliability applications. Strong knowledge of G-code and M-code, multi-axis CNC machining principles, and common work coordinate systems. Proficiency with at least one major CAD/CAM platform (e.g., Mastercam, Fusion 360, SolidCAM, Powermill, or similar) and familiarity with reading CAD models. Solid understanding of machining fundamentals, including tool selection, cutting parameters, chip control, heat management, and fixturing methods. Ability to interpret GD&T and apply it to programming and inspection plans. Comfortable working with tight tolerances and inspection techniques required for precision parts. Strong math skills, including trigonometry and geometry, used for calculating tool paths, offsets, and features. Effective communication and collaboration skills, with a focus on working closely with machinists, engineers, and quality teams. Preferred: Experience with multi-axis (4- or 5-axis) machining, probing cycles, and high-speed machining strategies. Background in a regulated or certified environment (e.g., ISO 9001, AS9100, or similar). Familiarity with continuous improvement, lean manufacturing, or similar process-improvement methodologie Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
An applications engineer is responsible for assessing the costs and resources required for a project or service. They analyze project specifications, review drawings and data sheets, and collaborate with various stakeholders to determine material, labor, and equipment needs. Estimators also research market prices, obtain quotes from suppliers and subcontractors, and prepare detailed cost estimates and proposals. Their role is crucial in ensuring accurate budgeting and pricing for projects in construction, manufacturing, engineering, and other industries. Reports to Technical Sales Manager of PAD AS A PAD SENIOR AUTOMATION APPLICATIONS ENGINEER YOU WILL: Core Responsibilities Become proficient in PAD solutions and offerings. Responsible for the technical review and understanding of the customers' requirements in their requests for proposals including system designs, single line drawings, site layouts, containerization, performance guarantees, availability guarantees, etc. Interact with other Powell divisions to develop cross-business solutions. Analyze and utilize data for in-depth evaluation of current market conditions and trends to help drive the current and future automation solution offerings. Contribute to new and existing product specifications. Drive the growth of automation by helping to build and maintain long lasting relationships, inspire trust, enhancing client experience, and being a thorough leader with innovative automation solutions to meet customer needs. Assist in developing formal internal proposals including technical budget estimates and cost justification models for product line enhancements and/or cost out projects. Become a SME in the automation space by understanding and developing solutions utilizing products from various manufactures such as SEL, Rockwell, Siemens, and GE. Ensure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services. Independently review customer supplied specifications to assess feasibility of Powell manufacture or supply. Read and interpret electrical drawings to include single-lines, three-lines, elevations, control schematics, site plans and electrical enclosure layouts. Read and interpret network topology drawings. Generate accurate proposals based on the review and interpretation of customer-supplied documentation. Recognize and effectively communicate application concerns prior to development of proposal. Translate conceptual customer designs into a meaningful proposal. Optimize the proposed solution to best benefit of Powell and our customers. Write effective comments to help define Powell's offering. Act as technical resource for Powell Sales Assist Powell Sales with internal and external technical discussions and solutions. Perform competitive evaluation of sub vendor proposals used to complete the overall Powell offering. Assess risk associated with sub-vendor offering. Requires minimal supervision. May be selected to lead a project requiring contribution from multiple Application Engineers Support generating new sales opportunities by providing technical support/guidance to PAD and other organizational sales teams for customer meetings and company automation initiatives. It will also be necessary to participate in (some instances lead) presentations, networking activities, and events to promote automation. Secondary Responsibilities (performed but not regularly): Participate in sales and marketing activities to include client meetings and conferences. Participate in executing cost out initiatives in conjunction with Engineering and Operations. Perform analytical or competitive market studies as required. Contribute to new and existing product specifications. Key Functions Prepare detailed, accurate and cost competitive proposals - 90% Participate in external customer facing activities - 10% Minimum Qualifications B.S. in Electrical Engineering or relevant discipline 4+ years of experience in electrical equipment estimating, or related field. Skills, Abilities & Other Requirements Able to review and interpret client provided documents such as specifications, drawings and data sheets. Strong analytical skills is required Basic understanding in at least two of the following is preferred: Networking and Cybersecurity RTUs, HMIs, and SCADA Systems for Automation and Control systems Protective Relay programming and commissioning PLC applications for Switchgear Experience with Microsoft Office Suite required. Experience with ERP system Oracle; previous experience utilizing Projects-related software (i.e. - Primavera, Microsoft Projects, Excel and Oracle) is plus. Will consider candidates that are open to learn these and other software programs. Previous experience developing, executing, integrating, troubleshooting, and/or commissioning projects related to relay, PLC, HMI, RTU, or control systems for power applications is preferred. Experience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc. and networking is a plus. Knowledge of 3 phase power is preferred. Excellent customer relation, verbal, and written communication skills Ability to communicate clearly and professionally with all levels of an organization. Desire to stay up to date on current industry trends and technology to improve PAD solutions/offerings. In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.
03/13/2026
Full time
An applications engineer is responsible for assessing the costs and resources required for a project or service. They analyze project specifications, review drawings and data sheets, and collaborate with various stakeholders to determine material, labor, and equipment needs. Estimators also research market prices, obtain quotes from suppliers and subcontractors, and prepare detailed cost estimates and proposals. Their role is crucial in ensuring accurate budgeting and pricing for projects in construction, manufacturing, engineering, and other industries. Reports to Technical Sales Manager of PAD AS A PAD SENIOR AUTOMATION APPLICATIONS ENGINEER YOU WILL: Core Responsibilities Become proficient in PAD solutions and offerings. Responsible for the technical review and understanding of the customers' requirements in their requests for proposals including system designs, single line drawings, site layouts, containerization, performance guarantees, availability guarantees, etc. Interact with other Powell divisions to develop cross-business solutions. Analyze and utilize data for in-depth evaluation of current market conditions and trends to help drive the current and future automation solution offerings. Contribute to new and existing product specifications. Drive the growth of automation by helping to build and maintain long lasting relationships, inspire trust, enhancing client experience, and being a thorough leader with innovative automation solutions to meet customer needs. Assist in developing formal internal proposals including technical budget estimates and cost justification models for product line enhancements and/or cost out projects. Become a SME in the automation space by understanding and developing solutions utilizing products from various manufactures such as SEL, Rockwell, Siemens, and GE. Ensure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services. Independently review customer supplied specifications to assess feasibility of Powell manufacture or supply. Read and interpret electrical drawings to include single-lines, three-lines, elevations, control schematics, site plans and electrical enclosure layouts. Read and interpret network topology drawings. Generate accurate proposals based on the review and interpretation of customer-supplied documentation. Recognize and effectively communicate application concerns prior to development of proposal. Translate conceptual customer designs into a meaningful proposal. Optimize the proposed solution to best benefit of Powell and our customers. Write effective comments to help define Powell's offering. Act as technical resource for Powell Sales Assist Powell Sales with internal and external technical discussions and solutions. Perform competitive evaluation of sub vendor proposals used to complete the overall Powell offering. Assess risk associated with sub-vendor offering. Requires minimal supervision. May be selected to lead a project requiring contribution from multiple Application Engineers Support generating new sales opportunities by providing technical support/guidance to PAD and other organizational sales teams for customer meetings and company automation initiatives. It will also be necessary to participate in (some instances lead) presentations, networking activities, and events to promote automation. Secondary Responsibilities (performed but not regularly): Participate in sales and marketing activities to include client meetings and conferences. Participate in executing cost out initiatives in conjunction with Engineering and Operations. Perform analytical or competitive market studies as required. Contribute to new and existing product specifications. Key Functions Prepare detailed, accurate and cost competitive proposals - 90% Participate in external customer facing activities - 10% Minimum Qualifications B.S. in Electrical Engineering or relevant discipline 4+ years of experience in electrical equipment estimating, or related field. Skills, Abilities & Other Requirements Able to review and interpret client provided documents such as specifications, drawings and data sheets. Strong analytical skills is required Basic understanding in at least two of the following is preferred: Networking and Cybersecurity RTUs, HMIs, and SCADA Systems for Automation and Control systems Protective Relay programming and commissioning PLC applications for Switchgear Experience with Microsoft Office Suite required. Experience with ERP system Oracle; previous experience utilizing Projects-related software (i.e. - Primavera, Microsoft Projects, Excel and Oracle) is plus. Will consider candidates that are open to learn these and other software programs. Previous experience developing, executing, integrating, troubleshooting, and/or commissioning projects related to relay, PLC, HMI, RTU, or control systems for power applications is preferred. Experience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc. and networking is a plus. Knowledge of 3 phase power is preferred. Excellent customer relation, verbal, and written communication skills Ability to communicate clearly and professionally with all levels of an organization. Desire to stay up to date on current industry trends and technology to improve PAD solutions/offerings. In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.
Food manufacturer in Upstate NY hiring a seasoned Accountant to join their team! This Jobot Job is hosted by: Christine McNamara Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $100,000 per year A bit about us: We are seeking a highly skilled and experienced Senior Accountant to join our dynamic manufacturing team. This is a permanent role that offers the opportunity to make a significant impact on our financial operations. As an integral member of our team, you will be responsible for managing and overseeing various aspects of our financial operations, including financial statement preparation, monthly reporting, and month-end close procedures. Why join us? Medical, Dental, & Vision insurance 401k with company match Generous PTO & sick leave and much more! Job Details Responsibilities: 1. Oversee the preparation and analysis of monthly, quarterly, and annual financial statements in accordance with GAAP. 2. Perform month-end close procedures, including account reconciliations, journal entries, and variance analysis. 3. Prepare and present monthly financial reports to senior management, providing insights and recommendations based on financial data. 4. Ensure compliance with all internal controls and policies, as well as external regulations. 5. Collaborate with other departments to streamline processes, improve operational efficiency, and achieve company objectives. 6. Utilize SAP software to manage and analyze financial data. 7. Provide financial support and guidance to the manufacturing team, particularly in relation to cost management and profitability analysis. 8. Participate in special projects and ad-hoc financial analyses as required. Qualifications: 1. Bachelor's degree in Accounting, Finance, or related field. 2. Certified Public Accountant (CPA) designation is preferred. 3. Minimum of 5 years of experience in a senior accounting role, preferably within the manufacturing industry. Experience in the food manufacturing sector is a plus. 4. Proficient in SAP or similar ERP systems. 5. In-depth knowledge of GAAP and other relevant financial regulations and standards. 6. Strong analytical skills and attention to detail. 7. Excellent communication and presentation skills. 8. Ability to work independently and as part of a team. 9. Proven ability to manage multiple tasks and meet tight deadlines. 10. Strong problem-solving skills and the ability to make sound decisions based on financial data. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/13/2026
Full time
Food manufacturer in Upstate NY hiring a seasoned Accountant to join their team! This Jobot Job is hosted by: Christine McNamara Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $100,000 per year A bit about us: We are seeking a highly skilled and experienced Senior Accountant to join our dynamic manufacturing team. This is a permanent role that offers the opportunity to make a significant impact on our financial operations. As an integral member of our team, you will be responsible for managing and overseeing various aspects of our financial operations, including financial statement preparation, monthly reporting, and month-end close procedures. Why join us? Medical, Dental, & Vision insurance 401k with company match Generous PTO & sick leave and much more! Job Details Responsibilities: 1. Oversee the preparation and analysis of monthly, quarterly, and annual financial statements in accordance with GAAP. 2. Perform month-end close procedures, including account reconciliations, journal entries, and variance analysis. 3. Prepare and present monthly financial reports to senior management, providing insights and recommendations based on financial data. 4. Ensure compliance with all internal controls and policies, as well as external regulations. 5. Collaborate with other departments to streamline processes, improve operational efficiency, and achieve company objectives. 6. Utilize SAP software to manage and analyze financial data. 7. Provide financial support and guidance to the manufacturing team, particularly in relation to cost management and profitability analysis. 8. Participate in special projects and ad-hoc financial analyses as required. Qualifications: 1. Bachelor's degree in Accounting, Finance, or related field. 2. Certified Public Accountant (CPA) designation is preferred. 3. Minimum of 5 years of experience in a senior accounting role, preferably within the manufacturing industry. Experience in the food manufacturing sector is a plus. 4. Proficient in SAP or similar ERP systems. 5. In-depth knowledge of GAAP and other relevant financial regulations and standards. 6. Strong analytical skills and attention to detail. 7. Excellent communication and presentation skills. 8. Ability to work independently and as part of a team. 9. Proven ability to manage multiple tasks and meet tight deadlines. 10. Strong problem-solving skills and the ability to make sound decisions based on financial data. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Excellent Benefits/ Growing Company/ This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $165,000 per year A bit about us: Jobot is actively seeking an experienced Senior Mechanical Engineer on behalf of a leading Power Utility organization. This position plays a critical role in the design, analysis, and maintenance of mechanical systems that support power generation, transmission, and utility infrastructure. The ideal candidate will bring deep technical knowledge, leadership skills, and a passion for innovation in the utility sector. Why join us? Medical Dental Vision 401k Match Parental Leave Educational Assistance Annual Performance Bonus PTO, and Volunteer Time Off Job Details Job Details: We are currently seeking a highly skilled and motivated Senior Mechanical Engineer with power utility experience to join our dynamic team. This is a permanent position that offers the unique opportunity to work in the exciting intersection of energy industry. The successful candidate will be an integral part of our team, contributing to the design, analysis, and maintenance of mechanical systems in hydroelectric plants. This role is perfect for a self-starter with a strong background in Solidworks, AutoCAD, and a Bachelor's degree in engineering. Responsibilities: As a Senior Mechanical Engineer, your responsibilities will include: 1. Designing, analyzing, and maintaining mechanical systems in hydroelectric plants in accordance with industry standards and best practices. 2. Utilizing software tools such as Solidworks and AutoCAD to create detailed 3D models and designs for mechanical equipment. 3. Collaborating with cross-functional teams to identify and implement innovative solutions for complex mechanical engineering problems. 4. Providing technical leadership and mentoring to junior engineers, fostering a culture of continuous learning and improvement. 5. Conducting reliability analysis and risk assessments of mechanical systems to ensure optimal performance and safety. 6. Participating in project planning and management, including cost estimation, budgeting, and scheduling. 7. Ensuring compliance with all relevant regulations and standards, including environmental and safety regulations. Qualifications: To be considered for the Senior Mechanical Engineer position, you must have the following qualifications: 1. Bachelor's degree in Mechanical Engineering or a related field. 2. Minimum of 8 years of experience in mechanical engineering, preferably in the power utility sector. 3. Proficiency in Solidworks and AutoCAD or equivalent CAD software. 4. Demonstrated experience in the design, analysis, and maintenance of mechanical systems in hydroelectric plants. 5. Strong understanding of mechanical engineering principles, materials, and manufacturing processes. 6. Excellent problem-solving skills and the ability to think critically and creatively. 7. Strong communication and interpersonal skills, with the ability to work effectively in a team environment. 8. Ability to manage multiple projects and priorities in a fast-paced, deadline-driven environment. 9. Professional Engineering (PE) license is preferred. Join our team and use your skills and expertise to make a real impact in the accounting and finance industry. This is a fantastic opportunity for a dedicated professional looking to take the next step in their career. We can't wait to see what you will accomplish as our Senior Mechanical Engineer. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/13/2026
Full time
Excellent Benefits/ Growing Company/ This Jobot Job is hosted by: Billy Mewton Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $130,000 - $165,000 per year A bit about us: Jobot is actively seeking an experienced Senior Mechanical Engineer on behalf of a leading Power Utility organization. This position plays a critical role in the design, analysis, and maintenance of mechanical systems that support power generation, transmission, and utility infrastructure. The ideal candidate will bring deep technical knowledge, leadership skills, and a passion for innovation in the utility sector. Why join us? Medical Dental Vision 401k Match Parental Leave Educational Assistance Annual Performance Bonus PTO, and Volunteer Time Off Job Details Job Details: We are currently seeking a highly skilled and motivated Senior Mechanical Engineer with power utility experience to join our dynamic team. This is a permanent position that offers the unique opportunity to work in the exciting intersection of energy industry. The successful candidate will be an integral part of our team, contributing to the design, analysis, and maintenance of mechanical systems in hydroelectric plants. This role is perfect for a self-starter with a strong background in Solidworks, AutoCAD, and a Bachelor's degree in engineering. Responsibilities: As a Senior Mechanical Engineer, your responsibilities will include: 1. Designing, analyzing, and maintaining mechanical systems in hydroelectric plants in accordance with industry standards and best practices. 2. Utilizing software tools such as Solidworks and AutoCAD to create detailed 3D models and designs for mechanical equipment. 3. Collaborating with cross-functional teams to identify and implement innovative solutions for complex mechanical engineering problems. 4. Providing technical leadership and mentoring to junior engineers, fostering a culture of continuous learning and improvement. 5. Conducting reliability analysis and risk assessments of mechanical systems to ensure optimal performance and safety. 6. Participating in project planning and management, including cost estimation, budgeting, and scheduling. 7. Ensuring compliance with all relevant regulations and standards, including environmental and safety regulations. Qualifications: To be considered for the Senior Mechanical Engineer position, you must have the following qualifications: 1. Bachelor's degree in Mechanical Engineering or a related field. 2. Minimum of 8 years of experience in mechanical engineering, preferably in the power utility sector. 3. Proficiency in Solidworks and AutoCAD or equivalent CAD software. 4. Demonstrated experience in the design, analysis, and maintenance of mechanical systems in hydroelectric plants. 5. Strong understanding of mechanical engineering principles, materials, and manufacturing processes. 6. Excellent problem-solving skills and the ability to think critically and creatively. 7. Strong communication and interpersonal skills, with the ability to work effectively in a team environment. 8. Ability to manage multiple projects and priorities in a fast-paced, deadline-driven environment. 9. Professional Engineering (PE) license is preferred. Join our team and use your skills and expertise to make a real impact in the accounting and finance industry. This is a fantastic opportunity for a dedicated professional looking to take the next step in their career. We can't wait to see what you will accomplish as our Senior Mechanical Engineer. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Precision meets innovation! Join a top aerospace manufacturer as a CNC Programmer in sunny Santa Ana. This Jobot Job is hosted by: Kelly Breen Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $45 per hour A bit about us: We are a precision manufacturer serving the aerospace, defense, and industrial sectors, known for our advanced CNC machining, tight-tolerance capabilities, and AS9100-certified operations. Our team thrives on technical excellence, teamwork, and continuous improvement-delivering quality parts that move industries forward. Why join us? Work in a modern, climate-controlled AS9100-certified facility Gain hands-on experience with Mori Seki, Okuma, and DN Solutions CNC machines Be part of a highly skilled, collaborative manufacturing team Access training and development opportunities through NTMA and in-house programs Competitive compensation and full benefits package Job Details Job Details: Are you a seasoned CNC Programmer ready to take your career to the next level? Our company is seeking a highly skilled and motivated CNC Senior Programmer to join our dynamic team. As a leader in the engineering industry, we pride ourselves on leveraging the latest technology to develop innovative solutions for our clients. The CNC Senior Programmer will play a critical role in our operations, leading the design and execution of complex machining projects. This is a permanent, full-time position, offering a competitive salary and benefits package. Responsibilities: As a CNC Senior Programmer, you will be responsible for a wide range of tasks that are crucial to our operations. Your core responsibilities will include: 1. Developing and optimizing CNC programs for lathes and mills using CAD/CAM software. 2. Working closely with the production team to ensure the smooth operation of machining processes. 3. Collaborating with the engineering team to design and develop fixtures and tooling for new projects. 4. Providing technical support and training to junior programmers and machinists. 5. Ensuring all machining processes comply with safety regulations and quality standards. 6. Troubleshooting and resolving issues related to CNC programming and machining. 7. Keeping up-to-date with the latest advancements in CNC programming and machining technology. Qualifications: To be considered for the CNC Senior Programmer position, candidates must meet the following qualifications: 1. A minimum of 5 years of experience as a CNC Programmer in the engineering industry. 2. Proficiency in programming and operating CNC lathes and mills. 3. Extensive knowledge of machining processes and GD&T (Geometric Dimensioning and Tolerancing). 4. The ability to read and interpret complex engineering drawings and blueprints. 5. Strong problem-solving skills and the ability to troubleshoot technical issues. 6. Excellent communication and leadership skills. 7. A strong commitment to safety, quality, and continuous improvement. 8. A degree in mechanical engineering, manufacturing engineering, or a related field is preferred. If you are a highly skilled CNC Programmer with a passion for innovation and a commitment to excellence, we would love to hear from you. Apply today and take the next step in your career. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/13/2026
Full time
Precision meets innovation! Join a top aerospace manufacturer as a CNC Programmer in sunny Santa Ana. This Jobot Job is hosted by: Kelly Breen Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $45 per hour A bit about us: We are a precision manufacturer serving the aerospace, defense, and industrial sectors, known for our advanced CNC machining, tight-tolerance capabilities, and AS9100-certified operations. Our team thrives on technical excellence, teamwork, and continuous improvement-delivering quality parts that move industries forward. Why join us? Work in a modern, climate-controlled AS9100-certified facility Gain hands-on experience with Mori Seki, Okuma, and DN Solutions CNC machines Be part of a highly skilled, collaborative manufacturing team Access training and development opportunities through NTMA and in-house programs Competitive compensation and full benefits package Job Details Job Details: Are you a seasoned CNC Programmer ready to take your career to the next level? Our company is seeking a highly skilled and motivated CNC Senior Programmer to join our dynamic team. As a leader in the engineering industry, we pride ourselves on leveraging the latest technology to develop innovative solutions for our clients. The CNC Senior Programmer will play a critical role in our operations, leading the design and execution of complex machining projects. This is a permanent, full-time position, offering a competitive salary and benefits package. Responsibilities: As a CNC Senior Programmer, you will be responsible for a wide range of tasks that are crucial to our operations. Your core responsibilities will include: 1. Developing and optimizing CNC programs for lathes and mills using CAD/CAM software. 2. Working closely with the production team to ensure the smooth operation of machining processes. 3. Collaborating with the engineering team to design and develop fixtures and tooling for new projects. 4. Providing technical support and training to junior programmers and machinists. 5. Ensuring all machining processes comply with safety regulations and quality standards. 6. Troubleshooting and resolving issues related to CNC programming and machining. 7. Keeping up-to-date with the latest advancements in CNC programming and machining technology. Qualifications: To be considered for the CNC Senior Programmer position, candidates must meet the following qualifications: 1. A minimum of 5 years of experience as a CNC Programmer in the engineering industry. 2. Proficiency in programming and operating CNC lathes and mills. 3. Extensive knowledge of machining processes and GD&T (Geometric Dimensioning and Tolerancing). 4. The ability to read and interpret complex engineering drawings and blueprints. 5. Strong problem-solving skills and the ability to troubleshoot technical issues. 6. Excellent communication and leadership skills. 7. A strong commitment to safety, quality, and continuous improvement. 8. A degree in mechanical engineering, manufacturing engineering, or a related field is preferred. If you are a highly skilled CNC Programmer with a passion for innovation and a commitment to excellence, we would love to hear from you. Apply today and take the next step in your career. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% ONSITE in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership Actively identify test readiness issues and optimizations throughout the development lifecycle Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of five (5) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Minimum 5 years of related experience excluding internships Experience leading technical tasks and small to mid-sized project teams Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
03/11/2026
Full time
Date Posted: 2025-12-11 Country: United States of America Location: MA132: Tewksbury, Ma Bldg 2 Sudbury 50 Apple Hill Drive Sudbury - Building 2, Tewksbury, MA, 01876 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures. You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing. Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment. This role is 100% onsite in Tewksbury, MA What You Will Do Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital) Actively identify test readiness issues and optimizations throughout the development lifecycle. Understand and meet established project budget, schedule, and performance commitments Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers. Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision Engage in personal technical growth Prepare and clearly present your work product at project status meetings Support Manufacturing operations, including on-site troubleshooting and debugging Qualifications You Must Have Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) Minimum of two (2) years of relevant engineering experience Experience in electrical engineering design and/or software automation concepts and applications US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts Experience with decision-making and problem-solving skills Experience working as a member of a team Experience with National Instruments' TestStand, LabWindows/CVI, and/or LabVIEW Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Raytheon will sponsor clearance. Interim Secret Clearance required prior to start. This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Incredibly opportunity to work directly with the C-Suite at a massive public communications enterprise to build and implement AI solutions internally! This Jobot Job is hosted by: Craig Rosecrans Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $140,000 - $220,000 per year A bit about us: Are you passionate about AI, machine learning, and software engineering? Do you have a knack for developing prototypes that could potentially revolutionize the tech services industry? If so, we have an exciting opportunity for you! We are seeking a Senior AI Software Engineer to join our dynamic team. The ideal candidate will have a strong background in machine learning, software engineering, MLOps, AWS, API, and prototype development. With your skills, you will be instrumental in pushing the boundaries of what's possible in our industry. Why join us? Competitive Base Salary Company paid health plan for employees Flexible Hours Very generous PTO Dental and Vision, FSA, HSA Small team, autonomy Many more great perks! Job Details Responsibilities: As a Senior AI Software Engineer, you will be responsible for: 1. Developing and maintaining robust AI and machine learning models to solve complex problems in the tech services industry. 2. Designing, building, and deploying effective software solutions in line with our company's goals and objectives. 3. Leading in the creation and development of innovative prototypes that can be tested and scaled in real-world scenarios. 4. Utilizing your extensive knowledge of AWS and APIs to enhance our products and services. 5. Collaborating with cross-functional teams to ensure our software solutions are of the highest quality and meet customer expectations. 6. Implementing MLOps practices to automate and improve the efficiency of our machine learning lifecycle. 7. Keeping up-to-date with the latest industry trends and technologies in AI, machine learning, and software engineering to continuously improve our products and services. 8. Providing technical leadership and mentoring to junior team members. Qualifications: To be considered for the Permanent Senior AI Software Engineer role, you must have: 1. A bachelor's degree in Computer Science, Engineering, or a related field. A master's degree or Ph.D. is highly desirable. 2. A minimum of 5 years of experience in software engineering, with a focus on AI and machine learning. 3. Proven experience in prototype development and testing. 4. Extensive knowledge of MLOps practices and techniques. 5. Proficiency in AWS and API integration. 6. Strong programming skills in Python, Java, C++, or other relevant languages. 7. Exceptional problem-solving skills and a keen eye for detail. 8. Excellent communication and teamwork skills. 9. A passion for staying up-to-date with the latest advancements in AI, machine learning, and software engineering. If you are a driven, innovative, and experienced professional who is ready to take on new challenges, we would love to hear from you. Join us and be part of a team that is shaping the future of the tech services industry! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/10/2026
Full time
Incredibly opportunity to work directly with the C-Suite at a massive public communications enterprise to build and implement AI solutions internally! This Jobot Job is hosted by: Craig Rosecrans Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $140,000 - $220,000 per year A bit about us: Are you passionate about AI, machine learning, and software engineering? Do you have a knack for developing prototypes that could potentially revolutionize the tech services industry? If so, we have an exciting opportunity for you! We are seeking a Senior AI Software Engineer to join our dynamic team. The ideal candidate will have a strong background in machine learning, software engineering, MLOps, AWS, API, and prototype development. With your skills, you will be instrumental in pushing the boundaries of what's possible in our industry. Why join us? Competitive Base Salary Company paid health plan for employees Flexible Hours Very generous PTO Dental and Vision, FSA, HSA Small team, autonomy Many more great perks! Job Details Responsibilities: As a Senior AI Software Engineer, you will be responsible for: 1. Developing and maintaining robust AI and machine learning models to solve complex problems in the tech services industry. 2. Designing, building, and deploying effective software solutions in line with our company's goals and objectives. 3. Leading in the creation and development of innovative prototypes that can be tested and scaled in real-world scenarios. 4. Utilizing your extensive knowledge of AWS and APIs to enhance our products and services. 5. Collaborating with cross-functional teams to ensure our software solutions are of the highest quality and meet customer expectations. 6. Implementing MLOps practices to automate and improve the efficiency of our machine learning lifecycle. 7. Keeping up-to-date with the latest industry trends and technologies in AI, machine learning, and software engineering to continuously improve our products and services. 8. Providing technical leadership and mentoring to junior team members. Qualifications: To be considered for the Permanent Senior AI Software Engineer role, you must have: 1. A bachelor's degree in Computer Science, Engineering, or a related field. A master's degree or Ph.D. is highly desirable. 2. A minimum of 5 years of experience in software engineering, with a focus on AI and machine learning. 3. Proven experience in prototype development and testing. 4. Extensive knowledge of MLOps practices and techniques. 5. Proficiency in AWS and API integration. 6. Strong programming skills in Python, Java, C++, or other relevant languages. 7. Exceptional problem-solving skills and a keen eye for detail. 8. Excellent communication and teamwork skills. 9. A passion for staying up-to-date with the latest advancements in AI, machine learning, and software engineering. If you are a driven, innovative, and experienced professional who is ready to take on new challenges, we would love to hear from you. Join us and be part of a team that is shaping the future of the tech services industry! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
This Jobot Job is hosted by: Christina Finster Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $145,000 - $185,000 per year A bit about us: Our client was founded with the intention of delivering on the promise of what Internet-of-Things (IoT) was supposed to be. They're building a global Bluetooth network dedicated to machine-to-machine connectivity. Our client is an early-stage, venture-backed startup supported by some of the best investors in the world. Why join us? COMPENSATION & BENEFITS Salary: $145,000.00 - $185,000.00 (commensurate with experience) Comprehensive Benefits - Health, Dental, Vision, & HSA options Unlimited PTO Commuter Benefits (if working from HQ) Learning & Development Allowance Health & Wellness Stipend Sabbatical Program - Recharge and explore new ideas Cutting-Edge Space Tech - Work on state-of-the-art satellite system Job Details As a Senior Hardware Test Engineer, you'll play a critical role in ensuring the reliability, performance, and longevity of our satellite hardware. You'll own the development and execution of comprehensive test strategies that validate our wireless payloads, uncover weaknesses, and optimize system durability. Your work will span the full lifecycle - from design validation to flight readiness - and will be instrumental in proving that our payloads can thrive in the harshest environments space has to offer, including radiation, thermal cycling, and mechanical stress. In this role, you'll: Build and execute rigorous test protocols for RF and mixed-signal hardware. Analyze test data to identify failure modes, drive root-cause investigations, and feed improvements back into design. Develop methods to optimize system resilience under space conditions. Lead continuous improvement in test methodology, automation, and best practices. Provide technical mentorship and help raise the bar for test engineering at Hubble. Collaborate closely with cross-functional teams - hardware, software, and mechanical - to ensure reliability from initial design through manufacturing and in-orbit operation. This is a full-time position based in Seattle, WA. AN IDEAL CANDIDATE HAS A Sense of Urgency: Lead projects from concept to reality, rapidly and effectively First Principles Engineering: Have a strong understanding of the whys behind the whats; have the ability to extrapolate from first principles to complex system design High Learning Agility: Love to learn; have a grounded approach to recognizing your weaknesses and take the initiative to brush up on and sharpen your engineering foundations to better collaborate with your teammates with different backgrounds System-Level Design and Analysis: Understand the requirements flow down process and be able to quickly iterate on evolving requirements Excellent Communication Skills: Effectively convey ideas and communicate technical topics with engineering, build staff, and operations; run self-directed design reviews and participate in reviews of parallel systems Anticipation of Needs: Identify problems, think creatively, and rapidly produce reliable and cost-effective solutions to meet the ever growing and changing needs of an early-stage company BASIC QUALIFICATIONS Bachelor's Degree in Electrical engineering, Aerospace engineering, Computer science or a related field. 7+ years of experience in hardware validation, test engineering, or RF systems testing. Experience in design, testing, and debugging of RF PCBAs coupled with a thorough understanding of electronics reliability and failure mechanisms. Experience with test equipment (such as oscilloscope, VNA, Spectrum Analyzer, and Signal Generator) and procedures for analysis, verification and validation of RF products. Strong expertise in programming languages (Python, C/C++) required for data analysis and test automation. Demonstrated ability to conduct root cause failure analysis and implement corrective actions with an emphasis on RF systems. Thorough understanding of metrology, sources of measurement error, and uncertainty analysis. Experience with environmental testing such as thermal, vibration, and TVAC. Demonstrated ability to work in a highly cross-functional role Ability to work independently. Strong interpersonal, verbal and written communication skills is a must. Ability and willingness to thrive in a fast-paced, rapidly changing work environment. Passion for creating state-of-the-art hardware systems STRONGLY DESIRED 5+ years of experience in reliability engineering, testing, or quality assurance, preferably within the aerospace or satellite industry. Experience in high volume manufacturing, assembling and testing of electronic components. Experience in analyzing impact of radiation on electronic components and strategies to mitigate impact of radiation on electronic systems. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/04/2026
Full time
This Jobot Job is hosted by: Christina Finster Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $145,000 - $185,000 per year A bit about us: Our client was founded with the intention of delivering on the promise of what Internet-of-Things (IoT) was supposed to be. They're building a global Bluetooth network dedicated to machine-to-machine connectivity. Our client is an early-stage, venture-backed startup supported by some of the best investors in the world. Why join us? COMPENSATION & BENEFITS Salary: $145,000.00 - $185,000.00 (commensurate with experience) Comprehensive Benefits - Health, Dental, Vision, & HSA options Unlimited PTO Commuter Benefits (if working from HQ) Learning & Development Allowance Health & Wellness Stipend Sabbatical Program - Recharge and explore new ideas Cutting-Edge Space Tech - Work on state-of-the-art satellite system Job Details As a Senior Hardware Test Engineer, you'll play a critical role in ensuring the reliability, performance, and longevity of our satellite hardware. You'll own the development and execution of comprehensive test strategies that validate our wireless payloads, uncover weaknesses, and optimize system durability. Your work will span the full lifecycle - from design validation to flight readiness - and will be instrumental in proving that our payloads can thrive in the harshest environments space has to offer, including radiation, thermal cycling, and mechanical stress. In this role, you'll: Build and execute rigorous test protocols for RF and mixed-signal hardware. Analyze test data to identify failure modes, drive root-cause investigations, and feed improvements back into design. Develop methods to optimize system resilience under space conditions. Lead continuous improvement in test methodology, automation, and best practices. Provide technical mentorship and help raise the bar for test engineering at Hubble. Collaborate closely with cross-functional teams - hardware, software, and mechanical - to ensure reliability from initial design through manufacturing and in-orbit operation. This is a full-time position based in Seattle, WA. AN IDEAL CANDIDATE HAS A Sense of Urgency: Lead projects from concept to reality, rapidly and effectively First Principles Engineering: Have a strong understanding of the whys behind the whats; have the ability to extrapolate from first principles to complex system design High Learning Agility: Love to learn; have a grounded approach to recognizing your weaknesses and take the initiative to brush up on and sharpen your engineering foundations to better collaborate with your teammates with different backgrounds System-Level Design and Analysis: Understand the requirements flow down process and be able to quickly iterate on evolving requirements Excellent Communication Skills: Effectively convey ideas and communicate technical topics with engineering, build staff, and operations; run self-directed design reviews and participate in reviews of parallel systems Anticipation of Needs: Identify problems, think creatively, and rapidly produce reliable and cost-effective solutions to meet the ever growing and changing needs of an early-stage company BASIC QUALIFICATIONS Bachelor's Degree in Electrical engineering, Aerospace engineering, Computer science or a related field. 7+ years of experience in hardware validation, test engineering, or RF systems testing. Experience in design, testing, and debugging of RF PCBAs coupled with a thorough understanding of electronics reliability and failure mechanisms. Experience with test equipment (such as oscilloscope, VNA, Spectrum Analyzer, and Signal Generator) and procedures for analysis, verification and validation of RF products. Strong expertise in programming languages (Python, C/C++) required for data analysis and test automation. Demonstrated ability to conduct root cause failure analysis and implement corrective actions with an emphasis on RF systems. Thorough understanding of metrology, sources of measurement error, and uncertainty analysis. Experience with environmental testing such as thermal, vibration, and TVAC. Demonstrated ability to work in a highly cross-functional role Ability to work independently. Strong interpersonal, verbal and written communication skills is a must. Ability and willingness to thrive in a fast-paced, rapidly changing work environment. Passion for creating state-of-the-art hardware systems STRONGLY DESIRED 5+ years of experience in reliability engineering, testing, or quality assurance, preferably within the aerospace or satellite industry. Experience in high volume manufacturing, assembling and testing of electronic components. Experience in analyzing impact of radiation on electronic components and strategies to mitigate impact of radiation on electronic systems. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Sr Software Engineer for Warehouse Automation & Robotics - If you want your code to leave the screen and shape how a warehouse actually runs, this role provides that impact! This Jobot Job is hosted by: Liz Valdez Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $172,000 per year A bit about us: We are a distribution organization actively expanding our automation footprint and launching a new, highly automated facility. This role offers hands-on ownership of software that controls real-world material flow, exposure to greenfield automation projects, and close collaboration with operations to deliver systems that scale. You'll join a team that values hands-on problem solving, pragmatic engineering, and close collaboration between IT and operations, with long-term investment in modern automation, cloud and edge technologies, and continuous improvement. If you want your code to leave the screen and shape how a warehouse actually runs, this role provides that impact. Why join us? Comprehensive Health benefits + EAP 401k, Profit Sharing Retirement Plan Tuition Reimbursement Program HSA, FSA, Dependent Care Flex Spending Acct Life, AD&D, & AFLAC Plans Paid Vacation/Holidays/Sick Leave Job Details Senior Software Engineer - Warehouse Automation & Robotics Location: Remote Industry: Distribution / Supply Chain Automation Technical Environment : This role blends enterprise software engineering with industrial automation. This role offers the opportunity to work on greenfield automation tied to a new distribution center launch, with ownership across system design, integration, and go-live-not just post-implementation support. Engineers in this role have a direct voice in how automation is architected, how workflows are optimized, and how technology evolves as the operation scales. We are seeking a Senior Software Engineer with deep experience in warehouse automation, material handling systems, and WMS-integrated software to help design, build, and optimize the systems that physically move product through the facility. What You'll Be Doing This role sits at the intersection of software, automation, and operations. You will: Design and develop backend services that control and coordinate warehouse automation, including conveyors, scanners, labeling equipment, and routing logic Build software that reads scan data, applies business rules, and directs cartons to the correct lanes or destinations Evaluate existing automation workflows and re-engineer processes to improve speed, accuracy, and system reliability Integrate enterprise WMS platforms (SAP EWM) with automation systems using APIs, messaging, and industrial protocols Support the buildout and go-live of a new North Carolina distribution center, including testing, commissioning, and stabilization Troubleshoot automation issues in live environments and perform root-cause analysis across software and physical systems Partner closely with operations, controls engineers, and IT to align software design with real-world warehouse workflows Core Development Go (Golang) - primary backend language SQL (PostgreSQL, SQL Server, MySQL) Linux & Windows environments REST APIs, event-driven and message-based systems Automation & Integration SAP EWM / WMS integrations (APIs, IDocs, RFCs) Conveyor systems, scanners, print-and-apply labeling equipment PLCs and robotics exposure (Allen-Bradley, Siemens preferred) Industrial / IoT protocols: MQTT, CIP, Modbus (or similar) DevOps & Infrastructure CI/CD pipelines (Jenkins, GitLab CI, Azure DevOps) Docker, Kubernetes Hybrid cloud + edge computing (AWS, Azure, or GCP) Monitoring and observability tools (Prometheus, Grafana, ELK) Who This Role Is For: Have hands-on experience supporting automation in warehouses or manufacturing environments Understand how software decisions impact physical flow, uptime, and throughput Are comfortable being on-site during system launches and critical cutovers Enjoy solving problems where software meets machinery Required 5+ years backend software development with automation, WMS, or industrial system integration OR 7+ years backend development with significant automation/PLC/robotics exposure Experience supporting or leading multi-site rollouts or new facility launches Willingness to participate in rotating on-call support for mission-critical systems Preferred Distribution, manufacturing, life sciences, or high-volume fulfillment environments SAP EWM-integrated automation projects PLCs, robotics, or industrial IoT Cloud + edge architecture experience Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/04/2026
Full time
Sr Software Engineer for Warehouse Automation & Robotics - If you want your code to leave the screen and shape how a warehouse actually runs, this role provides that impact! This Jobot Job is hosted by: Liz Valdez Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $172,000 per year A bit about us: We are a distribution organization actively expanding our automation footprint and launching a new, highly automated facility. This role offers hands-on ownership of software that controls real-world material flow, exposure to greenfield automation projects, and close collaboration with operations to deliver systems that scale. You'll join a team that values hands-on problem solving, pragmatic engineering, and close collaboration between IT and operations, with long-term investment in modern automation, cloud and edge technologies, and continuous improvement. If you want your code to leave the screen and shape how a warehouse actually runs, this role provides that impact. Why join us? Comprehensive Health benefits + EAP 401k, Profit Sharing Retirement Plan Tuition Reimbursement Program HSA, FSA, Dependent Care Flex Spending Acct Life, AD&D, & AFLAC Plans Paid Vacation/Holidays/Sick Leave Job Details Senior Software Engineer - Warehouse Automation & Robotics Location: Remote Industry: Distribution / Supply Chain Automation Technical Environment : This role blends enterprise software engineering with industrial automation. This role offers the opportunity to work on greenfield automation tied to a new distribution center launch, with ownership across system design, integration, and go-live-not just post-implementation support. Engineers in this role have a direct voice in how automation is architected, how workflows are optimized, and how technology evolves as the operation scales. We are seeking a Senior Software Engineer with deep experience in warehouse automation, material handling systems, and WMS-integrated software to help design, build, and optimize the systems that physically move product through the facility. What You'll Be Doing This role sits at the intersection of software, automation, and operations. You will: Design and develop backend services that control and coordinate warehouse automation, including conveyors, scanners, labeling equipment, and routing logic Build software that reads scan data, applies business rules, and directs cartons to the correct lanes or destinations Evaluate existing automation workflows and re-engineer processes to improve speed, accuracy, and system reliability Integrate enterprise WMS platforms (SAP EWM) with automation systems using APIs, messaging, and industrial protocols Support the buildout and go-live of a new North Carolina distribution center, including testing, commissioning, and stabilization Troubleshoot automation issues in live environments and perform root-cause analysis across software and physical systems Partner closely with operations, controls engineers, and IT to align software design with real-world warehouse workflows Core Development Go (Golang) - primary backend language SQL (PostgreSQL, SQL Server, MySQL) Linux & Windows environments REST APIs, event-driven and message-based systems Automation & Integration SAP EWM / WMS integrations (APIs, IDocs, RFCs) Conveyor systems, scanners, print-and-apply labeling equipment PLCs and robotics exposure (Allen-Bradley, Siemens preferred) Industrial / IoT protocols: MQTT, CIP, Modbus (or similar) DevOps & Infrastructure CI/CD pipelines (Jenkins, GitLab CI, Azure DevOps) Docker, Kubernetes Hybrid cloud + edge computing (AWS, Azure, or GCP) Monitoring and observability tools (Prometheus, Grafana, ELK) Who This Role Is For: Have hands-on experience supporting automation in warehouses or manufacturing environments Understand how software decisions impact physical flow, uptime, and throughput Are comfortable being on-site during system launches and critical cutovers Enjoy solving problems where software meets machinery Required 5+ years backend software development with automation, WMS, or industrial system integration OR 7+ years backend development with significant automation/PLC/robotics exposure Experience supporting or leading multi-site rollouts or new facility launches Willingness to participate in rotating on-call support for mission-critical systems Preferred Distribution, manufacturing, life sciences, or high-volume fulfillment environments SAP EWM-integrated automation projects PLCs, robotics, or industrial IoT Cloud + edge architecture experience Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Fulltime Opportunity with Growing Public Accounting Firm This Jobot Consulting Job is hosted by: Kevin Shilney Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $160,000 per year A bit about us: We are a well-established public accounting firm with a longstanding history of serving clients in a variety of industries, including agriculture, real estate, manufacturing, and professional services. Our commitment to excellence, integrity, and personalized service has earned us a trusted reputation across Southern California and beyond. Our team of professionals prides itself on building meaningful client relationships while delivering high-quality tax, audit, and advisory solutions tailored to each client's needs. Why join us? Why Join Us Reputable, Stable Firm: Join a team with deep roots and a strong presence in the industry. Growth-Focused Culture: Take your career to the next level with structured professional development and leadership opportunities. Collaborative Environment: Work alongside experienced professionals who value mentorship, teamwork, and knowledge-sharing. Diverse Client Portfolio: Gain exposure to a wide range of industries and complex tax matters. Work-Life Balance: Enjoy flexibility and a culture that respects personal and family time-especially outside of busy season. Job Details Key Responsibilities: Manage and review complex federal and state income tax returns for individuals, corporations, partnerships, and trusts. Supervise, train, and mentor staff and seniors on tax projects and career development. Serve as the primary point of contact for clients-responding to inquiries, providing tax planning guidance, and ensuring satisfaction. Conduct tax research and stay up to date on changes in tax laws and regulations. Participate in strategic planning and contribute to firm growth initiatives. Ensure compliance with professional standards, firm policies, and government regulations. Qualifications CPA license required. Bachelor's degree in Accounting, Finance, or related field; Master's in Taxation preferred. 5+ years of experience in public accounting with a focus on taxation. Strong technical knowledge of tax laws, regulations, and compliance requirements. Proven ability to manage multiple priorities, deadlines, and client relationships. Proficient in tax software and Microsoft Office Suite. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/04/2026
Full time
Fulltime Opportunity with Growing Public Accounting Firm This Jobot Consulting Job is hosted by: Kevin Shilney Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $160,000 per year A bit about us: We are a well-established public accounting firm with a longstanding history of serving clients in a variety of industries, including agriculture, real estate, manufacturing, and professional services. Our commitment to excellence, integrity, and personalized service has earned us a trusted reputation across Southern California and beyond. Our team of professionals prides itself on building meaningful client relationships while delivering high-quality tax, audit, and advisory solutions tailored to each client's needs. Why join us? Why Join Us Reputable, Stable Firm: Join a team with deep roots and a strong presence in the industry. Growth-Focused Culture: Take your career to the next level with structured professional development and leadership opportunities. Collaborative Environment: Work alongside experienced professionals who value mentorship, teamwork, and knowledge-sharing. Diverse Client Portfolio: Gain exposure to a wide range of industries and complex tax matters. Work-Life Balance: Enjoy flexibility and a culture that respects personal and family time-especially outside of busy season. Job Details Key Responsibilities: Manage and review complex federal and state income tax returns for individuals, corporations, partnerships, and trusts. Supervise, train, and mentor staff and seniors on tax projects and career development. Serve as the primary point of contact for clients-responding to inquiries, providing tax planning guidance, and ensuring satisfaction. Conduct tax research and stay up to date on changes in tax laws and regulations. Participate in strategic planning and contribute to firm growth initiatives. Ensure compliance with professional standards, firm policies, and government regulations. Qualifications CPA license required. Bachelor's degree in Accounting, Finance, or related field; Master's in Taxation preferred. 5+ years of experience in public accounting with a focus on taxation. Strong technical knowledge of tax laws, regulations, and compliance requirements. Proven ability to manage multiple priorities, deadlines, and client relationships. Proficient in tax software and Microsoft Office Suite. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Fulltime Opportunity with Growing Public Accounting Firm This Jobot Consulting Job is hosted by: Kevin Shilney Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $160,000 per year A bit about us: We are a well-established public accounting firm with a longstanding history of serving clients in a variety of industries, including agriculture, real estate, manufacturing, and professional services. Our commitment to excellence, integrity, and personalized service has earned us a trusted reputation across Southern California and beyond. Our team of professionals prides itself on building meaningful client relationships while delivering high-quality tax, audit, and advisory solutions tailored to each client's needs. Why join us? Why Join Us Reputable, Stable Firm: Join a team with deep roots and a strong presence in the industry. Growth-Focused Culture: Take your career to the next level with structured professional development and leadership opportunities. Collaborative Environment: Work alongside experienced professionals who value mentorship, teamwork, and knowledge-sharing. Diverse Client Portfolio: Gain exposure to a wide range of industries and complex tax matters. Work-Life Balance: Enjoy flexibility and a culture that respects personal and family time-especially outside of busy season. Job Details Key Responsibilities: Manage and review complex federal and state income tax returns for individuals, corporations, partnerships, and trusts. Supervise, train, and mentor staff and seniors on tax projects and career development. Serve as the primary point of contact for clients-responding to inquiries, providing tax planning guidance, and ensuring satisfaction. Conduct tax research and stay up to date on changes in tax laws and regulations. Participate in strategic planning and contribute to firm growth initiatives. Ensure compliance with professional standards, firm policies, and government regulations. Qualifications CPA license required. Bachelor's degree in Accounting, Finance, or related field; Master's in Taxation preferred. 5+ years of experience in public accounting with a focus on taxation. Strong technical knowledge of tax laws, regulations, and compliance requirements. Proven ability to manage multiple priorities, deadlines, and client relationships. Proficient in tax software and Microsoft Office Suite. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/03/2026
Full time
Fulltime Opportunity with Growing Public Accounting Firm This Jobot Consulting Job is hosted by: Kevin Shilney Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $160,000 per year A bit about us: We are a well-established public accounting firm with a longstanding history of serving clients in a variety of industries, including agriculture, real estate, manufacturing, and professional services. Our commitment to excellence, integrity, and personalized service has earned us a trusted reputation across Southern California and beyond. Our team of professionals prides itself on building meaningful client relationships while delivering high-quality tax, audit, and advisory solutions tailored to each client's needs. Why join us? Why Join Us Reputable, Stable Firm: Join a team with deep roots and a strong presence in the industry. Growth-Focused Culture: Take your career to the next level with structured professional development and leadership opportunities. Collaborative Environment: Work alongside experienced professionals who value mentorship, teamwork, and knowledge-sharing. Diverse Client Portfolio: Gain exposure to a wide range of industries and complex tax matters. Work-Life Balance: Enjoy flexibility and a culture that respects personal and family time-especially outside of busy season. Job Details Key Responsibilities: Manage and review complex federal and state income tax returns for individuals, corporations, partnerships, and trusts. Supervise, train, and mentor staff and seniors on tax projects and career development. Serve as the primary point of contact for clients-responding to inquiries, providing tax planning guidance, and ensuring satisfaction. Conduct tax research and stay up to date on changes in tax laws and regulations. Participate in strategic planning and contribute to firm growth initiatives. Ensure compliance with professional standards, firm policies, and government regulations. Qualifications CPA license required. Bachelor's degree in Accounting, Finance, or related field; Master's in Taxation preferred. 5+ years of experience in public accounting with a focus on taxation. Strong technical knowledge of tax laws, regulations, and compliance requirements. Proven ability to manage multiple priorities, deadlines, and client relationships. Proficient in tax software and Microsoft Office Suite. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Full stack / React Node / Hybrid in Conshohocken This Jobot Job is hosted by: Katrina McFillin Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $135,000 - $145,000 per year A bit about us: We are a global leader in industrial process fluids that manufactures specialized chemical products and provides chemical management services for steel, aluminum, automotive, aerospace, mining, and other heavy industrial manufacturing processes Why join us? 401(k) + 4% company match 20 days PTO + floating holidays Health, dental, vision, and life insurance FSA flexible, hybrid work environment (3 days a week in office) gym and cafeteria on-site Job Details You will be joining the fluid intelligence team working on a greenfield, cloud native product to replace their 6th-generation legacy product. You are a full-stack engineer with experience building end-to-end, client-facing cloud-native applications. You preferrably have experience working with React, Node, and either AWS or Azure. You also have strong experience with Kubernetes and Docker. We are looking for someone who has built client facing applications from the ground up and deployed those to the cloud. If you do not have Node experience, that is ok. We are looking for folks with dynamic programming language background - Python or Java. We are currently utilizing Azure for our cloud and are also open to someone who has experience with Blazor from the Microsoft stack as that could be transferable to Node. This position will be 3 days a week onsite in Conshohocken. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/03/2026
Full time
Full stack / React Node / Hybrid in Conshohocken This Jobot Job is hosted by: Katrina McFillin Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $135,000 - $145,000 per year A bit about us: We are a global leader in industrial process fluids that manufactures specialized chemical products and provides chemical management services for steel, aluminum, automotive, aerospace, mining, and other heavy industrial manufacturing processes Why join us? 401(k) + 4% company match 20 days PTO + floating holidays Health, dental, vision, and life insurance FSA flexible, hybrid work environment (3 days a week in office) gym and cafeteria on-site Job Details You will be joining the fluid intelligence team working on a greenfield, cloud native product to replace their 6th-generation legacy product. You are a full-stack engineer with experience building end-to-end, client-facing cloud-native applications. You preferrably have experience working with React, Node, and either AWS or Azure. You also have strong experience with Kubernetes and Docker. We are looking for someone who has built client facing applications from the ground up and deployed those to the cloud. If you do not have Node experience, that is ok. We are looking for folks with dynamic programming language background - Python or Java. We are currently utilizing Azure for our cloud and are also open to someone who has experience with Blazor from the Microsoft stack as that could be transferable to Node. This position will be 3 days a week onsite in Conshohocken. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Design and deploy embedded systems that operate in real-world environments, with full ownership from architecture through production This Jobot Job is hosted by: Tyler May Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $150,000 - $190,000 per year A bit about us: Our client is a technology-driven organization focused on delivering intelligent hardware and software solutions that protect assets, improve operational visibility, and enhance public safety. Their systems combine embedded electronics, wireless connectivity, cloud platforms, and data intelligence to solve real-world problems at scale. This company partners with major retailers, municipalities, and enterprise customers across North America. Their solutions are deployed in the field, operating in dynamic, high-traffic environments where reliability, durability, and performance matter. They are growing and investing heavily in next-generation connected devices that integrate edge computing, video, sensors, and cloud-based analytics. Why join us? You'll have the opportunity to build products that are deployed in the real world, not just prototypes sitting on a bench. The work you do will directly impact customer operations and safety on a daily basis. This company operates with the agility of a mid-sized technology firm while serving large, established customers. Engineers here have meaningful ownership over architecture decisions, hardware selection, firmware design, and system performance. Additional highlights: Work on connected devices that blend hardware, firmware, and cloud integration High visibility role with influence across product and engineering teams Collaborative, cross-functional culture (hardware, firmware, cloud, manufacturing, field support) Opportunity to mentor junior engineers and shape engineering best practices Long product lifecycle ownership from concept through deployment and support If you enjoy building robust embedded systems that operate in demanding environments and want to see your work deployed at scale, this is a strong opportunity. Job Details Core Responsibilities: Design, develop, and maintain embedded firmware for connected devices Architect low-level software for microcontrollers and embedded Linux systems Interface with peripherals such as sensors, cameras, storage devices, wireless modules, and custom hardware Optimize system performance, memory usage, and power consumption Debug complex hardware/firmware interactions in both lab and field environments Collaborate with hardware engineers during board bring-up and validation Support manufacturing and production teams with firmware releases and diagnostics Contribute to system architecture decisions across device, edge, and cloud integration Technical Qualifications 7+ years of experience in embedded systems development Strong proficiency in C/C++ for embedded platforms Experience with RTOS and/or embedded Linux environments Familiarity with ARM-based microcontrollers or SoCs Experience with communication protocols such as SPI, I2C, UART, CAN, Ethernet, or similar Experience integrating wireless technologies (Wi-Fi, LTE, Bluetooth, etc.) Hands-on debugging using oscilloscopes, logic analyzers, and JTAG tools Understanding of version control systems (e.g., Git) and structured development processes Preferred Experience Experience with edge computing or video-enabled devices Familiarity with secure firmware practices and device authentication Exposure to cloud-connected IoT systems Experience supporting products through full lifecycle, including production and field deployment Prior experience mentoring junior engineers Education Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or related field Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
03/01/2026
Full time
Design and deploy embedded systems that operate in real-world environments, with full ownership from architecture through production This Jobot Job is hosted by: Tyler May Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $150,000 - $190,000 per year A bit about us: Our client is a technology-driven organization focused on delivering intelligent hardware and software solutions that protect assets, improve operational visibility, and enhance public safety. Their systems combine embedded electronics, wireless connectivity, cloud platforms, and data intelligence to solve real-world problems at scale. This company partners with major retailers, municipalities, and enterprise customers across North America. Their solutions are deployed in the field, operating in dynamic, high-traffic environments where reliability, durability, and performance matter. They are growing and investing heavily in next-generation connected devices that integrate edge computing, video, sensors, and cloud-based analytics. Why join us? You'll have the opportunity to build products that are deployed in the real world, not just prototypes sitting on a bench. The work you do will directly impact customer operations and safety on a daily basis. This company operates with the agility of a mid-sized technology firm while serving large, established customers. Engineers here have meaningful ownership over architecture decisions, hardware selection, firmware design, and system performance. Additional highlights: Work on connected devices that blend hardware, firmware, and cloud integration High visibility role with influence across product and engineering teams Collaborative, cross-functional culture (hardware, firmware, cloud, manufacturing, field support) Opportunity to mentor junior engineers and shape engineering best practices Long product lifecycle ownership from concept through deployment and support If you enjoy building robust embedded systems that operate in demanding environments and want to see your work deployed at scale, this is a strong opportunity. Job Details Core Responsibilities: Design, develop, and maintain embedded firmware for connected devices Architect low-level software for microcontrollers and embedded Linux systems Interface with peripherals such as sensors, cameras, storage devices, wireless modules, and custom hardware Optimize system performance, memory usage, and power consumption Debug complex hardware/firmware interactions in both lab and field environments Collaborate with hardware engineers during board bring-up and validation Support manufacturing and production teams with firmware releases and diagnostics Contribute to system architecture decisions across device, edge, and cloud integration Technical Qualifications 7+ years of experience in embedded systems development Strong proficiency in C/C++ for embedded platforms Experience with RTOS and/or embedded Linux environments Familiarity with ARM-based microcontrollers or SoCs Experience with communication protocols such as SPI, I2C, UART, CAN, Ethernet, or similar Experience integrating wireless technologies (Wi-Fi, LTE, Bluetooth, etc.) Hands-on debugging using oscilloscopes, logic analyzers, and JTAG tools Understanding of version control systems (e.g., Git) and structured development processes Preferred Experience Experience with edge computing or video-enabled devices Familiarity with secure firmware practices and device authentication Exposure to cloud-connected IoT systems Experience supporting products through full lifecycle, including production and field deployment Prior experience mentoring junior engineers Education Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or related field Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Electrical Engineer needed for well established global manufacturing company based in Davenport, IA This Jobot Job is hosted by: David Hyon Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $140,000 per year A bit about us: We are a leading top provider of metal sheet, plate, extrusions, and other innovative architectural products that support industries such as aerospace, automotive, building, and construction. We solve complex engineering challenges and transform the way we fly, drive and build. Why join us? Competitive Compensation, Bonus and Benefits Package Stable Career path Rewarding experience to work with fortune 500 Company Excellent culture and peers 401K Match 3 weeks of vacation to start Job Details The Electrical Engineer will provide support and leadership to the Rolling manufacturing and process areas. In this role, you will lead process improvement efforts on Rolling mills to improve equipment operation, product recovery, and support product development. Additional responsibilities include (but are not limited to) the following: Supporting product development by investigating, determining, and changing rolling models/processes required to run new product Support the operations and maintenance of Vision Systems, Measuring Systems, and Surface Quality Monitoring Systems installed on the Rolling equipment as well as lead execution of installation and commissioning on new Systems Advise/counsel/lead failure analysis; participate in and lead problem solving teams, identification of root cause and solutions and organize support from other resources Utilize technical knowledge-base and provide advanced technical guidance to ensure there is a thorough understanding of equipment and its effect on utilization, process and product quality Provide technical solutions to recurring design, process and application problems Maintain excellent working relationship with internal customers (such as: corporate technical resources, leadership teams, production, quality and maintenance resources) and external suppliers to ensure process improvement needs are understood and met Although this position is primarily a first shift position, due to the 24/7 manufacturing environment, working off-shift hours and/or weekends to support operations is expected, although not always required Qualifications: Bachelor's degree in Electrical Engineering from an accredited institution Minimum five (3) years of engineering experience with minimum of 5 years' experience in a manufacturing environment Basic understanding of statistics Basic understanding of Vision Systems and Surface Monitoring Systems Demonstrated proficiency in Industrial controls, programming (PLCs, C++, Python, Java, etc) Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
02/28/2026
Full time
Electrical Engineer needed for well established global manufacturing company based in Davenport, IA This Jobot Job is hosted by: David Hyon Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $140,000 per year A bit about us: We are a leading top provider of metal sheet, plate, extrusions, and other innovative architectural products that support industries such as aerospace, automotive, building, and construction. We solve complex engineering challenges and transform the way we fly, drive and build. Why join us? Competitive Compensation, Bonus and Benefits Package Stable Career path Rewarding experience to work with fortune 500 Company Excellent culture and peers 401K Match 3 weeks of vacation to start Job Details The Electrical Engineer will provide support and leadership to the Rolling manufacturing and process areas. In this role, you will lead process improvement efforts on Rolling mills to improve equipment operation, product recovery, and support product development. Additional responsibilities include (but are not limited to) the following: Supporting product development by investigating, determining, and changing rolling models/processes required to run new product Support the operations and maintenance of Vision Systems, Measuring Systems, and Surface Quality Monitoring Systems installed on the Rolling equipment as well as lead execution of installation and commissioning on new Systems Advise/counsel/lead failure analysis; participate in and lead problem solving teams, identification of root cause and solutions and organize support from other resources Utilize technical knowledge-base and provide advanced technical guidance to ensure there is a thorough understanding of equipment and its effect on utilization, process and product quality Provide technical solutions to recurring design, process and application problems Maintain excellent working relationship with internal customers (such as: corporate technical resources, leadership teams, production, quality and maintenance resources) and external suppliers to ensure process improvement needs are understood and met Although this position is primarily a first shift position, due to the 24/7 manufacturing environment, working off-shift hours and/or weekends to support operations is expected, although not always required Qualifications: Bachelor's degree in Electrical Engineering from an accredited institution Minimum five (3) years of engineering experience with minimum of 5 years' experience in a manufacturing environment Basic understanding of statistics Basic understanding of Vision Systems and Surface Monitoring Systems Demonstrated proficiency in Industrial controls, programming (PLCs, C++, Python, Java, etc) Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
