Senior Electronics Hardware Engineer Permanent hybrid, split onsite/remote £65k - £75k salary, plus Benefits Electronics, hardware, ECAD, pcb, fpgas Cutting edge medical manufacturer - growing organisation - developing new product line, is seeking experienced Senior/Lead Electronics Engineer (design and production) to drive productisation of revolutionary new technology used in medical/clinical settings. This is leading entire electronic design/productisation direction of the product, in unison with scientists and other engineering pillar leads at the same time as supporting a small junior engineering team. Medical device experience is not essential though there would be a requirement for the chosen candidate to be familiar with/comfortable working in regulated environments/on safety critical product development (R&D) What you'll do: Design, develop and analyze new power electronics devices and components. Create and analyze product specifications and process requirements to conceive a practical electronics design. Develops and maintains technical procedures, documentation and manuals using established procedures. Create Embedded controllers for power and water management devices Create test protocols and peripheral routines to test new designed products and electronics components. Create DFMEA's, engineering documentation, perform worst-case analysis and failure mode analysis. Help in R&D tests and analysis What you'll need: Safety critical (ideally medical, though not essential), R&D experience - R&D experience is essential (new product) 6+ years industry experience Significant experience leading product direction, or departmental level considerations around processes, design, organisational structure, productisation route etc etc Proficiency working experience in in analog circuits, digital circuits, high frequency power electronics circuit, microcontrollers, amongst other technologies. Strong familiarity and practical experience with E CAD design tools Altium would be ideal Ability to do schematics, PCB layout drawings and schematics simulations. Experience with typical test equipment. Strong skills in electronics circuit problem solving. For further information and a full consultation on this opportunity to join a true market disruptor with huge financial/institutional backing, please share your most recent CV.
Jun 01, 2023
Full time
Senior Electronics Hardware Engineer Permanent hybrid, split onsite/remote £65k - £75k salary, plus Benefits Electronics, hardware, ECAD, pcb, fpgas Cutting edge medical manufacturer - growing organisation - developing new product line, is seeking experienced Senior/Lead Electronics Engineer (design and production) to drive productisation of revolutionary new technology used in medical/clinical settings. This is leading entire electronic design/productisation direction of the product, in unison with scientists and other engineering pillar leads at the same time as supporting a small junior engineering team. Medical device experience is not essential though there would be a requirement for the chosen candidate to be familiar with/comfortable working in regulated environments/on safety critical product development (R&D) What you'll do: Design, develop and analyze new power electronics devices and components. Create and analyze product specifications and process requirements to conceive a practical electronics design. Develops and maintains technical procedures, documentation and manuals using established procedures. Create Embedded controllers for power and water management devices Create test protocols and peripheral routines to test new designed products and electronics components. Create DFMEA's, engineering documentation, perform worst-case analysis and failure mode analysis. Help in R&D tests and analysis What you'll need: Safety critical (ideally medical, though not essential), R&D experience - R&D experience is essential (new product) 6+ years industry experience Significant experience leading product direction, or departmental level considerations around processes, design, organisational structure, productisation route etc etc Proficiency working experience in in analog circuits, digital circuits, high frequency power electronics circuit, microcontrollers, amongst other technologies. Strong familiarity and practical experience with E CAD design tools Altium would be ideal Ability to do schematics, PCB layout drawings and schematics simulations. Experience with typical test equipment. Strong skills in electronics circuit problem solving. For further information and a full consultation on this opportunity to join a true market disruptor with huge financial/institutional backing, please share your most recent CV.
DOCUMENT CONTROLLER - LONG TERM CONTRACT Location: West London (hybrid working) Length of contract: 12-18 months with likely extensions (will also consider permanent) Determination: Outside IR35 We have a fantastic opportunity for a Senior Document Controller to join one of the UK's leading, multi-disciplinary building services consultancies on a long term mission critical project in West London. Our client specialises in engineering, architecture, environmental and construction services across large scale commercial and mission critical projects in more than 200 locations across the world. Job description: Creation of Document Registers / Drawing registers Uploading and sorting documentation to SharePoint Administration and collation of all addendum information Manage and maintain the document control system for the project Control security and access on the project within the EDMS and provide access to project team members, ensuring that security procedures have been followed Effectively manage the project containers within the EDMS and ensure that information is easily accessible Maintain a comprehensive understanding of all document control procedures, guidance documents and processes within the IMS Appropriately process and store project documentation within internal server and EDMS Issue documentation to third parties and external customers via notification Work effectively with suppliers, the client and other external parties to ensure that information is distributed and managed correctly Quality check all documents on project for compliance with company procedures prior to issue Flag issues with documents and closely monitor progress of documents in workflow procedures Monitor the project deliverables list and ensure that the project team are working to the correct procedures Compulsory requirements: Ability to navigate Email Axonex proficient (Neforma highly beneficial) Knowledge of data input Proven document control experience using electronic document management systems is essential Good knowledge of Microsoft (excel, word and Outlook) Construction experience working for a contractor Experience in mission critical sectors beneficial but not compulsory To discuss the above opportunity in more detail please contact Athena Antoniou on /
Jun 01, 2023
Full time
DOCUMENT CONTROLLER - LONG TERM CONTRACT Location: West London (hybrid working) Length of contract: 12-18 months with likely extensions (will also consider permanent) Determination: Outside IR35 We have a fantastic opportunity for a Senior Document Controller to join one of the UK's leading, multi-disciplinary building services consultancies on a long term mission critical project in West London. Our client specialises in engineering, architecture, environmental and construction services across large scale commercial and mission critical projects in more than 200 locations across the world. Job description: Creation of Document Registers / Drawing registers Uploading and sorting documentation to SharePoint Administration and collation of all addendum information Manage and maintain the document control system for the project Control security and access on the project within the EDMS and provide access to project team members, ensuring that security procedures have been followed Effectively manage the project containers within the EDMS and ensure that information is easily accessible Maintain a comprehensive understanding of all document control procedures, guidance documents and processes within the IMS Appropriately process and store project documentation within internal server and EDMS Issue documentation to third parties and external customers via notification Work effectively with suppliers, the client and other external parties to ensure that information is distributed and managed correctly Quality check all documents on project for compliance with company procedures prior to issue Flag issues with documents and closely monitor progress of documents in workflow procedures Monitor the project deliverables list and ensure that the project team are working to the correct procedures Compulsory requirements: Ability to navigate Email Axonex proficient (Neforma highly beneficial) Knowledge of data input Proven document control experience using electronic document management systems is essential Good knowledge of Microsoft (excel, word and Outlook) Construction experience working for a contractor Experience in mission critical sectors beneficial but not compulsory To discuss the above opportunity in more detail please contact Athena Antoniou on /
Capital Projects - Document ControllerStarting salary from £24,259Up to 5% bonusPermanent contractLocated in Thorpe Park (Leeds) Role Purpose. We have an exciting opportunity for Document Controller to join the Capital Projects and Maintenance Team . The role will provide support to the Capital Projects Investment and Delivery teams through the administering of the Integrated Management System and providing administrative support to the team on procurement and delivery activities. We value equality, diversity and inclusion at NGN and this is embedded in everything that we do. We will be delighted to hear from a diverse range of applicants, so we can continue to grow our mind-blowingly great team of people. We are proud to support the Armed Forces Covenant, helping ex-services personnel back into employment, as well as being members of WISE (Women in Science and Engineering) and we are committed to delivering our 'Opportunity Action Plan' having signed the Social Mobility Pledge campaign, whereby we will establish our business as a 'force for good' in the communities that we serve. If you require adjustments to support you in your application, we want to hear about how we can help. Therefore, any applicants that require reasonable adjustments throughout the selection or interview process or any further flexibility can contact us directly by emailing . Key Accountabilities and Responsibilities • The controlled receiving and distributing of information through the Capital Projects team and with external suppliers• Ensuring that the team are compliant with the IMS (Integrated Management System) procedures through auditing and reporting• Supporting the Senior Management Team through collation of MI based on performance across the team• Supporting the Capital Projects team with G17 administration• Managing the storing of hard and digital data within the archives• Supporting the Capital Projects team with SAP updates and procurement activities• Supporting the Capital Projects team with meeting administration Qualifications required Essential • Intermediate to Advanced Skills in MS Office specifically Excel as well as PDF documents• Very good attention to detail and strong ability to identify errors• Ability to enforce compliance rules and regulations • Excellent Communication Required• Auditing procedures and carrying out of audits/inspections Preferred • Knowledge and Experience in Capital Projects Databook System and Project Documentation• Auditing procedures and carrying out of audits/inspections What we Offer You • A competitive starting salary from £24,259 (higher rates negotiable dependent on experience of applicants)• Free onsite parking• 40 hours per week • Up to 5% bonus (dependent upon achievement of set targets) • 25 days annual leave (plus recognised bank holidays and 2 half days over the Christmas period) • SSP for first 7 calendar days then occupational sick pay• A generous stakeholder 5/10 pension scheme• Flexible benefits and salary sacrifice options from discounts on a variety of UK attractions, gym membership, restaurant discounts, experience days and exclusive NGN discounts and much more!• An array of fantastic family- friendly policies such as 6 weeks' paternity leave (for eligible employees) and 6 months' full pay for employees on maternity leave (for eligible employees), as well as shared parental leave and many more Our values are at the heart of what we do. In addition to your key responsibilities, you will incorporate these into the daily life of your role. We are Trailblazing, Empowered, Happy, Heartfelt, Intellectually Curious and Community Focused.
Jun 01, 2023
Full time
Capital Projects - Document ControllerStarting salary from £24,259Up to 5% bonusPermanent contractLocated in Thorpe Park (Leeds) Role Purpose. We have an exciting opportunity for Document Controller to join the Capital Projects and Maintenance Team . The role will provide support to the Capital Projects Investment and Delivery teams through the administering of the Integrated Management System and providing administrative support to the team on procurement and delivery activities. We value equality, diversity and inclusion at NGN and this is embedded in everything that we do. We will be delighted to hear from a diverse range of applicants, so we can continue to grow our mind-blowingly great team of people. We are proud to support the Armed Forces Covenant, helping ex-services personnel back into employment, as well as being members of WISE (Women in Science and Engineering) and we are committed to delivering our 'Opportunity Action Plan' having signed the Social Mobility Pledge campaign, whereby we will establish our business as a 'force for good' in the communities that we serve. If you require adjustments to support you in your application, we want to hear about how we can help. Therefore, any applicants that require reasonable adjustments throughout the selection or interview process or any further flexibility can contact us directly by emailing . Key Accountabilities and Responsibilities • The controlled receiving and distributing of information through the Capital Projects team and with external suppliers• Ensuring that the team are compliant with the IMS (Integrated Management System) procedures through auditing and reporting• Supporting the Senior Management Team through collation of MI based on performance across the team• Supporting the Capital Projects team with G17 administration• Managing the storing of hard and digital data within the archives• Supporting the Capital Projects team with SAP updates and procurement activities• Supporting the Capital Projects team with meeting administration Qualifications required Essential • Intermediate to Advanced Skills in MS Office specifically Excel as well as PDF documents• Very good attention to detail and strong ability to identify errors• Ability to enforce compliance rules and regulations • Excellent Communication Required• Auditing procedures and carrying out of audits/inspections Preferred • Knowledge and Experience in Capital Projects Databook System and Project Documentation• Auditing procedures and carrying out of audits/inspections What we Offer You • A competitive starting salary from £24,259 (higher rates negotiable dependent on experience of applicants)• Free onsite parking• 40 hours per week • Up to 5% bonus (dependent upon achievement of set targets) • 25 days annual leave (plus recognised bank holidays and 2 half days over the Christmas period) • SSP for first 7 calendar days then occupational sick pay• A generous stakeholder 5/10 pension scheme• Flexible benefits and salary sacrifice options from discounts on a variety of UK attractions, gym membership, restaurant discounts, experience days and exclusive NGN discounts and much more!• An array of fantastic family- friendly policies such as 6 weeks' paternity leave (for eligible employees) and 6 months' full pay for employees on maternity leave (for eligible employees), as well as shared parental leave and many more Our values are at the heart of what we do. In addition to your key responsibilities, you will incorporate these into the daily life of your role. We are Trailblazing, Empowered, Happy, Heartfelt, Intellectually Curious and Community Focused.
Main duties and responsibilities Ensuring that any hardware, software, operating systems or associated technology is designed, procured and delivered in the most efficient and cost effective manner and that all resources are used in such a way that maximises the benefit to UKHSA. Hold a strategic view of their own specialist area, keep Team Manager apprised of strategic developments and contribute to the wider Tech strategy and delivery plan. Supervising the activities of other specialist engineers and working in a collaborative manner with other Tech colleagues to deliver tasks successfully. Ensuring that there are adequate licenses for the resources used and working with colleagues in the commercial team to undertake negotiations with providers for the appropriate numbers and types of licenses. Ensure that UKHSA follows the most cost-effective purchasing strategy. Plan, configure, manage and maintain all hardware and software components of specialist area to deliver optimum system availability to users, and ensuring all supplier provided patches and upgrades to the operating system, database, tools and utilities are applied in a timely manner. Maintain the security and integrity of all systems related to specialist area including managing all user access rights and implementation of disaster recovery procedures. Providing technical and administrative support for specialist systems, including the production of system specification documentation and the production of relevant procedures and protocols. Essential Experience All Specialist Engineers must hold an industry recognised qualification or accreditation in their field of expertise, such as MCSE or MCITP. This is a role that demands detailed knowledge and considerable experience of specialist technologies. Therefore, each candidate must be able to demonstrate qualification and expertise in most of UKHSA's integral communications technologies, such as: Microsoft M365 cloud services and productivity tools; Microsoft Teams; Microsoft Exchange/Exchange Online; SIP trunks and ISDN telephone lines; Session border controllers; Mobile Telephony systems and mobile device management Must have significant previous experience of undertaking a senior specialist role and of managing systems at enterprise scale. Must have experience of operating at a senior level within an organisation and engaging and influencing senior stakeholders, both within ICT and in the wider business. Experience of developing strategic plans and implementation strategies for ICT infrastructure and platforms. Evidence of leading and managing a high performing technical team. Ability to speak credibly and authoritatively to technical and non-technical audiences and assimilate technical language quickly and effectively, for example delivering training and briefings to colleagues and/or business users Clear communicator with excellent writing, report writing and presentation skills; capable of constructing and delivering clear ideas and concepts concisely and accurately for diverse audiences, for example writing all-user emails, change requests or business cases Evidence of excellent customer service skills and a commitment to improving services and performance for end users. Evidence of effective leadership skills and the ability to set direction for a diverse, multiskilled team Evidence of strong team building skills Capable of managing conflict positively and using a range of abilities to best effect. Skills for communication on complex matters and difficult situations, requiring persuasion and influence, for example managing business customers through large changes or projects Skills for nurturing key relationships and maintaining personal networks Ability to analyse and interpret information, pre-empt and evaluate issues, and recommend and appropriate course of action to address the issues, for example analysing usage data to inform recommendations on future projects Problem solving skills and ability to respond to sudden unexpected demands Good planning and risk management skills, with the ability to pre-empt potential issues and mitigate effectively to stop system disruptions occurring. Ability to engender trust and confidence and demonstrate integrity in the provision of advice and support Ability to work on own initiative and organise own workload without supervision working to tight and often changing timescales Desirable Experience: Educated to degree or postgraduate level A supporting qualification in methods such as DevOps or Agile This role works within a team that is responsible for all communications and collaboration technologies. The candidate would benefit from knowledge of the following technologies, although they are not essential: Microsoft SharePoint; Microsoft Endpoint Manager; Asset control and management; Analogue Telephone Adapters and SIP; Gateway; Polycom Videoconferencing and MTRs; Microsoft licensing; Microsoft Windows Server and SQL Server; TCP/IP networking for more info click the apply here button
Jun 01, 2023
Full time
Main duties and responsibilities Ensuring that any hardware, software, operating systems or associated technology is designed, procured and delivered in the most efficient and cost effective manner and that all resources are used in such a way that maximises the benefit to UKHSA. Hold a strategic view of their own specialist area, keep Team Manager apprised of strategic developments and contribute to the wider Tech strategy and delivery plan. Supervising the activities of other specialist engineers and working in a collaborative manner with other Tech colleagues to deliver tasks successfully. Ensuring that there are adequate licenses for the resources used and working with colleagues in the commercial team to undertake negotiations with providers for the appropriate numbers and types of licenses. Ensure that UKHSA follows the most cost-effective purchasing strategy. Plan, configure, manage and maintain all hardware and software components of specialist area to deliver optimum system availability to users, and ensuring all supplier provided patches and upgrades to the operating system, database, tools and utilities are applied in a timely manner. Maintain the security and integrity of all systems related to specialist area including managing all user access rights and implementation of disaster recovery procedures. Providing technical and administrative support for specialist systems, including the production of system specification documentation and the production of relevant procedures and protocols. Essential Experience All Specialist Engineers must hold an industry recognised qualification or accreditation in their field of expertise, such as MCSE or MCITP. This is a role that demands detailed knowledge and considerable experience of specialist technologies. Therefore, each candidate must be able to demonstrate qualification and expertise in most of UKHSA's integral communications technologies, such as: Microsoft M365 cloud services and productivity tools; Microsoft Teams; Microsoft Exchange/Exchange Online; SIP trunks and ISDN telephone lines; Session border controllers; Mobile Telephony systems and mobile device management Must have significant previous experience of undertaking a senior specialist role and of managing systems at enterprise scale. Must have experience of operating at a senior level within an organisation and engaging and influencing senior stakeholders, both within ICT and in the wider business. Experience of developing strategic plans and implementation strategies for ICT infrastructure and platforms. Evidence of leading and managing a high performing technical team. Ability to speak credibly and authoritatively to technical and non-technical audiences and assimilate technical language quickly and effectively, for example delivering training and briefings to colleagues and/or business users Clear communicator with excellent writing, report writing and presentation skills; capable of constructing and delivering clear ideas and concepts concisely and accurately for diverse audiences, for example writing all-user emails, change requests or business cases Evidence of excellent customer service skills and a commitment to improving services and performance for end users. Evidence of effective leadership skills and the ability to set direction for a diverse, multiskilled team Evidence of strong team building skills Capable of managing conflict positively and using a range of abilities to best effect. Skills for communication on complex matters and difficult situations, requiring persuasion and influence, for example managing business customers through large changes or projects Skills for nurturing key relationships and maintaining personal networks Ability to analyse and interpret information, pre-empt and evaluate issues, and recommend and appropriate course of action to address the issues, for example analysing usage data to inform recommendations on future projects Problem solving skills and ability to respond to sudden unexpected demands Good planning and risk management skills, with the ability to pre-empt potential issues and mitigate effectively to stop system disruptions occurring. Ability to engender trust and confidence and demonstrate integrity in the provision of advice and support Ability to work on own initiative and organise own workload without supervision working to tight and often changing timescales Desirable Experience: Educated to degree or postgraduate level A supporting qualification in methods such as DevOps or Agile This role works within a team that is responsible for all communications and collaboration technologies. The candidate would benefit from knowledge of the following technologies, although they are not essential: Microsoft SharePoint; Microsoft Endpoint Manager; Asset control and management; Analogue Telephone Adapters and SIP; Gateway; Polycom Videoconferencing and MTRs; Microsoft licensing; Microsoft Windows Server and SQL Server; TCP/IP networking for more info click the apply here button
Excellent opportunity for a remote working L3 Senior Support Engineer in a growing tech company with ample opportunity for growth. This role is hybrid working with a requirement to go to the offices 4 times a month. These are exciting times for my international client who has continued to grow through the last 18 months (doubled in size and continuing on the same trajectory) at a rapid rate hence the need for this brand new L3 Support Engineer due to that growth. Huge opportunity for personal development and career progression in this company with a fantastic culture. The L3 Senior Support Engineer is responsible for providing specialist support to their partners and customers, across a portfolio of managed voice solutions and services. The service desk environment involves taking incoming calls, tickets and emails whilst always striving to provide the highest quality support. Duties and Responsibilities Monitor and react to key infrastructure alarms, metrics, or security events. Ticket ownership Communication - maintain excellent communications with all employees, clients and customers. Configuration of various cloud telephony platforms (Teams Direct Routing, Zoom Phone, Cisco) End-user training of systems Provide escalated support for BAU support teams. Ensure configuration is documented and knowledge is transferred to wider engineering and support teams. Provide escalated support for BAU support teams. Identify risks in infrastructure and report to Engineering function Carry out changes in line with process and customer and/or companies requirements Health & Safety - ensure all activities are undertaken in accordance with the Company's Health and Safety Policy. Standards - ensure the Company's operations and functions are undertaken in accordance with the approved procedures, processes or Company standards and any improvements are identified. Undertake any reasonable request to assist the Company meet internal and external expectations. Required: Experience in deploying PBX and hosted telephony systems Telephony, understanding of the concept Troubleshooting/root cause analysis IP networks and data networks knowledge and debugging SIP knowledge (protocols) understanding SIP codecs Teams Direct Routing experience Firewall understanding, role in networks High standard of written and verbal communication High levels of attention to detail Developed planning and prioritisation skills Expert customer service skills - a positive approach Experience in producing documentation and knowledge sharing Proactive approach to solutions: a common-sense approach Passion for technology Takes pride in brilliant work Professionalism Efficient time management Ideally: Session Border Controller experience (SBC) Broadworks exposure Wireshark debugging VoIPMonitor, Homer, OCM or similar ITIL Framework exposure Zoom Phone experience Appropriate telephony accreditations (School of SIP, MS700 etc.) The L3 Senior Support Engineer will undertake deliverables as part of multiple concurrent support tasks of varying size and complexity alongside operational duties with varying priorities. This role involves being the senior technical escalation within the operational team. If interested then please apply ASAP
Jun 01, 2023
Full time
Excellent opportunity for a remote working L3 Senior Support Engineer in a growing tech company with ample opportunity for growth. This role is hybrid working with a requirement to go to the offices 4 times a month. These are exciting times for my international client who has continued to grow through the last 18 months (doubled in size and continuing on the same trajectory) at a rapid rate hence the need for this brand new L3 Support Engineer due to that growth. Huge opportunity for personal development and career progression in this company with a fantastic culture. The L3 Senior Support Engineer is responsible for providing specialist support to their partners and customers, across a portfolio of managed voice solutions and services. The service desk environment involves taking incoming calls, tickets and emails whilst always striving to provide the highest quality support. Duties and Responsibilities Monitor and react to key infrastructure alarms, metrics, or security events. Ticket ownership Communication - maintain excellent communications with all employees, clients and customers. Configuration of various cloud telephony platforms (Teams Direct Routing, Zoom Phone, Cisco) End-user training of systems Provide escalated support for BAU support teams. Ensure configuration is documented and knowledge is transferred to wider engineering and support teams. Provide escalated support for BAU support teams. Identify risks in infrastructure and report to Engineering function Carry out changes in line with process and customer and/or companies requirements Health & Safety - ensure all activities are undertaken in accordance with the Company's Health and Safety Policy. Standards - ensure the Company's operations and functions are undertaken in accordance with the approved procedures, processes or Company standards and any improvements are identified. Undertake any reasonable request to assist the Company meet internal and external expectations. Required: Experience in deploying PBX and hosted telephony systems Telephony, understanding of the concept Troubleshooting/root cause analysis IP networks and data networks knowledge and debugging SIP knowledge (protocols) understanding SIP codecs Teams Direct Routing experience Firewall understanding, role in networks High standard of written and verbal communication High levels of attention to detail Developed planning and prioritisation skills Expert customer service skills - a positive approach Experience in producing documentation and knowledge sharing Proactive approach to solutions: a common-sense approach Passion for technology Takes pride in brilliant work Professionalism Efficient time management Ideally: Session Border Controller experience (SBC) Broadworks exposure Wireshark debugging VoIPMonitor, Homer, OCM or similar ITIL Framework exposure Zoom Phone experience Appropriate telephony accreditations (School of SIP, MS700 etc.) The L3 Senior Support Engineer will undertake deliverables as part of multiple concurrent support tasks of varying size and complexity alongside operational duties with varying priorities. This role involves being the senior technical escalation within the operational team. If interested then please apply ASAP
Senior Network Infrastructure Engineer Location: Plymouth (Hybrid) Permanent Paying up to 55K base + bonus + additional benifits OVERVIEW: My client is a Niche IT Consultancy providing support to the public Sector in the South West of the the UK. Due to continued growth they are looking for a Senior Network Infrastructure Engineer to join them on a permanent basis. To lead and contribute on the successful delivery of Infrastructure projects as a networking subject matter expert. Autonomously delivering small, medium and large sized projects across the Infrastructure portfolio RESPONSIBILITIES: You will lead and contribute on the successful delivery of Infrastructure projects as a networking subject matter expert. Autonomously delivering small, medium and large sized projects across the Infrastructure portfolio. Implements network and infrastructure projects for customers in a complex and multi-tenant environment. Works on the design, implementation and transition of key projects with a focus on customer satisfaction and in accordance with IT strategy, technology architecture, compliance, best practice and industry standards Implements network and infrastructure projects for customers in a complex and multi-tenant environment. Works on the design, implementation and transition of key projects with a focus on customer satisfaction and in accordance with IT strategy, technology architecture, compliance, best practice and industry standards Creates high- and low-level technical designs for network solutions. Ensures adequate transition from project delivery to operational support; working to reduce the risk of service failure. Works to ensure documentation is accurate and current for Infrastructure solutions. Supports the production of corporate business cases, providing estimates for internal/external delivery of secure IT solutions. Engages directly with the costumer as part of the project delivery team to undertake customer requirements and challenge analysis, present solutions and challenge customer need to ensure successful delivery of the most appropriate solution. Provides technical advice to customers to maximise their understanding. Keeps abreast of new technology trends and developing solutions in the infrastructure arena. Supports the network operation lifecycle by reviewing and implementing change, supporting delivery of new services, working with the Operations lead on capacity and uptime Keeps abreast of new technology trends and developing solutions in the IT Infrastructure arena. Demonstrates a keen desire for continual development of personal and professional skills. The accountabilities listed here are not an exhaustive list. The post holder will be required to work in any area of the business and deliver ad-hoc duties as and when directed EXPERIENCE & QUALIFICATIONS: Switching and routing in a commercial environment. Implementation & Troubleshooting of Enterprise Network Infrastructure Supporting SD-WAN Networks Cisco & Meraki Routing & Switching Knowledge and understanding of data centre, compute and application environments, both on-premise and cloud Managing and maintaining firewalls in a commercial environment. (Checkpoint, Cisco ASA, FortiGate, Meraki desirable) Wireless access points and controllers (Cisco, Meraki, Fortinet ) MPLS, BGP & OSPF Load Balancing, e.g. F5 BIG IP, FortiGate Experience engaging with customers (internal or external) on solution design, delivery and support Implementation/design experience with SD-WAN Telephone system support and implementation experience (MS Teams, Alcatel, Avaya) High- and Low-level design creation (desirable) Due to high volume, we can only respond to applications that match the criteria.
Jun 01, 2023
Full time
Senior Network Infrastructure Engineer Location: Plymouth (Hybrid) Permanent Paying up to 55K base + bonus + additional benifits OVERVIEW: My client is a Niche IT Consultancy providing support to the public Sector in the South West of the the UK. Due to continued growth they are looking for a Senior Network Infrastructure Engineer to join them on a permanent basis. To lead and contribute on the successful delivery of Infrastructure projects as a networking subject matter expert. Autonomously delivering small, medium and large sized projects across the Infrastructure portfolio RESPONSIBILITIES: You will lead and contribute on the successful delivery of Infrastructure projects as a networking subject matter expert. Autonomously delivering small, medium and large sized projects across the Infrastructure portfolio. Implements network and infrastructure projects for customers in a complex and multi-tenant environment. Works on the design, implementation and transition of key projects with a focus on customer satisfaction and in accordance with IT strategy, technology architecture, compliance, best practice and industry standards Implements network and infrastructure projects for customers in a complex and multi-tenant environment. Works on the design, implementation and transition of key projects with a focus on customer satisfaction and in accordance with IT strategy, technology architecture, compliance, best practice and industry standards Creates high- and low-level technical designs for network solutions. Ensures adequate transition from project delivery to operational support; working to reduce the risk of service failure. Works to ensure documentation is accurate and current for Infrastructure solutions. Supports the production of corporate business cases, providing estimates for internal/external delivery of secure IT solutions. Engages directly with the costumer as part of the project delivery team to undertake customer requirements and challenge analysis, present solutions and challenge customer need to ensure successful delivery of the most appropriate solution. Provides technical advice to customers to maximise their understanding. Keeps abreast of new technology trends and developing solutions in the infrastructure arena. Supports the network operation lifecycle by reviewing and implementing change, supporting delivery of new services, working with the Operations lead on capacity and uptime Keeps abreast of new technology trends and developing solutions in the IT Infrastructure arena. Demonstrates a keen desire for continual development of personal and professional skills. The accountabilities listed here are not an exhaustive list. The post holder will be required to work in any area of the business and deliver ad-hoc duties as and when directed EXPERIENCE & QUALIFICATIONS: Switching and routing in a commercial environment. Implementation & Troubleshooting of Enterprise Network Infrastructure Supporting SD-WAN Networks Cisco & Meraki Routing & Switching Knowledge and understanding of data centre, compute and application environments, both on-premise and cloud Managing and maintaining firewalls in a commercial environment. (Checkpoint, Cisco ASA, FortiGate, Meraki desirable) Wireless access points and controllers (Cisco, Meraki, Fortinet ) MPLS, BGP & OSPF Load Balancing, e.g. F5 BIG IP, FortiGate Experience engaging with customers (internal or external) on solution design, delivery and support Implementation/design experience with SD-WAN Telephone system support and implementation experience (MS Teams, Alcatel, Avaya) High- and Low-level design creation (desirable) Due to high volume, we can only respond to applications that match the criteria.
Harper Recruitment Group
Nottingham, Nottinghamshire
Job Role: Document ControllerSalary: £35k+Location: NottinghamHarper Recruitment Group are excited to be working in partnership with a leading payroll solutions organisation, we are looking for an experienced Document Controller/Project Manager to work within their compliance team.As the company have a variety of European and International skills language skills would be a great advantage in particular Spanish/French but this is essential for the role.The day to day: Set up new clients on the internal system Maintain confidential and sensitive information in various internal databases Manage the flow of documentation within our organization Reviewing agency contracts and checking for accuracy Issue contracts based on internal contract templates Liaise with contractors and agencies to ensure quick turnaround of onboarding process and signing up Keeping up with contractor registration procedures for various European countries and collecting evidence of registration Prepare UK compliance forms Compliance in Belgium & Spain Dealing with payment queries Preparation of information for payments team Who are we looking for? Proven work experience as a Document Controller or similar role Familiarity with project management Hands-on experience with MS Office and MS Excel Knowledge of Electronic Document Management Systems (EDMS) Attention to detail Spanish and/or French proficient would be a preference In return for hard work the business offers a generous package, a rewarding career path, supported and mentored from senior management to become successful in the company.Please submit your CV today to applyUnfortunately, we are unable to contact all candidates due to the large volume of applications we receive. If you have not heard from a consultant within the next three days please assume that you have not been successful on this occasion. Please do not hesitate to apply for other suitable roles in the future.
Jun 01, 2023
Full time
Job Role: Document ControllerSalary: £35k+Location: NottinghamHarper Recruitment Group are excited to be working in partnership with a leading payroll solutions organisation, we are looking for an experienced Document Controller/Project Manager to work within their compliance team.As the company have a variety of European and International skills language skills would be a great advantage in particular Spanish/French but this is essential for the role.The day to day: Set up new clients on the internal system Maintain confidential and sensitive information in various internal databases Manage the flow of documentation within our organization Reviewing agency contracts and checking for accuracy Issue contracts based on internal contract templates Liaise with contractors and agencies to ensure quick turnaround of onboarding process and signing up Keeping up with contractor registration procedures for various European countries and collecting evidence of registration Prepare UK compliance forms Compliance in Belgium & Spain Dealing with payment queries Preparation of information for payments team Who are we looking for? Proven work experience as a Document Controller or similar role Familiarity with project management Hands-on experience with MS Office and MS Excel Knowledge of Electronic Document Management Systems (EDMS) Attention to detail Spanish and/or French proficient would be a preference In return for hard work the business offers a generous package, a rewarding career path, supported and mentored from senior management to become successful in the company.Please submit your CV today to applyUnfortunately, we are unable to contact all candidates due to the large volume of applications we receive. If you have not heard from a consultant within the next three days please assume that you have not been successful on this occasion. Please do not hesitate to apply for other suitable roles in the future.
Senior Embedded Software Consultant - Surrey - £50,000 - £75,000+ pa (depending on experience) After a record financial year, an award-winning consultancy company in the Surrey area is looking for an Embedded Software Engineer to join their team working across a range of industries with cutting-edge technology. They are open to different levels of experience from mid-senior with multiple openings available. Responsibilities: Contribute to the whole product development life cycle Developing novel signal and image processing applications in C/C++ Developing User Interfaces Communicating with clients, understanding & taking their requirements and turning them into practical product. Documentation of software architecture & design Key Skills/Experience: Have a good (1st/2:1) degree or a PhD in a Electronics Engineering or another relevant discipline. A strong academic background typically including A's in A levels such as Maths and Physics Have at least 3 or more years in software development experience in Embedded C/C++ Understanding and experience using and configuring Linux systems. RTOS/Bare-metal programming Microcontrollers & peripherals Any mix of the following is nice to have : RF systems Defence or regulated standards Wireless communication systems (Bluetooth/ Wi-Fi/ IoT) Benefits: 10% Pension 25 days holiday + bank holidays Life Insurance Income Protection + many more! If you are interested in the position and think you have the skills required, please don't hesitate to reply with an up-to-date CV and your availability to interview. We also offer a great referral scheme for a successful applicant so if anyone else you know could be interested, please get them in touch.If this job is not for you then please look at my LinkedIn, I also post all my jobs on there too.If you are interested in the position and think you have the skills required as Senior Embedded Software Consultant please don't hesitate to apply.Any questions, contact Samuel May at or call .
Jun 01, 2023
Full time
Senior Embedded Software Consultant - Surrey - £50,000 - £75,000+ pa (depending on experience) After a record financial year, an award-winning consultancy company in the Surrey area is looking for an Embedded Software Engineer to join their team working across a range of industries with cutting-edge technology. They are open to different levels of experience from mid-senior with multiple openings available. Responsibilities: Contribute to the whole product development life cycle Developing novel signal and image processing applications in C/C++ Developing User Interfaces Communicating with clients, understanding & taking their requirements and turning them into practical product. Documentation of software architecture & design Key Skills/Experience: Have a good (1st/2:1) degree or a PhD in a Electronics Engineering or another relevant discipline. A strong academic background typically including A's in A levels such as Maths and Physics Have at least 3 or more years in software development experience in Embedded C/C++ Understanding and experience using and configuring Linux systems. RTOS/Bare-metal programming Microcontrollers & peripherals Any mix of the following is nice to have : RF systems Defence or regulated standards Wireless communication systems (Bluetooth/ Wi-Fi/ IoT) Benefits: 10% Pension 25 days holiday + bank holidays Life Insurance Income Protection + many more! If you are interested in the position and think you have the skills required, please don't hesitate to reply with an up-to-date CV and your availability to interview. We also offer a great referral scheme for a successful applicant so if anyone else you know could be interested, please get them in touch.If this job is not for you then please look at my LinkedIn, I also post all my jobs on there too.If you are interested in the position and think you have the skills required as Senior Embedded Software Consultant please don't hesitate to apply.Any questions, contact Samuel May at or call .
Purpose of the Role: A Senior Embedded Linux Engineer is responsible for architecting, designing, developing and installing embedded software solutions in Linux; Support software QA and optimize I/O performance, analyze, monitor and improve efficiency and stability of the system, interface with hardware design and development, requirements definition, testing and documentation of software systems including embedded applications support. Key Responsibilities: Design, develop, modify, implement, and support software components anywhere in the Software stack. Develop and maintain embedded Linux systems including kernel, U-boot, and device drivers and API Work with Yocto, board bring up for ARM based platforms, hardware/software integration, build cross-compiler toolchain, static code analysis tools, maintain build servers Integrate / develop applications using Qt. Automate tasks with scripting languages such as Bash and Python Utilize software engineering tools such as configuration management systems, build processes and in-circuit debuggers in the software development process. Develop software / firmware in C++ and other selected languages for company products and / or applications Work with GIT and SVN Develop solutions with IoT, WiFi, BLE, I2C, SPI, PCIe, Ethernet Debug and support existing software applications Define, perform and supervise testing to ensure specifications are met. This typically includes module integration, system and design verification tests. Analyze data and results to identify potential and actual faults in the design. Assist in generating project proposals in response to Marketing requirements by estimating hardware & software requirements, engineering effort and cost. Work from schedules, specifications, schematics, work orders, verbal and written instructions. Specify and use a full range of electronic test equipment, computer hardware and software. Work as part of interdepartmental project team. Act as Engineering Project Leader as assigned. Follow product development principles defined in Product Development System. Provide support to other operating departments and travel to vender and customer sites to provide technical support when required. Inform supervisor of unusual circumstances or problems and perform other related duties as assigned. Skills Required: MSCS, MSEE or MSCE with emphasis on embedded firmware development using high level programming languages. At least eight years' experience in firmware development for microcontroller / microprocessor systems or five in a senior role Demonstrated experience with embedded Linux, Yocto, Qt, embedded C and C++. Experience with advanced concepts of computer architecture, data structures and standard programming practices. Experience with software configuration management tools, defect tracking tools, and peer review Salary: Competitive salary offered plus a comprehensive benefits. Kelly Services are acting as an Employment Agency in relation to this role. Should you choose to apply, your information will be processed in accordance with Kelly's Privacy Statement. For information regarding data protection at Kelly, please visit the Kelly website and have a look into the Privacy Statement. As an Equal Opportunities employer we welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age.
Jun 01, 2023
Full time
Purpose of the Role: A Senior Embedded Linux Engineer is responsible for architecting, designing, developing and installing embedded software solutions in Linux; Support software QA and optimize I/O performance, analyze, monitor and improve efficiency and stability of the system, interface with hardware design and development, requirements definition, testing and documentation of software systems including embedded applications support. Key Responsibilities: Design, develop, modify, implement, and support software components anywhere in the Software stack. Develop and maintain embedded Linux systems including kernel, U-boot, and device drivers and API Work with Yocto, board bring up for ARM based platforms, hardware/software integration, build cross-compiler toolchain, static code analysis tools, maintain build servers Integrate / develop applications using Qt. Automate tasks with scripting languages such as Bash and Python Utilize software engineering tools such as configuration management systems, build processes and in-circuit debuggers in the software development process. Develop software / firmware in C++ and other selected languages for company products and / or applications Work with GIT and SVN Develop solutions with IoT, WiFi, BLE, I2C, SPI, PCIe, Ethernet Debug and support existing software applications Define, perform and supervise testing to ensure specifications are met. This typically includes module integration, system and design verification tests. Analyze data and results to identify potential and actual faults in the design. Assist in generating project proposals in response to Marketing requirements by estimating hardware & software requirements, engineering effort and cost. Work from schedules, specifications, schematics, work orders, verbal and written instructions. Specify and use a full range of electronic test equipment, computer hardware and software. Work as part of interdepartmental project team. Act as Engineering Project Leader as assigned. Follow product development principles defined in Product Development System. Provide support to other operating departments and travel to vender and customer sites to provide technical support when required. Inform supervisor of unusual circumstances or problems and perform other related duties as assigned. Skills Required: MSCS, MSEE or MSCE with emphasis on embedded firmware development using high level programming languages. At least eight years' experience in firmware development for microcontroller / microprocessor systems or five in a senior role Demonstrated experience with embedded Linux, Yocto, Qt, embedded C and C++. Experience with advanced concepts of computer architecture, data structures and standard programming practices. Experience with software configuration management tools, defect tracking tools, and peer review Salary: Competitive salary offered plus a comprehensive benefits. Kelly Services are acting as an Employment Agency in relation to this role. Should you choose to apply, your information will be processed in accordance with Kelly's Privacy Statement. For information regarding data protection at Kelly, please visit the Kelly website and have a look into the Privacy Statement. As an Equal Opportunities employer we welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age.
Document Controller; Glasgow; 12-month Contract; £12.25 ph.; Inside IR35. We currently have a vacancy for a Document Controller to work with our client BAE Systems at the Scotstoun site. Duties are as follows. Collect, scan and upload documents following set procedures. Ensure all technical documents, such as reports, plans and drawings, are collected and registered in system when delivered to the customer. Manage the file library folder structure to ensure filed documents are easy to find in the future Notify personnel of updated document versions and how to access them. Print and distribute documents as necessary. Work with documents and records across various departments, including engineering,procurement and Project Management Candidates should have previous administration /document control experience and be proficient in the use of MS Office . Attention to detail, time management and good organisation skills are essential . Good communication skills are required with the ability to communicate to all levels including senior management. Good people skills are needed and ability to work within a multi-disciplined team and environment, you will also be self-motivated with the ability to perform under pressure. Morson is acting as an employment business in relation to this role. Administration filing e-filing GDPR secretarial data entry data input Excel Word Outlook Access MS Office booking system business support database management diary management minute taking document control engineering administration
Jun 01, 2023
Full time
Document Controller; Glasgow; 12-month Contract; £12.25 ph.; Inside IR35. We currently have a vacancy for a Document Controller to work with our client BAE Systems at the Scotstoun site. Duties are as follows. Collect, scan and upload documents following set procedures. Ensure all technical documents, such as reports, plans and drawings, are collected and registered in system when delivered to the customer. Manage the file library folder structure to ensure filed documents are easy to find in the future Notify personnel of updated document versions and how to access them. Print and distribute documents as necessary. Work with documents and records across various departments, including engineering,procurement and Project Management Candidates should have previous administration /document control experience and be proficient in the use of MS Office . Attention to detail, time management and good organisation skills are essential . Good communication skills are required with the ability to communicate to all levels including senior management. Good people skills are needed and ability to work within a multi-disciplined team and environment, you will also be self-motivated with the ability to perform under pressure. Morson is acting as an employment business in relation to this role. Administration filing e-filing GDPR secretarial data entry data input Excel Word Outlook Access MS Office booking system business support database management diary management minute taking document control engineering administration
Senior Network Engineer ASR Group is the world's largest refiner and marketer of cane sugar, with an annual production capacity of more than 6 million tons of sugar. The company produces a full line of grocery, industrial, food service and specialty sweetener products. Across North America, ASR Group owns and operates six sugar refineries. The company's brand portfolio includes the leading brands Domino , C&H , Redpath , Tate & Lyle , Lyle's and Sidul What will you be doing? We are seeking an experienced Senior Network Engineer to join our dynamic team. The ideal candidate will be responsible for implementing the company's network infrastructure, resolving advanced support issues, and managing the support and project tasks for the network engineering staff. Day to day you will: Maintain high-level performance of network infrastructure through routine monitoring, maintenance, and troubleshooting. Implement, maintain and recommend improvements to network configurations of firewalls, IDP, VPN, and other network security devices. Evaluate and recommend new hardware and software purchases to enhance network and security operations. Develop and maintain concise network documentation, inventory and diagrams. Work with other IT teams and clients to assist with projects & initiatives, device maintenance, troubleshooting and support issues. Collaborate with the network architect to design and implement functional company networks. Work collaboratively with other teams - security, architecture, operations technology, etc. Track and ensure licenses, SmartNet, software, EOL project documents are up to date. Manage network project tasks/change control and coordinate scheduling and network resources. Monitor Network Performance and integrity - conduct regular network performance tests. Reporting - network status reports and updates on the status of projects to management and stakeholders. What are we looking for? An experienced Senior Network Engineer who is looking for their next step up in their career. Whilst we require someone with a similar background/experience to hit the ground running there will be lots of opportunity to build upon your existing skills and experience. Must be proficient in programming Cisco switches and routers to include configuration of IP Telephony Must be proficient in implementation of wireless networks to include configuration of Wireless LAN Controllers, CAPWAP, FlexConnect, EAP-TLS, RADIUS. Strong knowledge and skills with Network protocol and security analysis tools, routing protocols, VLAN Security, and VPN. Preferred experience working with Windows networking applications including Active Directory, ISA, DHCP, DNS, and SNMP. Extensive knowledge of the methods and procedures applicable to networking systems operation, installation and maintenance. Skill in the development of specifications and evaluation of bids for the purchase of equipment and services. Professional certification - CCNP/CCDP Ability to prepare and present data and reports to support system and equipment improvements and/or replacement recommendations. Training - We will support you by providing the tools to identify and pursue your own personal development plan, having dedicated time to discuss performance, development, and career progression. Full training will be provided whether that's learning on the job, mentoring or external IT technical courses classroom or virtual. We want you to achieve your full potential! This is a great opportunity for someone who is looking for that next step with lots of opportunity to learn and grow here at Tate & Lyle Sugars. What can Tate & Lyle offer you Our Reward philosophy at ASR Group is through merit-based pay which enables us to recognize your personal contribution and encourages your development and advancement. We are proud of the suite of benefits we offer and there's more to share with you as you go through our recruitment process! 26 days annual holiday plus bank holidays 9% Company Contributed Pension Scheme (when you contribute a minimum of 3%) 3 Volunteering/ Charity Days per year Life Assurance Scheme and Income protection scheme Discretionary Annual Bonus Family Friendly Policies Private Medical Insurance Employee Assistance Programme At Tate & Lyle Sugars, the group's values are the cornerstone of our success. Leadership - our goal is to be the leader in every arena in which we compete. Teamwork - our strength is magnified when we work together. Integrity - honesty and trust are the foundation of our success. Service - we know that the people and communities in which we operate are crucial partners to our success. Sustainability - the member companies of ASR Group are committed to sustainable agricultural and business practices
Jun 01, 2023
Full time
Senior Network Engineer ASR Group is the world's largest refiner and marketer of cane sugar, with an annual production capacity of more than 6 million tons of sugar. The company produces a full line of grocery, industrial, food service and specialty sweetener products. Across North America, ASR Group owns and operates six sugar refineries. The company's brand portfolio includes the leading brands Domino , C&H , Redpath , Tate & Lyle , Lyle's and Sidul What will you be doing? We are seeking an experienced Senior Network Engineer to join our dynamic team. The ideal candidate will be responsible for implementing the company's network infrastructure, resolving advanced support issues, and managing the support and project tasks for the network engineering staff. Day to day you will: Maintain high-level performance of network infrastructure through routine monitoring, maintenance, and troubleshooting. Implement, maintain and recommend improvements to network configurations of firewalls, IDP, VPN, and other network security devices. Evaluate and recommend new hardware and software purchases to enhance network and security operations. Develop and maintain concise network documentation, inventory and diagrams. Work with other IT teams and clients to assist with projects & initiatives, device maintenance, troubleshooting and support issues. Collaborate with the network architect to design and implement functional company networks. Work collaboratively with other teams - security, architecture, operations technology, etc. Track and ensure licenses, SmartNet, software, EOL project documents are up to date. Manage network project tasks/change control and coordinate scheduling and network resources. Monitor Network Performance and integrity - conduct regular network performance tests. Reporting - network status reports and updates on the status of projects to management and stakeholders. What are we looking for? An experienced Senior Network Engineer who is looking for their next step up in their career. Whilst we require someone with a similar background/experience to hit the ground running there will be lots of opportunity to build upon your existing skills and experience. Must be proficient in programming Cisco switches and routers to include configuration of IP Telephony Must be proficient in implementation of wireless networks to include configuration of Wireless LAN Controllers, CAPWAP, FlexConnect, EAP-TLS, RADIUS. Strong knowledge and skills with Network protocol and security analysis tools, routing protocols, VLAN Security, and VPN. Preferred experience working with Windows networking applications including Active Directory, ISA, DHCP, DNS, and SNMP. Extensive knowledge of the methods and procedures applicable to networking systems operation, installation and maintenance. Skill in the development of specifications and evaluation of bids for the purchase of equipment and services. Professional certification - CCNP/CCDP Ability to prepare and present data and reports to support system and equipment improvements and/or replacement recommendations. Training - We will support you by providing the tools to identify and pursue your own personal development plan, having dedicated time to discuss performance, development, and career progression. Full training will be provided whether that's learning on the job, mentoring or external IT technical courses classroom or virtual. We want you to achieve your full potential! This is a great opportunity for someone who is looking for that next step with lots of opportunity to learn and grow here at Tate & Lyle Sugars. What can Tate & Lyle offer you Our Reward philosophy at ASR Group is through merit-based pay which enables us to recognize your personal contribution and encourages your development and advancement. We are proud of the suite of benefits we offer and there's more to share with you as you go through our recruitment process! 26 days annual holiday plus bank holidays 9% Company Contributed Pension Scheme (when you contribute a minimum of 3%) 3 Volunteering/ Charity Days per year Life Assurance Scheme and Income protection scheme Discretionary Annual Bonus Family Friendly Policies Private Medical Insurance Employee Assistance Programme At Tate & Lyle Sugars, the group's values are the cornerstone of our success. Leadership - our goal is to be the leader in every arena in which we compete. Teamwork - our strength is magnified when we work together. Integrity - honesty and trust are the foundation of our success. Service - we know that the people and communities in which we operate are crucial partners to our success. Sustainability - the member companies of ASR Group are committed to sustainable agricultural and business practices
Description and requirements Skanska, a leading construction company and developer, is an inclusive and responsible business that is helping to build a better society. Known for many major projects, we are creating, upgrading and maintaining the country's buildings and infrastructure. Drawing on our Scandinavian heritage, we are green, innovative and progressive. We bring together people and technology, helping to make our industry safer and more collaborative. Our infrastructure team brings its design, build and refurbishment expertise to complex projects across the country. We form strong partnerships with clients and communities to deliver major infrastructure improvements like Crossrail, HS2, A14 and the M25 widening. We have an exciting opportunity for a Senior Information Controller to join us. Reporting to the Lead Information Controller, you will lead a project with one of our key customers. You will support the team with the management of information and the CDE throughout the project lifecycle. You will be responsible for leading the daily information exchange activities. You will ensure the coordination and dissemination of key project information to support delivery and drive efficiencies throughout the scheme. You'll: Deliver the project Information Control with a data-driven and automation focus. Manage the daily information exchange activities, including but not limited to issuing and receiving documents in accordance to ISO 19650 and/or any other standard requested by the client. Supporting the Lead Information Controller in managing the CDE system including it's configuration, folder structure and users. Generate reports and fill in dashboards keeping them updated. Manage, test and use the automations and attribute mappings created for the project CDE. Knowledge and awareness of the UK BIM Framework: BS1192, PAS1192 and ISO 19650 suite of standards and Government Construction Strategies Analytical & data driven mindset Keep a good communication with clients, suppliers and stakeholders. Deliver training for the project CDE systems. Create and manage documents on the project's CDE systems and ensure the correct folder structure and workflows are followed. Develop and keep updated the Information Control documentation and workflows for the project. Assist the Lead Information Controller in developing Infrastructure-wide information control documentation and plans. We are looking for: Support the information control process with a data-driven and automation focus. Awareness and importance of stakeholder engagement Knowledge and awareness of the UK BIM Framework: BS1192, PAS1192 and ISO 19650 suite of standards and Government Construction Strategies Good managerial and administrative skills Good organisational and communication skills Analytical & data driven mindset Ability to work alone or as part of a team Resilient and able to face challenges proactively, and report to senior management Experience working with Office suite including PowerBI and Office 365 Equal opportunities: We thrive through embracing differences, whether they be social backgrounds, ethnicity, disability, gender identity or expression, age, religion, sexual orientation, and any other protected characteristic - we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it Naturally Skanska. Flexible working: We welcome you to ask about flexibility at interview stage and we will explore what is possible for the role. Reasonable adjustments: We would like you to perform at your best at every stage of our recruitment process. Please contact us on if you require any adjustments that would support you throughout your application. More information about this role: Please note this is an advert for our Job vacancy, and therefore may not be inclusive of all assigned duties, responsibilities, or aspects of the role described, and may be amended at any time at the sole discretion of Skanska. For a full role profile, please contact us:
Sep 24, 2022
Full time
Description and requirements Skanska, a leading construction company and developer, is an inclusive and responsible business that is helping to build a better society. Known for many major projects, we are creating, upgrading and maintaining the country's buildings and infrastructure. Drawing on our Scandinavian heritage, we are green, innovative and progressive. We bring together people and technology, helping to make our industry safer and more collaborative. Our infrastructure team brings its design, build and refurbishment expertise to complex projects across the country. We form strong partnerships with clients and communities to deliver major infrastructure improvements like Crossrail, HS2, A14 and the M25 widening. We have an exciting opportunity for a Senior Information Controller to join us. Reporting to the Lead Information Controller, you will lead a project with one of our key customers. You will support the team with the management of information and the CDE throughout the project lifecycle. You will be responsible for leading the daily information exchange activities. You will ensure the coordination and dissemination of key project information to support delivery and drive efficiencies throughout the scheme. You'll: Deliver the project Information Control with a data-driven and automation focus. Manage the daily information exchange activities, including but not limited to issuing and receiving documents in accordance to ISO 19650 and/or any other standard requested by the client. Supporting the Lead Information Controller in managing the CDE system including it's configuration, folder structure and users. Generate reports and fill in dashboards keeping them updated. Manage, test and use the automations and attribute mappings created for the project CDE. Knowledge and awareness of the UK BIM Framework: BS1192, PAS1192 and ISO 19650 suite of standards and Government Construction Strategies Analytical & data driven mindset Keep a good communication with clients, suppliers and stakeholders. Deliver training for the project CDE systems. Create and manage documents on the project's CDE systems and ensure the correct folder structure and workflows are followed. Develop and keep updated the Information Control documentation and workflows for the project. Assist the Lead Information Controller in developing Infrastructure-wide information control documentation and plans. We are looking for: Support the information control process with a data-driven and automation focus. Awareness and importance of stakeholder engagement Knowledge and awareness of the UK BIM Framework: BS1192, PAS1192 and ISO 19650 suite of standards and Government Construction Strategies Good managerial and administrative skills Good organisational and communication skills Analytical & data driven mindset Ability to work alone or as part of a team Resilient and able to face challenges proactively, and report to senior management Experience working with Office suite including PowerBI and Office 365 Equal opportunities: We thrive through embracing differences, whether they be social backgrounds, ethnicity, disability, gender identity or expression, age, religion, sexual orientation, and any other protected characteristic - we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it Naturally Skanska. Flexible working: We welcome you to ask about flexibility at interview stage and we will explore what is possible for the role. Reasonable adjustments: We would like you to perform at your best at every stage of our recruitment process. Please contact us on if you require any adjustments that would support you throughout your application. More information about this role: Please note this is an advert for our Job vacancy, and therefore may not be inclusive of all assigned duties, responsibilities, or aspects of the role described, and may be amended at any time at the sole discretion of Skanska. For a full role profile, please contact us:
Job Title: Embedded Design Engineer Location: Whiteparish Salary: Competitive depending on skills and experience Type: Full Time, Permanent Lascar Electronics is a fast-growing international electronics business, with offices in the UK, USA and Hong Kong, specialising in the design and manufacture of data loggers, smart graphic displays and custom electronic products. An opportunity has arisen to join the design department working on data logging products, HMI displays and custom designs for the sensor market with a focus on embedded software and circuits using the latest technologies. The role involves all aspects of full product life cycle, conception, specification, development, testing and ongoing technical support. The projects are varied leading to an interesting role. About The Candidate: Successful applicants should have a passion for science and technology and be able to demonstrate knowledge through qualifications or work experience of: Developing embedded C firmware. Digital Circuit Design. Analogue Interface design. Low power design. IDE tools, in-circuit debuggers and emulators. Hardware debugging with the use of laboratory equipment such as Oscilloscopes and multimeters. Documentation including specification and testing. Version Control systems such as GIT. It would be beneficial to have specific experience with some of the following: ARM Cortex M series Microcontroller, preferably STM32/EFM32. 8051 microcontrollers. Development with Keil or GCC toolchains. Development using Eclipse, Simplicity Studio or Atollic True Studio IDEs. Interfacing to LCD displays. Communication technologies, RS232, RS485, USB, I2C, SPI, NFC and Bluetooth. Knowledge and use of sensors, temperature, humidity and gas. Benefits: In return we offer a competitive salary, together with an attractive benefits package. For further details or to apply, please send your CV together with a covering letter detailing your salary expectations. Please Note: Lascar only employs non-smokers/non-Vapers. Any approach from employment agencies will result in deselection from future recruitment opportunities. Candidates with the relevant experience/job titles of; Product Development, Designer, Product Design, Production Engineer, Design Engineering, Electronic Design, Digital Circuit Design, Analogue Interface Design, Software Engineer, Senior Software Engineer, Automotive Engineer, Electronics Engineer, Embedded Software Technician, C Developer, C# Software Developer, C++ Developer, C# Software Engineer, C++ will be considered for this role.
Nov 05, 2021
Full time
Job Title: Embedded Design Engineer Location: Whiteparish Salary: Competitive depending on skills and experience Type: Full Time, Permanent Lascar Electronics is a fast-growing international electronics business, with offices in the UK, USA and Hong Kong, specialising in the design and manufacture of data loggers, smart graphic displays and custom electronic products. An opportunity has arisen to join the design department working on data logging products, HMI displays and custom designs for the sensor market with a focus on embedded software and circuits using the latest technologies. The role involves all aspects of full product life cycle, conception, specification, development, testing and ongoing technical support. The projects are varied leading to an interesting role. About The Candidate: Successful applicants should have a passion for science and technology and be able to demonstrate knowledge through qualifications or work experience of: Developing embedded C firmware. Digital Circuit Design. Analogue Interface design. Low power design. IDE tools, in-circuit debuggers and emulators. Hardware debugging with the use of laboratory equipment such as Oscilloscopes and multimeters. Documentation including specification and testing. Version Control systems such as GIT. It would be beneficial to have specific experience with some of the following: ARM Cortex M series Microcontroller, preferably STM32/EFM32. 8051 microcontrollers. Development with Keil or GCC toolchains. Development using Eclipse, Simplicity Studio or Atollic True Studio IDEs. Interfacing to LCD displays. Communication technologies, RS232, RS485, USB, I2C, SPI, NFC and Bluetooth. Knowledge and use of sensors, temperature, humidity and gas. Benefits: In return we offer a competitive salary, together with an attractive benefits package. For further details or to apply, please send your CV together with a covering letter detailing your salary expectations. Please Note: Lascar only employs non-smokers/non-Vapers. Any approach from employment agencies will result in deselection from future recruitment opportunities. Candidates with the relevant experience/job titles of; Product Development, Designer, Product Design, Production Engineer, Design Engineering, Electronic Design, Digital Circuit Design, Analogue Interface Design, Software Engineer, Senior Software Engineer, Automotive Engineer, Electronics Engineer, Embedded Software Technician, C Developer, C# Software Developer, C++ Developer, C# Software Engineer, C++ will be considered for this role.
Job Title: Embedded Design Engineer Location: Whiteparish Salary: Competitive depending on skills and experience Type: Full Time, Permanent Lascar Electronics is a fast-growing international electronics business, with offices in the UK, USA and Hong Kong, specialising in the design and manufacture of data loggers, smart graphic displays and custom electronic products. An opportunity has arisen to join the design department working on data logging products, HMI displays and custom designs for the sensor market with a focus on embedded software and circuits using the latest technologies. The role involves all aspects of full product life cycle, conception, specification, development, testing and ongoing technical support. The projects are varied leading to an interesting role. About The Candidate: Successful applicants should have a passion for science and technology and be able to demonstrate knowledge through qualifications or work experience of: Developing embedded C firmware. Digital Circuit Design. Analogue Interface design. Low power design. IDE tools, in-circuit debuggers and emulators. Hardware debugging with the use of laboratory equipment such as Oscilloscopes and multimeters. Documentation including specification and testing. Version Control systems such as GIT. It would be beneficial to have specific experience with some of the following: ARM Cortex M series Microcontroller, preferably STM32/EFM32. 8051 microcontrollers. Development with Keil or GCC toolchains. Development using Eclipse, Simplicity Studio or Atollic True Studio IDEs. Interfacing to LCD displays. Communication technologies, RS232, RS485, USB, I2C, SPI, NFC and Bluetooth. Knowledge and use of sensors, temperature, humidity and gas. Benefits: In return we offer a competitive salary, together with an attractive benefits package. For further details or to apply, please send your CV together with a covering letter detailing your salary expectations. Please Note: Lascar only employs non-smokers/non-Vapers. Any approach from employment agencies will result in deselection from future recruitment opportunities. Candidates with the relevant experience/job titles of; Product Development, Designer, Product Design, Production Engineer, Design Engineering, Electronic Design, Digital Circuit Design, Analogue Interface Design, Software Engineer, Senior Software Engineer, Automotive Engineer, Electronics Engineer, Embedded Software Technician, C Developer, C# Software Developer, C++ Developer, C# Software Engineer, C++ will be considered for this role.
Oct 07, 2021
Full time
Job Title: Embedded Design Engineer Location: Whiteparish Salary: Competitive depending on skills and experience Type: Full Time, Permanent Lascar Electronics is a fast-growing international electronics business, with offices in the UK, USA and Hong Kong, specialising in the design and manufacture of data loggers, smart graphic displays and custom electronic products. An opportunity has arisen to join the design department working on data logging products, HMI displays and custom designs for the sensor market with a focus on embedded software and circuits using the latest technologies. The role involves all aspects of full product life cycle, conception, specification, development, testing and ongoing technical support. The projects are varied leading to an interesting role. About The Candidate: Successful applicants should have a passion for science and technology and be able to demonstrate knowledge through qualifications or work experience of: Developing embedded C firmware. Digital Circuit Design. Analogue Interface design. Low power design. IDE tools, in-circuit debuggers and emulators. Hardware debugging with the use of laboratory equipment such as Oscilloscopes and multimeters. Documentation including specification and testing. Version Control systems such as GIT. It would be beneficial to have specific experience with some of the following: ARM Cortex M series Microcontroller, preferably STM32/EFM32. 8051 microcontrollers. Development with Keil or GCC toolchains. Development using Eclipse, Simplicity Studio or Atollic True Studio IDEs. Interfacing to LCD displays. Communication technologies, RS232, RS485, USB, I2C, SPI, NFC and Bluetooth. Knowledge and use of sensors, temperature, humidity and gas. Benefits: In return we offer a competitive salary, together with an attractive benefits package. For further details or to apply, please send your CV together with a covering letter detailing your salary expectations. Please Note: Lascar only employs non-smokers/non-Vapers. Any approach from employment agencies will result in deselection from future recruitment opportunities. Candidates with the relevant experience/job titles of; Product Development, Designer, Product Design, Production Engineer, Design Engineering, Electronic Design, Digital Circuit Design, Analogue Interface Design, Software Engineer, Senior Software Engineer, Automotive Engineer, Electronics Engineer, Embedded Software Technician, C Developer, C# Software Developer, C++ Developer, C# Software Engineer, C++ will be considered for this role.
We're looking for a talented Senior Firmware Developer to work for our client. They want to recruit someone with demonstrable experience of the C programming language. If that's you then you could be exactly what they're looking for. ---- The Role: Reporting to the Device Intergration Team Manger and based in the company's Leister office, as the Senior Firmware Developer you will be primarily responsible for integrating sensors to the platform. In the job you'll be tasked with the following: - Performing unit testing - Documenting interfaces - Writing code in C - Developing for microprocessor with restrained resources - Battery and power management ---- The Candidate: The ideal candidate for this Senior Firmware Developer role will have relevant experience of the C programming language. You'll also need experience of: - Microcontrollers - Gpio - Battery and power management In addition, you'll need the following: - Experience using an esp32 SOC - GNSS experience - Uart experience Does that sound like you? If so, we'd love to see your resume. This position could be right for you if you want to work as either a Firmware Engineer or as a Firmware Dev. ---- The Package: Basic salary: Up to £70,000 per annum Benefits include: - Health and dental plan - Competitive salary - Group stock purchase plan ---- The Company: They are part of a Canadian group of companies, the only company in their space that do what they do within IoT and associated SaaS software and are looking for bright, committed and above all innovative applicant to help and drive the creation of their future environment in line with the company vision. They are a technology company set to create a shift change in the digitization of health and safety and productivity to connect and protect. As a business they've been around since 2014. They're a great company to work for. People join them for many reasons, such as they: - Are on the bleeding edge of technology - Have an employee focused environment - Are vital for the future of worker care The company works continuously to build a truly diverse and inclusive culture. They welcome and encourage candidates from all aspects of diversity to apply for this role. ---- Interested? If you think you're right for this Senior Firmware Developer role, then click the 'Apply Now' button, send us your resume and we'll consider you for the first round of interviews.Coburg Banks Limited is acting as an Employment Agency in relation to this vacancy.
Sep 09, 2021
Full time
We're looking for a talented Senior Firmware Developer to work for our client. They want to recruit someone with demonstrable experience of the C programming language. If that's you then you could be exactly what they're looking for. ---- The Role: Reporting to the Device Intergration Team Manger and based in the company's Leister office, as the Senior Firmware Developer you will be primarily responsible for integrating sensors to the platform. In the job you'll be tasked with the following: - Performing unit testing - Documenting interfaces - Writing code in C - Developing for microprocessor with restrained resources - Battery and power management ---- The Candidate: The ideal candidate for this Senior Firmware Developer role will have relevant experience of the C programming language. You'll also need experience of: - Microcontrollers - Gpio - Battery and power management In addition, you'll need the following: - Experience using an esp32 SOC - GNSS experience - Uart experience Does that sound like you? If so, we'd love to see your resume. This position could be right for you if you want to work as either a Firmware Engineer or as a Firmware Dev. ---- The Package: Basic salary: Up to £70,000 per annum Benefits include: - Health and dental plan - Competitive salary - Group stock purchase plan ---- The Company: They are part of a Canadian group of companies, the only company in their space that do what they do within IoT and associated SaaS software and are looking for bright, committed and above all innovative applicant to help and drive the creation of their future environment in line with the company vision. They are a technology company set to create a shift change in the digitization of health and safety and productivity to connect and protect. As a business they've been around since 2014. They're a great company to work for. People join them for many reasons, such as they: - Are on the bleeding edge of technology - Have an employee focused environment - Are vital for the future of worker care The company works continuously to build a truly diverse and inclusive culture. They welcome and encourage candidates from all aspects of diversity to apply for this role. ---- Interested? If you think you're right for this Senior Firmware Developer role, then click the 'Apply Now' button, send us your resume and we'll consider you for the first round of interviews.Coburg Banks Limited is acting as an Employment Agency in relation to this vacancy.
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
Oct 29, 2018
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
Oct 29, 2018
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
Oct 29, 2018
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
Oct 29, 2018
We are looking for a Software Engineer to specify, design, develop and test embedded software for complex medical systems for diagnostics, surgical, and drug delivery applications. Working for a Cambridge based company, many of the systems you will be working on will include electronics, optics, fluidics, robotics and UI components thus requiring an all-round engineering knowledge, attention to detail and good team work skills.Responsibilities* Working within a multidisciplinary team to develop software specifications and test protocols* Deliver high-quality code, according to specifications* Deliver high-quality design documentation according to medical regulations* Perform tests, code reviews, and other quality assurance tasks* Fast prototyping in support of proof of principle activities* Carrying out your specific project tasks within the timescales and budgets agreed with the project managerRequirements * An excellent degree in a relevant subject such as software engineering, electronics engineering or computer science* Excellent knowledge of either C or C++* Experience in developing real time embedded software on bare metal or by means of an RTOS* A working knowledge of how to interface microcontrollers with various sensors and actuators* Good communication and presentation skillsExperience in the following would be an advantage: * A background in control theory, digital signal processing or computer vision* Experience in programming under Windows, Linux, Android or iOS* Knowledge of another programming language or a scripting language* A background or experience in system modelling using UML or SysML* Experience with software development in a regulated industry (such as medical, nuclear or defence)
Senior Embedded Software Engineer
Sussex £ Excellent
An exciting opportunity for an experienced, creative and talented Senior Embedded Software Engineer to join this highly successful Company to join a small, dedicated team to develop Embedded Software for Digital Audio Systems.
Essential skills include: -
• 5+ years proven experience in Embedded Software design and
development
• Design and implementation of software for complex embedded
systems using multiple high performance microcontrollers
• Design and implementation of embedded software written in ‘C’
• Full product life-cycle experience
• Software Design Documentation
Highly desirable and advantageous would be experience of leadership and management skills within a small team, experience of RTOS, C++, Linux, IP and a good familiarity with Hardware
An excellent opportunity for an experienced Engineer with ability and a track record, being able to demonstrate clear ability to design complex, innovative new products
Sep 09, 2016
Senior Embedded Software Engineer
Sussex £ Excellent
An exciting opportunity for an experienced, creative and talented Senior Embedded Software Engineer to join this highly successful Company to join a small, dedicated team to develop Embedded Software for Digital Audio Systems.
Essential skills include: -
• 5+ years proven experience in Embedded Software design and
development
• Design and implementation of software for complex embedded
systems using multiple high performance microcontrollers
• Design and implementation of embedded software written in ‘C’
• Full product life-cycle experience
• Software Design Documentation
Highly desirable and advantageous would be experience of leadership and management skills within a small team, experience of RTOS, C++, Linux, IP and a good familiarity with Hardware
An excellent opportunity for an experienced Engineer with ability and a track record, being able to demonstrate clear ability to design complex, innovative new products
