PCB Design Engineer Permenant 40-65k + Car allowance and Bonus On site a chance to join a leading global consultancy within the Defence and Central Government sectors. You will recieve excellent training, career development and benifits are on offer within this organisation. We are looking for engineers with some experience and interest in one or more of the focus areas below: Essential: RF and analogue PCB circuit design and layout from VLF to microwave, including amplifiers, filters, mixers, etc. High speed digital PCB circuit design and layout, including FPGAs, SoCs, ADC & DACs Power supply design System and circuit modelling (eg using SPICE, Matlab, CST, Python) Any experience in the following areas would also be advantageous: Mechanical design with 3D CAD Lab instruments (eg oscilloscopes, spectrum analysers, vector network analysers) Design and test for EMC and environmental compliance Software and firmware development in support of testing or interfacing to electronics (eg Python, C/C++, VHDL, Linux) If you join us you will get the chance to deepen and broaden your skills further as you progress your career. You will work in a dynamic environment based on in multi-disciplinary project teams. Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Mar 28, 2024
Full time
PCB Design Engineer Permenant 40-65k + Car allowance and Bonus On site a chance to join a leading global consultancy within the Defence and Central Government sectors. You will recieve excellent training, career development and benifits are on offer within this organisation. We are looking for engineers with some experience and interest in one or more of the focus areas below: Essential: RF and analogue PCB circuit design and layout from VLF to microwave, including amplifiers, filters, mixers, etc. High speed digital PCB circuit design and layout, including FPGAs, SoCs, ADC & DACs Power supply design System and circuit modelling (eg using SPICE, Matlab, CST, Python) Any experience in the following areas would also be advantageous: Mechanical design with 3D CAD Lab instruments (eg oscilloscopes, spectrum analysers, vector network analysers) Design and test for EMC and environmental compliance Software and firmware development in support of testing or interfacing to electronics (eg Python, C/C++, VHDL, Linux) If you join us you will get the chance to deepen and broaden your skills further as you progress your career. You will work in a dynamic environment based on in multi-disciplinary project teams. Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
ELECTRONICS ENGINNER - WIRELESS Permenant 40-65k + Car allowance and Bonus On site a chance to join a leading global consultancy within the Defence and Central Government sectors. You will recieve excellent training, career development and benifits are on offer within this organisation. We are looking for engineers with some experience and interest in one or more of the focus areas below: Essential: RF and analogue PCB circuit design and layout from VLF to microwave, including amplifiers, filters, mixers, etc. High speed digital PCB circuit design and layout, including FPGAs, SoCs, ADC & DACs Power supply design System and circuit modelling (eg using SPICE, Matlab, CST, Python) Any experience in the following areas would also be advantageous: Mechanical design with 3D CAD Lab instruments (eg oscilloscopes, spectrum analysers, vector network analysers) Design and test for EMC and environmental compliance Software and firmware development in support of testing or interfacing to electronics (eg Python, C/C++, VHDL, Linux) If you join us you will get the chance to deepen and broaden your skills further as you progress your career. You will work in a dynamic environment based on in multi-disciplinary project teams. Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Mar 28, 2024
Full time
ELECTRONICS ENGINNER - WIRELESS Permenant 40-65k + Car allowance and Bonus On site a chance to join a leading global consultancy within the Defence and Central Government sectors. You will recieve excellent training, career development and benifits are on offer within this organisation. We are looking for engineers with some experience and interest in one or more of the focus areas below: Essential: RF and analogue PCB circuit design and layout from VLF to microwave, including amplifiers, filters, mixers, etc. High speed digital PCB circuit design and layout, including FPGAs, SoCs, ADC & DACs Power supply design System and circuit modelling (eg using SPICE, Matlab, CST, Python) Any experience in the following areas would also be advantageous: Mechanical design with 3D CAD Lab instruments (eg oscilloscopes, spectrum analysers, vector network analysers) Design and test for EMC and environmental compliance Software and firmware development in support of testing or interfacing to electronics (eg Python, C/C++, VHDL, Linux) If you join us you will get the chance to deepen and broaden your skills further as you progress your career. You will work in a dynamic environment based on in multi-disciplinary project teams. Damia Group Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept our Data Protection Policy which can be found on our website. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job. Damia Group is acting as an Employment Business in relation to this vacancy and in accordance to Conduct Regulations 2003.
Principal RF Engineer Basildon (4 - 5 days a week onsite) £50 - £60p/h inside IR35 (DOE) 6 months initially Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: You really must have: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
Mar 28, 2024
Contractor
Principal RF Engineer Basildon (4 - 5 days a week onsite) £50 - £60p/h inside IR35 (DOE) 6 months initially Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: You really must have: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
Industry Sectors: Electronics, Security, Industrial, Transportation Job Title: Senior Electronics & Embedded Software Engineer Location: Greater Manchester Salary: £50,000 - £65,000 per annum No Sponsorship is available Company Overview & Job Title: An established and award winning Cutting Edge Technology Engineering company located in Greater Manchester who specialize in the Industry for design, development and manufacturing for Security Technologies, Industrial, Transportation and many more have a new opening postion to recruit for a brand new Senior Electronics & Embedded Software Engineer to join the small and growing team. This is an exciting opportunity for career progression & development to grow and become a Technology Leader within this business is on offer for the Senior Electronics & Embedded Software Engineer . Salary on offer: The salary on offer for the Senior Electronics & Embedded Software Engineer is £50,000 - £65,000 per annum , depending on skillset & experience. Working arrangement: The Senior Electronics & Embedded Software Engineer will be required to work 4 days in the office and 1 day remote . The role: The successful Senior Electronics & Embedded Software Engineer will take lead for the design and development for Electronics & Embedded Software projects and products to an agreed requirement within agreed timescales. Key Skills: 5-7+ years minimum industry experience Experience in the full product development lifecycle - start to finish of products Electronics Circuit Design (analogue & digital) PCB Design & Schematic Capture Knowledge and experience of Embedded C, C++ Experience of microcontrollers & microprocessors Network interfaces - SPI, I2C, USB, UART, RS232/485, Modbus, TCP/IP, Wi-Fi BLE, RF etc Knowledge of FPGA's, GAL, PAL Chips Experience of DFM, DFT Ability to use test equipment - Oscilloscopes, multimeters, logic analysers or similar Practical skills - Prototyping, fault find, bench testing Good communication and team work skills Desirable nice to have skills: Knowledge of high and low level programming languages - Assembler, Python, Linux Knowledge of designing for harsh environments Knowledge and experience of EMC and LVD design approvals process Working with mechanical designers in 3D CAD to develop products Experience of team leadership, coaching, mentoring & project management Benefits Package - 25 Days Holiday, Pension Scheme, Work from home 1 day a week. If this is an exciting Electronics & Embedded Software Engineering role you're looking for as a great next step opportunity for you to be working on wide range of new and latest technologies, then please apply now with your updated CV or call Frank Kanjanda at Premier Group on and for further information about the role and company.
Mar 28, 2024
Full time
Industry Sectors: Electronics, Security, Industrial, Transportation Job Title: Senior Electronics & Embedded Software Engineer Location: Greater Manchester Salary: £50,000 - £65,000 per annum No Sponsorship is available Company Overview & Job Title: An established and award winning Cutting Edge Technology Engineering company located in Greater Manchester who specialize in the Industry for design, development and manufacturing for Security Technologies, Industrial, Transportation and many more have a new opening postion to recruit for a brand new Senior Electronics & Embedded Software Engineer to join the small and growing team. This is an exciting opportunity for career progression & development to grow and become a Technology Leader within this business is on offer for the Senior Electronics & Embedded Software Engineer . Salary on offer: The salary on offer for the Senior Electronics & Embedded Software Engineer is £50,000 - £65,000 per annum , depending on skillset & experience. Working arrangement: The Senior Electronics & Embedded Software Engineer will be required to work 4 days in the office and 1 day remote . The role: The successful Senior Electronics & Embedded Software Engineer will take lead for the design and development for Electronics & Embedded Software projects and products to an agreed requirement within agreed timescales. Key Skills: 5-7+ years minimum industry experience Experience in the full product development lifecycle - start to finish of products Electronics Circuit Design (analogue & digital) PCB Design & Schematic Capture Knowledge and experience of Embedded C, C++ Experience of microcontrollers & microprocessors Network interfaces - SPI, I2C, USB, UART, RS232/485, Modbus, TCP/IP, Wi-Fi BLE, RF etc Knowledge of FPGA's, GAL, PAL Chips Experience of DFM, DFT Ability to use test equipment - Oscilloscopes, multimeters, logic analysers or similar Practical skills - Prototyping, fault find, bench testing Good communication and team work skills Desirable nice to have skills: Knowledge of high and low level programming languages - Assembler, Python, Linux Knowledge of designing for harsh environments Knowledge and experience of EMC and LVD design approvals process Working with mechanical designers in 3D CAD to develop products Experience of team leadership, coaching, mentoring & project management Benefits Package - 25 Days Holiday, Pension Scheme, Work from home 1 day a week. If this is an exciting Electronics & Embedded Software Engineering role you're looking for as a great next step opportunity for you to be working on wide range of new and latest technologies, then please apply now with your updated CV or call Frank Kanjanda at Premier Group on and for further information about the role and company.
Applications Engineer £ 30 - 40k Oxford Hybrid My client is a successful company in their niche providing advanced tech solutions for the automotive industry. Due to sustained success, they're expanding their applications team. Main duties: + Design application solutions through new hardware and software development + Test & maintain hardware and software + Take ownership of your own projects and work as part of a team Skills and Experience Required: + Real-time firmware development in C/C++ + Knowledge of digital and analogue electronics + Experience of schematic capture & debugging circuits Bonus: + Good knowledge of C# + Good knowledge of multi-threaded development What you'll get: + £30-40k + Remote working option + Profit share bonus If you feel like you have the right skills and experience for this role, then please apply with a copy of your updated CV.
Mar 28, 2024
Full time
Applications Engineer £ 30 - 40k Oxford Hybrid My client is a successful company in their niche providing advanced tech solutions for the automotive industry. Due to sustained success, they're expanding their applications team. Main duties: + Design application solutions through new hardware and software development + Test & maintain hardware and software + Take ownership of your own projects and work as part of a team Skills and Experience Required: + Real-time firmware development in C/C++ + Knowledge of digital and analogue electronics + Experience of schematic capture & debugging circuits Bonus: + Good knowledge of C# + Good knowledge of multi-threaded development What you'll get: + £30-40k + Remote working option + Profit share bonus If you feel like you have the right skills and experience for this role, then please apply with a copy of your updated CV.
World Class Defence Organisation based in Stevenage, Hertfordshire (The role will be hybrid of working from home and onsite for the first few weeks and then will revert to a more remote basis) is currently looking to recruit 6x Hardware Design Engineer / Test Equipment Design Engineer subcontractors on an initial 12 month contract. The role will be hybrid of working from home and onsite for the first few weeks and then will revert to a more remote basis. This role would suit a candidate from the Defence / Aerospace industry who has a background in any of the following; Test Equipment Design, A.T.E Test Equipment Design, FPGA, Digital and Analogue Electronics. Hourly Rate: Completely Negotiable Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Test Equipment Design Engineer Job Description: An opportunity has arisen for a Test Equipment Engineer with drive and enthusiasm to join Europe's number one missile system provider, developing and designing Test Equipment solutions for the next generation of weapons. To provide support in the day to day running of Test Equipment product support activities. It will require complete management of the technical change through the engineering change process. To solve potentially complex technical problems from cradle to grave through the use of structured problem solving techniques. Wide ranging technical background with exposure from system level down to component level within numerous technical disciplines; including EMC, RF, Digital & Analogue, Video and Power supplies. Taking an active role in maintaining and modifying relevant engineering processes and procedures. Also working closely with managers to develop team improvements. Working across multiple projects and developing solutions for products at differing stages of maturity including prototyping, production and end-user equipment. Excellent communication skills are required to create and maintain working relationships with multi-disciplinary teams Skills and Experience: Excellent understanding of: Digital and Analogue Electronics (new and old) - Wiring diagrams and schedules - Microsoft products. Good understanding of: Instrument communication systems (GPIB /Lan / BCD) - Power control, power switching and supply regulation from DC to 3 phase - Interlock and safety related circuits on mechanical and electrical machines and safe working with low to medium power RF signals. Basic Understanding of: RF measurement techniques and equipment - Boundary scan (JTAG) test, diagnostics and programming - Firmware coding. Related competence in one or more of the following: The use of CAE Design tools - Negotiation of subsystem requirements with the systems teams - Writing Subsystem Requirement and associated documents - Ability to provide succinct and accurate reports and presentations Experienced Engineer in the design, integration and validation of test solutions for electronic / electro mechanical equipment and systems Ethernet / Power experience
Mar 28, 2024
Full time
World Class Defence Organisation based in Stevenage, Hertfordshire (The role will be hybrid of working from home and onsite for the first few weeks and then will revert to a more remote basis) is currently looking to recruit 6x Hardware Design Engineer / Test Equipment Design Engineer subcontractors on an initial 12 month contract. The role will be hybrid of working from home and onsite for the first few weeks and then will revert to a more remote basis. This role would suit a candidate from the Defence / Aerospace industry who has a background in any of the following; Test Equipment Design, A.T.E Test Equipment Design, FPGA, Digital and Analogue Electronics. Hourly Rate: Completely Negotiable Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Test Equipment Design Engineer Job Description: An opportunity has arisen for a Test Equipment Engineer with drive and enthusiasm to join Europe's number one missile system provider, developing and designing Test Equipment solutions for the next generation of weapons. To provide support in the day to day running of Test Equipment product support activities. It will require complete management of the technical change through the engineering change process. To solve potentially complex technical problems from cradle to grave through the use of structured problem solving techniques. Wide ranging technical background with exposure from system level down to component level within numerous technical disciplines; including EMC, RF, Digital & Analogue, Video and Power supplies. Taking an active role in maintaining and modifying relevant engineering processes and procedures. Also working closely with managers to develop team improvements. Working across multiple projects and developing solutions for products at differing stages of maturity including prototyping, production and end-user equipment. Excellent communication skills are required to create and maintain working relationships with multi-disciplinary teams Skills and Experience: Excellent understanding of: Digital and Analogue Electronics (new and old) - Wiring diagrams and schedules - Microsoft products. Good understanding of: Instrument communication systems (GPIB /Lan / BCD) - Power control, power switching and supply regulation from DC to 3 phase - Interlock and safety related circuits on mechanical and electrical machines and safe working with low to medium power RF signals. Basic Understanding of: RF measurement techniques and equipment - Boundary scan (JTAG) test, diagnostics and programming - Firmware coding. Related competence in one or more of the following: The use of CAE Design tools - Negotiation of subsystem requirements with the systems teams - Writing Subsystem Requirement and associated documents - Ability to provide succinct and accurate reports and presentations Experienced Engineer in the design, integration and validation of test solutions for electronic / electro mechanical equipment and systems Ethernet / Power experience
Electronics and Software Engineer Cambridge Salary: £35,000 - £50,000 Benefits: Extensive package incl. non-contributory pension and bonus scheme A fantastic opportunity for a versatile Electronics and Software Engineer has arisen at an exciting new technology development consultancy. This is very much a hands-on R&D Electronics Engineer / Hardware Design Engineer / Software Design Engineer role where you will be responsible for the entire product architecture. This will include dynamic projects to develop innovative electronic, electromechanical devices and instruments from concept to production for household name companies. This is a fascinating job where you will be developing a wide range of products which will truly change how we live our lives. As an Electronics and Software Engineer you will use your passion for innovation to develop concepts, technologies and products for global leaders in sectors including the Medical Devices and Consumer Technology Products marketplace. Projects are highly varied and involve all areas of electronic device development including digital design, analogue / analog design, advanced power electronics and embedded software. You will work alongside senior technical and commercial business leaders to address client needs, creating bespoke devices in often challenging (and ultimately highly rewarding) development programmes. We are looking for both recent () graduates with salary expectations of around £35k+, and more experienced Engineers with 3-5 years' experience looking for circa £45-50k. A good degree in Electronics Engineering is essential along with the ability, aptitude and passion to deliver scientific / engineering innovation and cutting-edge solutions. Requirements: A 1st or 2:1 BSc, BEng, MEng in Electronics Engineering from a leading university (UK top 10 or equivalent) Industrial experience of hands-on electronic circuit and embedded software design from concept through to manufacture Experience with lab test equipment Experience of medical or safety-critical device development would be advantageous Commercially astute with an aptitude for building client relationships and delivering excellent work on time and budget Great analytical, mathematical and computing skills Eligibility to work in the UK without restrictions Job/vacancy location: Cambridge (commutable from Newmarket, Huntingdon, St Neots, Newmarket, Royston, Bury St Edmunds, Stevenage, etc)
Mar 27, 2024
Full time
Electronics and Software Engineer Cambridge Salary: £35,000 - £50,000 Benefits: Extensive package incl. non-contributory pension and bonus scheme A fantastic opportunity for a versatile Electronics and Software Engineer has arisen at an exciting new technology development consultancy. This is very much a hands-on R&D Electronics Engineer / Hardware Design Engineer / Software Design Engineer role where you will be responsible for the entire product architecture. This will include dynamic projects to develop innovative electronic, electromechanical devices and instruments from concept to production for household name companies. This is a fascinating job where you will be developing a wide range of products which will truly change how we live our lives. As an Electronics and Software Engineer you will use your passion for innovation to develop concepts, technologies and products for global leaders in sectors including the Medical Devices and Consumer Technology Products marketplace. Projects are highly varied and involve all areas of electronic device development including digital design, analogue / analog design, advanced power electronics and embedded software. You will work alongside senior technical and commercial business leaders to address client needs, creating bespoke devices in often challenging (and ultimately highly rewarding) development programmes. We are looking for both recent () graduates with salary expectations of around £35k+, and more experienced Engineers with 3-5 years' experience looking for circa £45-50k. A good degree in Electronics Engineering is essential along with the ability, aptitude and passion to deliver scientific / engineering innovation and cutting-edge solutions. Requirements: A 1st or 2:1 BSc, BEng, MEng in Electronics Engineering from a leading university (UK top 10 or equivalent) Industrial experience of hands-on electronic circuit and embedded software design from concept through to manufacture Experience with lab test equipment Experience of medical or safety-critical device development would be advantageous Commercially astute with an aptitude for building client relationships and delivering excellent work on time and budget Great analytical, mathematical and computing skills Eligibility to work in the UK without restrictions Job/vacancy location: Cambridge (commutable from Newmarket, Huntingdon, St Neots, Newmarket, Royston, Bury St Edmunds, Stevenage, etc)
Meridian Business Support
Newcastle, Staffordshire
Meridian Business Support is recruiting for a Test Engineer to work for one of prestigious, state of the art, Manufacturing clients. The role will include providing first class customer service to prospective and existing clients. About the Role: As a Test Engineer, you will be testing products, diagnosing faults and will be capable of implementing, developing and improving manufacturing test strategies using standard tools and methodologies. Main responsibilities: To test printed circuit boards and unit assemblies with diagnosis of complex faults at circuit board, unit and system level. (This will include voltages up to 20kV) To diagnose test failures from the above - down to PCBA and component level. To help develop new test equipment and methodologies where required in line with our New Product Introduction (NPI) process. To assist in the selection of new test equipment. To assist in improving test processes. To assist with test issues within manufacturing where necessary. To provide cost effective test solutions for the manufacturing process (from circuit board to system level solutions) To take a lead role on specific projects and at times being responsible for coordinating a small group of Test Engineers. Essential: Experience in testing within a manufacturing environment Educated to Degree / HND or HNC in Electrical / Electronic Engineering Background knowledge of analogue, digital and RF electronics Skilled in fault diagnosis to component level utilising basic test instruments Confidently test safely Problem solving Analytical thinker Able to travel occasionally for training or to customer sites Able to work to deadlines Good communication skills Desirable: Ability to design, develop and build bespoke test circuitry An understanding of PCA manufacturing (Surface mount & plated through hole) Portable appliance testing Flexible Location: Newcastle-under-Lyme, Staffordshire, UK Hours: 39 hours per week Monday to Thursday - 7am to 4pm or 7.45am to 4.45pm Friday - 7am to 12pm or 7.45am to 12.45pm Salary: £30,000 per annum Holidays: 20 days plus Bank Holidays Benefits: Bonus scheme based on company performance Company laptop and mobile phone Company sick pay Workplace pension scheme enrolment from day one Onsite parking Summer and Christmas parties Please call us to apply this excellent role today!
Mar 27, 2024
Full time
Meridian Business Support is recruiting for a Test Engineer to work for one of prestigious, state of the art, Manufacturing clients. The role will include providing first class customer service to prospective and existing clients. About the Role: As a Test Engineer, you will be testing products, diagnosing faults and will be capable of implementing, developing and improving manufacturing test strategies using standard tools and methodologies. Main responsibilities: To test printed circuit boards and unit assemblies with diagnosis of complex faults at circuit board, unit and system level. (This will include voltages up to 20kV) To diagnose test failures from the above - down to PCBA and component level. To help develop new test equipment and methodologies where required in line with our New Product Introduction (NPI) process. To assist in the selection of new test equipment. To assist in improving test processes. To assist with test issues within manufacturing where necessary. To provide cost effective test solutions for the manufacturing process (from circuit board to system level solutions) To take a lead role on specific projects and at times being responsible for coordinating a small group of Test Engineers. Essential: Experience in testing within a manufacturing environment Educated to Degree / HND or HNC in Electrical / Electronic Engineering Background knowledge of analogue, digital and RF electronics Skilled in fault diagnosis to component level utilising basic test instruments Confidently test safely Problem solving Analytical thinker Able to travel occasionally for training or to customer sites Able to work to deadlines Good communication skills Desirable: Ability to design, develop and build bespoke test circuitry An understanding of PCA manufacturing (Surface mount & plated through hole) Portable appliance testing Flexible Location: Newcastle-under-Lyme, Staffordshire, UK Hours: 39 hours per week Monday to Thursday - 7am to 4pm or 7.45am to 4.45pm Friday - 7am to 12pm or 7.45am to 12.45pm Salary: £30,000 per annum Holidays: 20 days plus Bank Holidays Benefits: Bonus scheme based on company performance Company laptop and mobile phone Company sick pay Workplace pension scheme enrolment from day one Onsite parking Summer and Christmas parties Please call us to apply this excellent role today!
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
Mar 26, 2024
Full time
We are recruiting a Systems Engineer to join the Application Engineering Team within the Engineering Department. Reporting to the Application Engineering Manager, the role of Systems Engineer has significant responsibility of developing complex and sophisticated engineering solutions using company products to meet customer needs. The role is responsible for executing all technical aspects of engineering projects including assessing customer requirements, developing customer hardware and software solutions, supporting customers, and writing technical documentation. The role requires an expert understanding of the functionality and use of the company's products and how to adapt them for new applications. Expertise / Technical Competence Technical Analysis : Able to investigate and understand complex technical issues and problems. Ensure issues are managed appropriately. Systems Design : Competent using system analysis tools (UML, Data Flow, FMEA, etc.) to analyse customer needs, system requirements, capability, and cost to determine project feasibility. Able to lead the integration of complex systems and development of system validation plans. Project Management: Experience in managing more than 3 concurrent projects; planning, tracking and manage development tasks. Work to deadlines and adapt plans as necessary to meet project objectives. Work collaboratively with customers and internal departments to successfully achieve outcomes and results. Health and Safety : Experience of performing system safety assessments and product safety certifications. Technical Documentation: Experience of writing technical documentation from non-technical customer input and writing documentation that allows non-technical people to understand the technical solution we are providing. Candidates should be competent with some of the following: Degree qualification in suitable discipline electronics or equivalent 2:1 or better Electronics Design A good knowledge of product design from feasibility to production, including digital and analogue circuits, microprocessor circuits and PCB design. Firmware Development A good knowledge of C, C++ programming languages and real time operating systems. Mechanical Design A good knowledge of mechanical design for products, including frames and housings, and for product testing equipment. Navigation Concepts and Kinematics Understanding of navigation concepts such as kinematic equations and hardware components used in navigation, such as IMUs and GPS/GNSS. Software Development Have a good knowledge of C++ and C# programming languages, WPF and XAML. Able to lead the development of Software applications and GUI covering the full software life cycle. IoT and SaaS Knowledge of application programming interfaces (APIs) that connect devices to the Internet, along with other key IoT technologies such as Big Data management tools, predictive analytics, AI and machine learning, the cloud, and radio-frequency identification (RFID). Product Compliance An expert knowledge of design for manufacture and product approval processes. Quality Assurance Development and implementation of quality assurance and regulatory compliance procedures for products. Please note: Only candidates with the relevant skills and experience will be contacted regarding this position. If you do not hear back from us within 5 days you have unfortunately been unsuccessful in your application for this position, however we may contact you in the future to discuss other opportunities. Please note: That no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and abilities to perform the duties of the job.
World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a RF Digital Waveform Design Engineer / RF Design Engineer on a 12 Month contract. The role will be a hybrid role of being onsite for 2-3 days per week and the rest working from home. Hourly Rate: £75.00ph Contract Duration: 12 Months initially and then ongoing thereafter. RF Design Engineer Job Description: This role is to work on a new seeker with a fast paced programme within a dynamic team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales. Rapid design and development of analogue & high-speed digital circuits which will be used in multimode seeker applications Perform development test and integration activities on circuits and sub-assemblies in accordance with all relevant processes, standards and requirements Produce and maintain test documentation associated with seeker hardware, including specifications, development test schedules and test result sheets. Interact with internal customers and suppliers to understand circuit design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements Oversee the transition of development hardware into series production, including robustness testing and qualification testing Perform technical investigations to provide data for problem assessment, design improvements and support development of solutions to technical issues Provide technical advice and assistance in to engineering manager Skillset/experience required: Candidates must have experience of the following; Analogue & High-speed Digital Circuit Design Design, Simulation & Layout using Zuken FPGA/CPLD Circuit Design and Simulation using Xilinx ISE, Vivado, Libero, and others Perform design proving test and trials in laboratory Diagnose hardware problems using various methods; e.g. visual inspection, signal/data analysis in design Knowledge of mixed signal board techniques Awareness of manufacturing techniques and capabilities Appreciation of mechanical design & module packaging Clear understanding of engineering tools, processes and procedures Be conversant with design tools including Zuken, Orcad, LTSpice, and others Be able to write high quality test requirements and test reports Consistent ability to deliver required output within agreed timescales Ideally degree qualified or equivalent with modules relating to RF or electronics Essential to have some experience of product lifecycles from concept through to production. Essential be to be able to produce high quality written reports Desirable to have radar experience with hardware implementation
Mar 26, 2024
Full time
World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a RF Digital Waveform Design Engineer / RF Design Engineer on a 12 Month contract. The role will be a hybrid role of being onsite for 2-3 days per week and the rest working from home. Hourly Rate: £75.00ph Contract Duration: 12 Months initially and then ongoing thereafter. RF Design Engineer Job Description: This role is to work on a new seeker with a fast paced programme within a dynamic team to develop high speed circuits. This requires an engineer with broad skills in mixed-signal electronic design with an appreciation of radar systems and also good understanding of programmable devices (FPGAs/CPLDs). The engineer must have a high degree of enthusiasm and a determination to deliver products to the right standard within the required timescales. Rapid design and development of analogue & high-speed digital circuits which will be used in multimode seeker applications Perform development test and integration activities on circuits and sub-assemblies in accordance with all relevant processes, standards and requirements Produce and maintain test documentation associated with seeker hardware, including specifications, development test schedules and test result sheets. Interact with internal customers and suppliers to understand circuit design requirements, volume constraints and environmental specifications so that the final design is compliant with the overall requirements Oversee the transition of development hardware into series production, including robustness testing and qualification testing Perform technical investigations to provide data for problem assessment, design improvements and support development of solutions to technical issues Provide technical advice and assistance in to engineering manager Skillset/experience required: Candidates must have experience of the following; Analogue & High-speed Digital Circuit Design Design, Simulation & Layout using Zuken FPGA/CPLD Circuit Design and Simulation using Xilinx ISE, Vivado, Libero, and others Perform design proving test and trials in laboratory Diagnose hardware problems using various methods; e.g. visual inspection, signal/data analysis in design Knowledge of mixed signal board techniques Awareness of manufacturing techniques and capabilities Appreciation of mechanical design & module packaging Clear understanding of engineering tools, processes and procedures Be conversant with design tools including Zuken, Orcad, LTSpice, and others Be able to write high quality test requirements and test reports Consistent ability to deliver required output within agreed timescales Ideally degree qualified or equivalent with modules relating to RF or electronics Essential to have some experience of product lifecycles from concept through to production. Essential be to be able to produce high quality written reports Desirable to have radar experience with hardware implementation
Position: Junior Electronics Software Engineer Location of Office: Blackburn Location of work: This is an office-based role. Salary: £30,000 - £40,000 The role: A position is now available for a Junior Electronics Software Engineer to join an engineering team to work towards the development of a new range of industry leading IoT connected security devices. Our client is an established R&D focused business, with a stellar reputation built upon providing cutting edge, industry leading products for the last 20+ years. This role is for a Junior Electronics Software Engineer who has a relevant degree qualification and some industry experience, this can be as work experience or after graduation. You will be given the chance to work in a role where you will get experience across analogue and digital circuit design, PCB layout, Embedded programming, circuit prototyping and test. This role will be ideal for a Junior Electronics Software Engineer who is looking to work in a range of electronics disciplines with a keen eye for detail who is comfortable working in a dynamic, fast paced environment. You will be working in an experienced team, so there will be plenty of opportunity to learn and develop new skills so can expect plenty of variety in the role and chance to develop your skills quickly and with support from experienced Engineers. Experience or knowledge of the following is required: PCB design and layout - Altium Circuit prototyping and test Embedded C coding Degree qualification in relevant Engineering subject Desirable experience: RF design Microcontroller design - ARM, PIC, Atmel etc IoT connected devices If you are keen to build your career within a new product development focussed business who are leaders in their industry the contact Laurence Powell or Chris Fawcett from KO2 embedded recruitment solutions for all the details.
Mar 26, 2024
Full time
Position: Junior Electronics Software Engineer Location of Office: Blackburn Location of work: This is an office-based role. Salary: £30,000 - £40,000 The role: A position is now available for a Junior Electronics Software Engineer to join an engineering team to work towards the development of a new range of industry leading IoT connected security devices. Our client is an established R&D focused business, with a stellar reputation built upon providing cutting edge, industry leading products for the last 20+ years. This role is for a Junior Electronics Software Engineer who has a relevant degree qualification and some industry experience, this can be as work experience or after graduation. You will be given the chance to work in a role where you will get experience across analogue and digital circuit design, PCB layout, Embedded programming, circuit prototyping and test. This role will be ideal for a Junior Electronics Software Engineer who is looking to work in a range of electronics disciplines with a keen eye for detail who is comfortable working in a dynamic, fast paced environment. You will be working in an experienced team, so there will be plenty of opportunity to learn and develop new skills so can expect plenty of variety in the role and chance to develop your skills quickly and with support from experienced Engineers. Experience or knowledge of the following is required: PCB design and layout - Altium Circuit prototyping and test Embedded C coding Degree qualification in relevant Engineering subject Desirable experience: RF design Microcontroller design - ARM, PIC, Atmel etc IoT connected devices If you are keen to build your career within a new product development focussed business who are leaders in their industry the contact Laurence Powell or Chris Fawcett from KO2 embedded recruitment solutions for all the details.
Position: Electronics Software Engineer Location of Office: Blackburn Location of work: This is an office-based role. Salary: £30,000 - £40,000 The role: A position is now available for an Electronics Software Engineer to join an engineering team to work towards the development of a new range of industry leading IoT connected security devices. Our client is an established R&D focused business, with a stellar reputation built upon providing cutting edge, industry leading products for the last 20+ years. This role is for an Electronics Software Engineer who has a relevant degree qualification and some industry experience, this can be as work experience or after graduation. You will be given the chance to work in a role where you will get experience across analogue and digital circuit design, PCB layout, Embedded programming, circuit prototyping and test. This role will be ideal for an Electronics Software Engineer who is looking to work in a range of electronics disciplines with a keen eye for detail who is comfortable working in a dynamic, fast paced environment. You will be working in an experienced team, so there will be plenty of opportunity to learn and develop new skills so can expect plenty of variety in the role and chance to develop your skills quickly and with support from experienced Engineers. Experience or knowledge of the following is required: PCB design and layout - Altium Circuit prototyping and test Embedded C coding Degree qualification in relevant Engineering subject Desirable experience: RF design Microcontroller design - ARM, PIC, Atmel etc IoT connected devices If you are keen to build your career within a new product development focussed business who are leaders in their industry the contact Laurence Powell or Chris Fawcett from KO2 embedded recruitment solutions for all the details.
Mar 26, 2024
Full time
Position: Electronics Software Engineer Location of Office: Blackburn Location of work: This is an office-based role. Salary: £30,000 - £40,000 The role: A position is now available for an Electronics Software Engineer to join an engineering team to work towards the development of a new range of industry leading IoT connected security devices. Our client is an established R&D focused business, with a stellar reputation built upon providing cutting edge, industry leading products for the last 20+ years. This role is for an Electronics Software Engineer who has a relevant degree qualification and some industry experience, this can be as work experience or after graduation. You will be given the chance to work in a role where you will get experience across analogue and digital circuit design, PCB layout, Embedded programming, circuit prototyping and test. This role will be ideal for an Electronics Software Engineer who is looking to work in a range of electronics disciplines with a keen eye for detail who is comfortable working in a dynamic, fast paced environment. You will be working in an experienced team, so there will be plenty of opportunity to learn and develop new skills so can expect plenty of variety in the role and chance to develop your skills quickly and with support from experienced Engineers. Experience or knowledge of the following is required: PCB design and layout - Altium Circuit prototyping and test Embedded C coding Degree qualification in relevant Engineering subject Desirable experience: RF design Microcontroller design - ARM, PIC, Atmel etc IoT connected devices If you are keen to build your career within a new product development focussed business who are leaders in their industry the contact Laurence Powell or Chris Fawcett from KO2 embedded recruitment solutions for all the details.
Ideal Personnel and Recruitment Solutions
Milton Keynes, Buckinghamshire
Our well-established, global client has a permanent vacancy for an Electronic Hardware Engineer with experience in digital and analogue circuit design. You will have the opportunity to become involved with the most relevant product development phases including circuit design, creation of specifications, schematics, design simulation, PCB layout and design, testing and troubleshooting. Additional duties will involve supporting electronic and electrical development of test and production jigs as well as providing technical product support to European subsidiaries. The role will be part of the Development Group in the Electrical section. The Development team is rapidly expanding, providing the opportunity to influence the direction and manner of growth, as well as the extensive personal development of those who join. As part of our global development team, led by Japan, they are focused on delivering solutions to customers that are innovative, reliable and future proof. Essential Requirements: • 3+ years' experience with Analogue and Digital Electronic design • Experience of circuit simulation software such as LTspice • Experience with PCB design • Ability to plan and manage own projects • Experience of writing technical reports and electronic documentation • To work as part of a multicultural team who deliver results by consensus • Passport and Driving licenses required, as there will be some UK and European travel in the role. Desirable: • Electrical, Electronics or Electromechanical Engineering degree at 2.1 level or higher • Experience of working for a multinational company • Strong verbal and written communication skills • European or Japanese language skills • Knowledge of standards and directives such as EMC, MD, Safety, ATEX, etc • Experience with ZUKEN / CR-8000 PCB design software Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.
Mar 26, 2024
Full time
Our well-established, global client has a permanent vacancy for an Electronic Hardware Engineer with experience in digital and analogue circuit design. You will have the opportunity to become involved with the most relevant product development phases including circuit design, creation of specifications, schematics, design simulation, PCB layout and design, testing and troubleshooting. Additional duties will involve supporting electronic and electrical development of test and production jigs as well as providing technical product support to European subsidiaries. The role will be part of the Development Group in the Electrical section. The Development team is rapidly expanding, providing the opportunity to influence the direction and manner of growth, as well as the extensive personal development of those who join. As part of our global development team, led by Japan, they are focused on delivering solutions to customers that are innovative, reliable and future proof. Essential Requirements: • 3+ years' experience with Analogue and Digital Electronic design • Experience of circuit simulation software such as LTspice • Experience with PCB design • Ability to plan and manage own projects • Experience of writing technical reports and electronic documentation • To work as part of a multicultural team who deliver results by consensus • Passport and Driving licenses required, as there will be some UK and European travel in the role. Desirable: • Electrical, Electronics or Electromechanical Engineering degree at 2.1 level or higher • Experience of working for a multinational company • Strong verbal and written communication skills • European or Japanese language skills • Knowledge of standards and directives such as EMC, MD, Safety, ATEX, etc • Experience with ZUKEN / CR-8000 PCB design software Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.
Product Development Manager Role Overview Our client is a founder and innovator of sensing and monitoring systems that have helped save countless lives across the globe for over forty years. They are currently seeking a Product Development Manager to build, lead and manage the Product Development team across the research, development and delivery of new products as well as the upgrade, design maintenance of existing products. This role will be based at our client's office in Kent, but may require occasional travel in Europe / the Far East. Key Responsibilities Functional: Manage and lead team members including line management, day-to-day work, recruitment, training and development Manage and lead engineering project prioritisation & assignment Manage engineering resource loading and forecasting Manage product overall cost and timing informed by commercial awareness Manage and lead the research and development of innovative technologies and products Manage and lead product development & introduction Manage product upgrades & changes Manage and lead projects through engineering phases and approvals Facilitate and steering with of product introduction with other departments Manage and lead product verification, validation and certification Manage, lead and approve product documentation and technical submissions to product board Manage, lead and negotiate supplier and engineering or testing services including acquisition and strategies Support product roadmaps and strategies and lead from technology and achievability perspectives Manage engineering process improvement Technical: Optical and image processing knowledge Video/audio signal formats analogue/digital formats and processing Analog and digital circuit design and development, including microprocessors, digital signal processing and design for EMC Digital communication protocols e.g. I2C, SPI, RS232, RS485, CAN, Ethernet etc. Systems, software & hardware interface and software engineering Digital signal processing and data storage media LCD interface and panel design PCB level troubleshooting and product fault finding Understanding mechanical design methods and material selection Implement design for manufacturing Lean manufacturing techniques helping our supplier base develop efficiencies Experience and Skills Required Essential experience: Minimum 8 years' practical experience with electronics and mechanical product development, preferably within the Automotive field throughout the product development life cycle Minimum of 3 years' people management experience Commercial awareness of project and product cost and timing Extensive knowledge of analogue and digital electronics including microprocessors, DSP, video signal processing and RF technology Knowledge of camera, optics, acoustics, LCDs and digital recording technologies Knowledge of modern automotive electronic architecture, multiplex communication protocols and systems Computer application skills: Microsoft Outlook, Excel, Word, MCAD & ECAD & PCB development tools, electronic circuit simulation programs Experience with supplier management, preferably with Far Eastern low-cost manufacturing Genuine interest in modern technology, preferably with in the Automotive industry Experience with providing direction for decision making Desirable experience: Product development for the detection of traffic situations, people, cyclists and objects and sensors within the Automotive domain DSP and algorithm development Digital recording technology Video Display based on LCD technology Camera and optics Acoustics Education, Qualifications and Training Essential: Bachelor of Engineering (Electronics or similar) or other relevant qualifications and experience Desirable: Master of Engineering in Electronic product development or similar People and project management training or qualification(s)
Mar 25, 2024
Full time
Product Development Manager Role Overview Our client is a founder and innovator of sensing and monitoring systems that have helped save countless lives across the globe for over forty years. They are currently seeking a Product Development Manager to build, lead and manage the Product Development team across the research, development and delivery of new products as well as the upgrade, design maintenance of existing products. This role will be based at our client's office in Kent, but may require occasional travel in Europe / the Far East. Key Responsibilities Functional: Manage and lead team members including line management, day-to-day work, recruitment, training and development Manage and lead engineering project prioritisation & assignment Manage engineering resource loading and forecasting Manage product overall cost and timing informed by commercial awareness Manage and lead the research and development of innovative technologies and products Manage and lead product development & introduction Manage product upgrades & changes Manage and lead projects through engineering phases and approvals Facilitate and steering with of product introduction with other departments Manage and lead product verification, validation and certification Manage, lead and approve product documentation and technical submissions to product board Manage, lead and negotiate supplier and engineering or testing services including acquisition and strategies Support product roadmaps and strategies and lead from technology and achievability perspectives Manage engineering process improvement Technical: Optical and image processing knowledge Video/audio signal formats analogue/digital formats and processing Analog and digital circuit design and development, including microprocessors, digital signal processing and design for EMC Digital communication protocols e.g. I2C, SPI, RS232, RS485, CAN, Ethernet etc. Systems, software & hardware interface and software engineering Digital signal processing and data storage media LCD interface and panel design PCB level troubleshooting and product fault finding Understanding mechanical design methods and material selection Implement design for manufacturing Lean manufacturing techniques helping our supplier base develop efficiencies Experience and Skills Required Essential experience: Minimum 8 years' practical experience with electronics and mechanical product development, preferably within the Automotive field throughout the product development life cycle Minimum of 3 years' people management experience Commercial awareness of project and product cost and timing Extensive knowledge of analogue and digital electronics including microprocessors, DSP, video signal processing and RF technology Knowledge of camera, optics, acoustics, LCDs and digital recording technologies Knowledge of modern automotive electronic architecture, multiplex communication protocols and systems Computer application skills: Microsoft Outlook, Excel, Word, MCAD & ECAD & PCB development tools, electronic circuit simulation programs Experience with supplier management, preferably with Far Eastern low-cost manufacturing Genuine interest in modern technology, preferably with in the Automotive industry Experience with providing direction for decision making Desirable experience: Product development for the detection of traffic situations, people, cyclists and objects and sensors within the Automotive domain DSP and algorithm development Digital recording technology Video Display based on LCD technology Camera and optics Acoustics Education, Qualifications and Training Essential: Bachelor of Engineering (Electronics or similar) or other relevant qualifications and experience Desirable: Master of Engineering in Electronic product development or similar People and project management training or qualification(s)
The Client: We have an excellent opportunity for a Digital Hardware Engineer to join our client who is a well-established scientific company-based Hertfordshire. The Digital Hardware Engineer will join the development team to design our clients next range of instruments. We are looking for an engineer with a broad range of skills in both analogue and digital electronics. What's needed for me to be considered for the Digital Hardware Engineer role ? A degree in Electronics or physics is desirable but not essential. A proven record in digital hardware and embedded software Good understanding of A to D converters Familiar with serial interfaces such as I2C, SPI, USB, RS232 An understanding of low-pressure gas circuits would be an advantage as the candidate will be expected to learn about infrared gas analysis design. What next? Apply today to be considered for this Digital Hardware Engineer opportunity. If suitable, one of our specialist consultants will be in contact to discuss the Digital Hardware Engineer opportunity with you in detail prior to submitting your CV to the client. In this discussion we will aim to identify your specific skills and motivations, and where appropriate recommend other relevant opportunities to you that match your requirements. Additionally, refer a friend or colleague to us and receive £200 in vouchers if we assist them in securing a new career.
Mar 24, 2024
Full time
The Client: We have an excellent opportunity for a Digital Hardware Engineer to join our client who is a well-established scientific company-based Hertfordshire. The Digital Hardware Engineer will join the development team to design our clients next range of instruments. We are looking for an engineer with a broad range of skills in both analogue and digital electronics. What's needed for me to be considered for the Digital Hardware Engineer role ? A degree in Electronics or physics is desirable but not essential. A proven record in digital hardware and embedded software Good understanding of A to D converters Familiar with serial interfaces such as I2C, SPI, USB, RS232 An understanding of low-pressure gas circuits would be an advantage as the candidate will be expected to learn about infrared gas analysis design. What next? Apply today to be considered for this Digital Hardware Engineer opportunity. If suitable, one of our specialist consultants will be in contact to discuss the Digital Hardware Engineer opportunity with you in detail prior to submitting your CV to the client. In this discussion we will aim to identify your specific skills and motivations, and where appropriate recommend other relevant opportunities to you that match your requirements. Additionally, refer a friend or colleague to us and receive £200 in vouchers if we assist them in securing a new career.
Mellis Blue Accountancy Recruitment
Cambridge, Cambridgeshire
Head of Electronics Cambridge £100-110K plus bonus (company performance related typically pays 5-6%), pension, private healthcare, dental plan, income protection plan, free parking, great restaurant facilities and an early finish on Fridays! Head of Electronics: Interdepartmental communication skills and gravitas to lead multi-disciplinary teams and drive next generation electronic product development from concept through to delivery in medium volume manufacturing environments People management experience Highly technical hands-on background in electronic hardware product development, including hardware architecture (baseband, RF, analogue, high speed digital design) Innovation, continuous improvement and change management Vibrant hands-on Head of Electronics required with the technical gravitas and proven leadership abilities for upskilling an established electronics team for the delivery of technically challenging next generation product developments in the wireless communications space. You will join a thriving business, shaping the way the RF and baseband teams deliver products to market. As Head of Electronics, you will provide the vision, technical strategic direction and manage your teams through the change in technology, all the while keeping a continuous improvement focus for a team of 20+ Engineers in an Agile/Waterfall environment. Don't miss out on this exciting opportunity to work for a highly regarded and thriving business operating in the Cambridge community. Apply now! Candidates searching for the following job titles are also likely to be interested in this role: Head of Hardware Senior Electronics Manager Hardware Manager Engineering ManagerFor full company details and job specification for this unique role please email your CV now.We o Understand your specific requirements and career aspirationso Guarantee to keep you updatedo Provide full pre-interview preparation and post-interview de-briefingo We guarantee not to approach any company without consulting you first!
Mar 24, 2024
Full time
Head of Electronics Cambridge £100-110K plus bonus (company performance related typically pays 5-6%), pension, private healthcare, dental plan, income protection plan, free parking, great restaurant facilities and an early finish on Fridays! Head of Electronics: Interdepartmental communication skills and gravitas to lead multi-disciplinary teams and drive next generation electronic product development from concept through to delivery in medium volume manufacturing environments People management experience Highly technical hands-on background in electronic hardware product development, including hardware architecture (baseband, RF, analogue, high speed digital design) Innovation, continuous improvement and change management Vibrant hands-on Head of Electronics required with the technical gravitas and proven leadership abilities for upskilling an established electronics team for the delivery of technically challenging next generation product developments in the wireless communications space. You will join a thriving business, shaping the way the RF and baseband teams deliver products to market. As Head of Electronics, you will provide the vision, technical strategic direction and manage your teams through the change in technology, all the while keeping a continuous improvement focus for a team of 20+ Engineers in an Agile/Waterfall environment. Don't miss out on this exciting opportunity to work for a highly regarded and thriving business operating in the Cambridge community. Apply now! Candidates searching for the following job titles are also likely to be interested in this role: Head of Hardware Senior Electronics Manager Hardware Manager Engineering ManagerFor full company details and job specification for this unique role please email your CV now.We o Understand your specific requirements and career aspirationso Guarantee to keep you updatedo Provide full pre-interview preparation and post-interview de-briefingo We guarantee not to approach any company without consulting you first!
My client is a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence, and industrial applications. They are seeking an Hardware Manager - Power Electronics, to join their team at their site in Chelmsford, Essex. Reporting to the Head of Engineering, this is a senior technical role leading programmes to develop compact power electronics products for demanding applications. In this leadership role you will be accountable for the technical direction of the programme, defining the product architectures to meet customer requirements and leveraging the best available technology to do so. You will play a key role working with senior technical staff, driving the engineering teams to achieve the design and development goals ensuring system performance is robustly validated throughout. Responsibilities for the Hardware Manager - Power Electronics based in Chelmsford, Essex: - Defining the design approach to meet the customer requirements and ensuring a reliable, manufacture product that meets the commercial targets - Satisfying customers (internal and external) with fast, accurate, and technically competent resolution of technical issues throughout the product life cycle - Defining the technical content of the skills required for the project and setting clear expectations for task delivery - technical quality and time - Leading the technical progress reviews and provides updates to project manager and/or customer, continually checking expectations Key skills and experience for the Hardware Manager - Power Electronics job based in Chelmsford, Essex: - Proven ability to lead a team of skilled engineers in product development - Good understanding of the principles of Systems engineering - Switch Mode power supply design experience - High frequency digital and analogue circuits experience - Experience with travelling wave tubes, and pulsed power products - Must be eligible to gain/already hold a minimum of SC level clearance This is a great opportunity to join a growing company who can offer the opportunity for career progression and personal development. To apply for the Hardware Manager - Power Electronics job, please send your CV , or for more information contact Leah Rogers or
Mar 24, 2024
Full time
My client is a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence, and industrial applications. They are seeking an Hardware Manager - Power Electronics, to join their team at their site in Chelmsford, Essex. Reporting to the Head of Engineering, this is a senior technical role leading programmes to develop compact power electronics products for demanding applications. In this leadership role you will be accountable for the technical direction of the programme, defining the product architectures to meet customer requirements and leveraging the best available technology to do so. You will play a key role working with senior technical staff, driving the engineering teams to achieve the design and development goals ensuring system performance is robustly validated throughout. Responsibilities for the Hardware Manager - Power Electronics based in Chelmsford, Essex: - Defining the design approach to meet the customer requirements and ensuring a reliable, manufacture product that meets the commercial targets - Satisfying customers (internal and external) with fast, accurate, and technically competent resolution of technical issues throughout the product life cycle - Defining the technical content of the skills required for the project and setting clear expectations for task delivery - technical quality and time - Leading the technical progress reviews and provides updates to project manager and/or customer, continually checking expectations Key skills and experience for the Hardware Manager - Power Electronics job based in Chelmsford, Essex: - Proven ability to lead a team of skilled engineers in product development - Good understanding of the principles of Systems engineering - Switch Mode power supply design experience - High frequency digital and analogue circuits experience - Experience with travelling wave tubes, and pulsed power products - Must be eligible to gain/already hold a minimum of SC level clearance This is a great opportunity to join a growing company who can offer the opportunity for career progression and personal development. To apply for the Hardware Manager - Power Electronics job, please send your CV , or for more information contact Leah Rogers or
MB362: Basic Electronics Trainer Location: Lyneham Salary: £40,000 - £45,000 Working Hours: 39 hours per week - Monday to Friday Additional Company Benefits: Generous holiday allowance of 25 days plus 8 bank holidays, Reservist in the armed forces receive 10 days special paid leave, Matched contribution pension scheme up to 4.5% of salary, with life assurance Working from home and flexible work patterns, Employee assistance programme supporting physical, mental and financial wellbeing, Flexible benefits, including cycle to work scheme, discounts and our Share Ownership Scheme Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit a Basic Electronics Trainer on a permanent basis due to growth based at their Lyneham depot. Duties and responsibilities: Delivering Electrical/Electronic Principles, Analogue and Digital Electronics, Microprocessors and Projects. This involves theoretical and contextualised lessons and course development to meet Army standards and external accreditation to Level 3/4 DAO, Pearson and EAL. Deliver Contextualised Academic Lessons, both theory and practical for all of the above subjects. Marking of Exams and Course Work as required. Invigilation of exams. Course Preparation, including the development of blended learning materials/interactive online content. Apply Subject Matter Knowledge and Guidance to develop teaching material and support the course design process. Qualifications and experience: Level 5 (or above) Electrical/Electronic Eng. / Telecommunication / Computer Science Level 4 (HNC) Electrical/Electronic Eng. / Telecommunication / Computer Science or other related Engineering discipline Level 4 or higher Teaching qualification (or willingness to aquire one) Current and relevant engineering mathematical knowledge Recent Service leaver with a technical trade background Army, RAF, RN. Teaching/Lecturing in FE/HE Environment, with an appreciation of modern apprenticeship requirements Knowledge and expeience of working with Microsoft Office Knowledge of Moodle interactive software MB362: Basic Electronics Trainer Location: Lyneham Salary: £40,000 - £45,000 Working Hours: 39 hours per week - Monday to Friday Additional Company Benefits: Generous holiday allowance of 25 days plus 8 bank holidays, Reservist in the armed forces receive 10 days special paid leave, Matched contribution pension scheme up to 4.5% of salary, with life assurance Working from home and flexible work patterns, Employee assistance programme supporting physical, mental and financial wellbeing, Flexible benefits, including cycle to work scheme, discounts and our Share Ownership Scheme
Mar 24, 2024
Full time
MB362: Basic Electronics Trainer Location: Lyneham Salary: £40,000 - £45,000 Working Hours: 39 hours per week - Monday to Friday Additional Company Benefits: Generous holiday allowance of 25 days plus 8 bank holidays, Reservist in the armed forces receive 10 days special paid leave, Matched contribution pension scheme up to 4.5% of salary, with life assurance Working from home and flexible work patterns, Employee assistance programme supporting physical, mental and financial wellbeing, Flexible benefits, including cycle to work scheme, discounts and our Share Ownership Scheme Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit a Basic Electronics Trainer on a permanent basis due to growth based at their Lyneham depot. Duties and responsibilities: Delivering Electrical/Electronic Principles, Analogue and Digital Electronics, Microprocessors and Projects. This involves theoretical and contextualised lessons and course development to meet Army standards and external accreditation to Level 3/4 DAO, Pearson and EAL. Deliver Contextualised Academic Lessons, both theory and practical for all of the above subjects. Marking of Exams and Course Work as required. Invigilation of exams. Course Preparation, including the development of blended learning materials/interactive online content. Apply Subject Matter Knowledge and Guidance to develop teaching material and support the course design process. Qualifications and experience: Level 5 (or above) Electrical/Electronic Eng. / Telecommunication / Computer Science Level 4 (HNC) Electrical/Electronic Eng. / Telecommunication / Computer Science or other related Engineering discipline Level 4 or higher Teaching qualification (or willingness to aquire one) Current and relevant engineering mathematical knowledge Recent Service leaver with a technical trade background Army, RAF, RN. Teaching/Lecturing in FE/HE Environment, with an appreciation of modern apprenticeship requirements Knowledge and expeience of working with Microsoft Office Knowledge of Moodle interactive software MB362: Basic Electronics Trainer Location: Lyneham Salary: £40,000 - £45,000 Working Hours: 39 hours per week - Monday to Friday Additional Company Benefits: Generous holiday allowance of 25 days plus 8 bank holidays, Reservist in the armed forces receive 10 days special paid leave, Matched contribution pension scheme up to 4.5% of salary, with life assurance Working from home and flexible work patterns, Employee assistance programme supporting physical, mental and financial wellbeing, Flexible benefits, including cycle to work scheme, discounts and our Share Ownership Scheme
We have a fantastic new opportunity for a Senior Hardware Design Engineer / Architect to join a state-of-the-art R&D company based in South Cambridgeshire. You will be working across an exciting range of different cutting-edge development projects predominantly within the defence and security sector, however, may also get involved in medical device and consumer electronics product development.You will join the friendly and supportive R&D group, developing technology that makes a difference and has real-world impact. You'll use your FPGA and hardware design skills to help take designs from concept to prototypes through to design and implementation.In return you can expect a very competitive salary, excellent benefits package, first class R&D facilities, flexibility / hybrid working will also be considered when required. Senior Hardware Design Engineer / Architect requirements: 2.1 or above degree in Electronics or closely related equivalent Recent and relevant experience working as a Senior FPGA Engineer / Senior Hardware Design Engineer / Principal Engineer / Hardware Architect designing and developing high-end embedded application hardware architectures Excellent knowledge and experience in analogue and digital electronics design Knowledge of embedded technologies such as CPUs, SoCs, high-speed communication and DDRx memory Experience of full product development lifecycle from concept generation to prototypes through to design and implementation Due to the nature of some of the projects you must be eligible for UK security clearance. Salary: circa £70k - £90k + benefits Vacancy Location: South Cambridgeshire (Commutable from Cambridge, Stevenage, North London, St Neots, Luton, Bishop's Stortford, Bury St Edmunds, etc)
Mar 23, 2024
Full time
We have a fantastic new opportunity for a Senior Hardware Design Engineer / Architect to join a state-of-the-art R&D company based in South Cambridgeshire. You will be working across an exciting range of different cutting-edge development projects predominantly within the defence and security sector, however, may also get involved in medical device and consumer electronics product development.You will join the friendly and supportive R&D group, developing technology that makes a difference and has real-world impact. You'll use your FPGA and hardware design skills to help take designs from concept to prototypes through to design and implementation.In return you can expect a very competitive salary, excellent benefits package, first class R&D facilities, flexibility / hybrid working will also be considered when required. Senior Hardware Design Engineer / Architect requirements: 2.1 or above degree in Electronics or closely related equivalent Recent and relevant experience working as a Senior FPGA Engineer / Senior Hardware Design Engineer / Principal Engineer / Hardware Architect designing and developing high-end embedded application hardware architectures Excellent knowledge and experience in analogue and digital electronics design Knowledge of embedded technologies such as CPUs, SoCs, high-speed communication and DDRx memory Experience of full product development lifecycle from concept generation to prototypes through to design and implementation Due to the nature of some of the projects you must be eligible for UK security clearance. Salary: circa £70k - £90k + benefits Vacancy Location: South Cambridgeshire (Commutable from Cambridge, Stevenage, North London, St Neots, Luton, Bishop's Stortford, Bury St Edmunds, etc)
Principal RF Engineer Basildon, Essex £50 - £69p/h Inside IR35 (DOE) 6 months initial contract Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.
Mar 22, 2024
Contractor
Principal RF Engineer Basildon, Essex £50 - £69p/h Inside IR35 (DOE) 6 months initial contract Our client has a fantastic opportunity for a RF/Microwave Engineer for delivery of an Inter-Vehicle Data Link communications system. We are looking for an engineer with microwave engineering knowledge familiar with working on complex electronic (ideally RF-based) sensor systems. The role will focus on the electronics design of the RF and control subsystems to be implemented on laboratory and aircraft concept demonstrators in later stages of the project. You will provide technical support throughout the product life cycle including design implementation, integration and test, system trials and product delivery. What you will do: You will be responsible for delivery of work packages focused on analogue and RF electronics, covering the inter-vehicle data link design, system test and integration. Modelling of proposed architectures to determine the optimal solution. Simulation of RF designs Documentation of designs including configuration management within the product data management tool Support to laboratory hardware demonstrator development and test. What we are looking for: Practical hands on experience of RF design of circuitry between DC and 30 GHz. Experience of the design of PLLs in the 10 to 30 GHz frequency range. Experience of working with PCB layout personnel in an advisory capacity. Hands on experience of using RF test and measurement equipment to develop and debug RF circuitry up to 30 GHz. Ability to use RF and system modelling and simulation tools such as MATLAB and Keysight ADS. Ability to produce concise technical reports detailing design solutions and implementation. Ability to understand and follow the business practices, such as design reviews, which come with working in a high technology defence environment. Degree in relevant engineering or related scientific discipline (Electronics Engineering or Physics preferred). Ability to make technical decisions within own sphere of responsibility. Willingness to work proactively within a fast moving and dynamic environment. It would be nice if you had: Knowledge/experience of digital or mixed signal design. Experience in system level and sub-system integration and debug. Experience of working in the defence electronics sector. Experience of working with UK MOD (eg RAF, DSTL, DE&S) An understanding of the deployment of airborne military platforms, systems and operation within the enterprise environment. The nature of the programmes involving electronics design requires you to be capable of achieving full UK SC security clearance and in addition, you will require the ability to access caveated information such as UK Eyes Only and ITAR.