OT Security Engineer 6-month initial contract Umbrella only Bath based - mainly remote with office time to embed into role initially and then once a month from there (or similar ) My client, a leading Utilities provider in the Southwest are actively seeking a Cyber Security Engineer with OT and IT experience, to join their project team. They are currently in the process of implementing LogRhythm as well at Claroty. Therefore, hands on experience working to implement these tools or similar is essential. The role Lead the definition, configuration, and implementation of security controls and services. Design, configure and manage an array of Cyber Security tools and technologies including anti-virus products, SIEM, EDR, XDR and CMDBs. Develop and deliver secure system profiles and maintain a view of compliance. Assist the development of granular Asset Management tooling and processes and employ such mechanisms to maintain granular visibility of the estate. Where and when appropriate you may be expected to support the BAU team with Threat Hunting tasks, review Indicators of Compromise that may impact the infrastructure and work to implement methods of blocking/quarantining threats with the Security tools that are in place. Assist compliance activity (ISO, GDPR, NIS) and audits when required. Working as dedicated Security Engineering Specialist on existing security focused Programme of work focused on securing OT environments. Knowledge and Experience Preferred: Hands-on experience deploying and configuring a wide array of common security technologies and tools (LogRhythm, Claroty etc.) would be a significant benefit. Hold at least one of the following or equivalent Industry qualifications, Microsoft MS-500, Microsoft AZ-500, Microsoft SC-900, VCTA-SEC / VCP-SEC. Internationally recognized cyber security standards and OT Regulations (NIST-CSF, ISO27k series, NISD, NIS2 etc.). OT cybersecurity standards and frameworks (IEC ISA 99/62443, NIST SP 800-82, etc.). Essential: Experience working on or leading projects to deliver new security solutions. Experience securing on premise infrastructure. Network security design and technologies. Experience securing OT / ICS systems (SCADA, HMI, PLC, etc.). Experience and knowledge of identity and access management. Knowledge of common cyber security threats and application of countermeasures. Good knowledge of Tactics, Techniques and Procedures (TTP) e.g., MITRE Att&ck Framework. Superior knowledge of Cloud security principles, techniques and technologies. For more details, please reach out to Mary Pearson on - .
May 02, 2024
Full time
OT Security Engineer 6-month initial contract Umbrella only Bath based - mainly remote with office time to embed into role initially and then once a month from there (or similar ) My client, a leading Utilities provider in the Southwest are actively seeking a Cyber Security Engineer with OT and IT experience, to join their project team. They are currently in the process of implementing LogRhythm as well at Claroty. Therefore, hands on experience working to implement these tools or similar is essential. The role Lead the definition, configuration, and implementation of security controls and services. Design, configure and manage an array of Cyber Security tools and technologies including anti-virus products, SIEM, EDR, XDR and CMDBs. Develop and deliver secure system profiles and maintain a view of compliance. Assist the development of granular Asset Management tooling and processes and employ such mechanisms to maintain granular visibility of the estate. Where and when appropriate you may be expected to support the BAU team with Threat Hunting tasks, review Indicators of Compromise that may impact the infrastructure and work to implement methods of blocking/quarantining threats with the Security tools that are in place. Assist compliance activity (ISO, GDPR, NIS) and audits when required. Working as dedicated Security Engineering Specialist on existing security focused Programme of work focused on securing OT environments. Knowledge and Experience Preferred: Hands-on experience deploying and configuring a wide array of common security technologies and tools (LogRhythm, Claroty etc.) would be a significant benefit. Hold at least one of the following or equivalent Industry qualifications, Microsoft MS-500, Microsoft AZ-500, Microsoft SC-900, VCTA-SEC / VCP-SEC. Internationally recognized cyber security standards and OT Regulations (NIST-CSF, ISO27k series, NISD, NIS2 etc.). OT cybersecurity standards and frameworks (IEC ISA 99/62443, NIST SP 800-82, etc.). Essential: Experience working on or leading projects to deliver new security solutions. Experience securing on premise infrastructure. Network security design and technologies. Experience securing OT / ICS systems (SCADA, HMI, PLC, etc.). Experience and knowledge of identity and access management. Knowledge of common cyber security threats and application of countermeasures. Good knowledge of Tactics, Techniques and Procedures (TTP) e.g., MITRE Att&ck Framework. Superior knowledge of Cloud security principles, techniques and technologies. For more details, please reach out to Mary Pearson on - .
Do you want to be part of a long-standing team, who are experts in their field, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do We are a technically driven business with over 30 years of expertise; engineering and supporting high integrity control systems where failure simply isn't an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK and Europe with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career in engineering, look no further. We have an opportunity for an enthusiastic and ambitious Technician to join us on our mission to seamlessly deliver end-to-end control systems. What we need from you. You are a team player who will be working within our system support department who are responsible for preventative maintenance, design and modifications of existing SCADA, PLC and associated sub-systems as well as providing 24-hour emergency call out nationwide. For the right candidate, on the job training and mentoring will be provided to fill any skills gaps you may have. We are looking for: Practical people who have some experience or interest in engineering and technology. Work as part of a team who are responsible for planning, procuring, maintaining, and reporting over a wide range of sites and sub-systems. Someone who enjoys diagnosing and problem solving and is committed to customer service. Willing to travel throughout the UK, working nights on a regular basis. Have a full UK driving licence and valid passport. Have no criminal convictions due to security clearances required by airport authorities. Will be qualified to NVQ, C&G level or above in a relevant Electrical/Electronic or IT engineering discipline. There is plenty of room for growth and progression which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations it is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about PDS, it is that we love to get social, so this is a big part of our culture. Flexible working giving you the ability to finish at 1pm on Fridays. We pride ourselves on being a great place to work but don't just take our word for it, here's what Graduate Engineer Sean has to say. "Everyone at PDS is beyond friendly! I enjoy the diversity of my work whether that be travelling to different locations or having the opportunity to gain experience on a multitude of equipment of varying ages, providing me with some great exposure. I particularly value the diversity of our engineers as each person has their own skillset and expertise. And in the short time I have been with PDS I have met a lot of different people who have all entered into their engineering career from different routes; everyone shares their knowledge and experience with each other, and this has provided me with the foundations required to find my feet as a Graduate Engineer."
May 02, 2024
Full time
Do you want to be part of a long-standing team, who are experts in their field, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do We are a technically driven business with over 30 years of expertise; engineering and supporting high integrity control systems where failure simply isn't an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK and Europe with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career in engineering, look no further. We have an opportunity for an enthusiastic and ambitious Technician to join us on our mission to seamlessly deliver end-to-end control systems. What we need from you. You are a team player who will be working within our system support department who are responsible for preventative maintenance, design and modifications of existing SCADA, PLC and associated sub-systems as well as providing 24-hour emergency call out nationwide. For the right candidate, on the job training and mentoring will be provided to fill any skills gaps you may have. We are looking for: Practical people who have some experience or interest in engineering and technology. Work as part of a team who are responsible for planning, procuring, maintaining, and reporting over a wide range of sites and sub-systems. Someone who enjoys diagnosing and problem solving and is committed to customer service. Willing to travel throughout the UK, working nights on a regular basis. Have a full UK driving licence and valid passport. Have no criminal convictions due to security clearances required by airport authorities. Will be qualified to NVQ, C&G level or above in a relevant Electrical/Electronic or IT engineering discipline. There is plenty of room for growth and progression which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations it is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about PDS, it is that we love to get social, so this is a big part of our culture. Flexible working giving you the ability to finish at 1pm on Fridays. We pride ourselves on being a great place to work but don't just take our word for it, here's what Graduate Engineer Sean has to say. "Everyone at PDS is beyond friendly! I enjoy the diversity of my work whether that be travelling to different locations or having the opportunity to gain experience on a multitude of equipment of varying ages, providing me with some great exposure. I particularly value the diversity of our engineers as each person has their own skillset and expertise. And in the short time I have been with PDS I have met a lot of different people who have all entered into their engineering career from different routes; everyone shares their knowledge and experience with each other, and this has provided me with the foundations required to find my feet as a Graduate Engineer."
Do you want to be part of a long-standing team, who are experts in their field, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do We are a technically driven business with over 30 years of expertise; engineering and supporting high integrity control systems where failure simply isn't an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK and Europe with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career in engineering, look no further. We have an opportunity for an enthusiastic and ambitious systems engineer to join us on our mission to seamlessly deliver end-to-end control systems. What we need from you. You are a team player looking to train as a Support Engineer using some of the following skills; we do not expect you to have experience in all these areas and for the right candidate on the job training and mentoring will be provided to fill any skills gaps you may have. You will work within the system support department who are responsible for preventative maintenance, design and modifications of existing SCADA, PLC and associated sub-systems as well as providing 24-hour emergency call out nationwide. Ability to problem solve and diagnose issues as and when they arise. Committed to providing excellent customer service. Ability to program a variety of PLCs using Ladder Logic, Function block or Statement List methods. Ability to program and configure SCADA software packages. Have a high-level competency in programming languages ranging from C, C++, C#, VB and VBA. Understanding of design and configuration of IP networks. Competent at design and testing of ELV electrical panels. Ability to configure CCTV, PA and telephone systems over an IP network. Willing to travel throughout the UK, working nights on a regular basis. Have a full UK driving licence and valid passport. Have no criminal convictions due to security clearances required by airport authorities. Degree/HND in control, electrical, electronic or software engineering. There is plenty of room for growth and progression which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations it is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about PDS, it is that we love to get social, so this is a big part of our culture. Flexible working giving you the ability to finish at 1pm on Fridays. We pride ourselves on being a great place to work but don't just take our word for it, here's what Graduate Engineer Sean has to say. "Everyone at PDS is beyond friendly! I enjoy the diversity of my work whether that be travelling to different locations or having the opportunity to gain experience on a multitude of equipment of varying ages, providing me with some great exposure. I particularly value the diversity of our engineers as each person has their own skillset and expertise. And in the short time I have been with PDS I have met a lot of different people who have all entered into their engineering career from different routes; everyone shares their knowledge and experience with each other, and this has provided me with the foundations required to find my feet as a Graduate Engineer."
May 02, 2024
Full time
Do you want to be part of a long-standing team, who are experts in their field, where no two days are the same and where possibilities to develop new skills and experiences are around every corner? PDS is passionate about creating a friendly, open and inclusive working environment where individuals are supported to excel in their area of expertise. We are continually seeking out new ways to improve our business and are firm believers that everyone should enjoy what they do. What we do We are a technically driven business with over 30 years of expertise; engineering and supporting high integrity control systems where failure simply isn't an option. These can range from small upgrades through to fully integrated turnkey solutions, covering all aspects of technology from control room to field devices. We supply the latest technology to various locations throughout the UK and Europe with our prestigious clients predominantly being within Intelligent Transport Systems (ITS), Highways, Airports and Power sectors. If you are a keen problem solver with excellent communication skills, looking for a challenging yet rewarding career in engineering, look no further. We have an opportunity for an enthusiastic and ambitious systems engineer to join us on our mission to seamlessly deliver end-to-end control systems. What we need from you. You are a team player looking to train as a Support Engineer using some of the following skills; we do not expect you to have experience in all these areas and for the right candidate on the job training and mentoring will be provided to fill any skills gaps you may have. You will work within the system support department who are responsible for preventative maintenance, design and modifications of existing SCADA, PLC and associated sub-systems as well as providing 24-hour emergency call out nationwide. Ability to problem solve and diagnose issues as and when they arise. Committed to providing excellent customer service. Ability to program a variety of PLCs using Ladder Logic, Function block or Statement List methods. Ability to program and configure SCADA software packages. Have a high-level competency in programming languages ranging from C, C++, C#, VB and VBA. Understanding of design and configuration of IP networks. Competent at design and testing of ELV electrical panels. Ability to configure CCTV, PA and telephone systems over an IP network. Willing to travel throughout the UK, working nights on a regular basis. Have a full UK driving licence and valid passport. Have no criminal convictions due to security clearances required by airport authorities. Degree/HND in control, electrical, electronic or software engineering. There is plenty of room for growth and progression which is proven by most of the management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations it is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about PDS, it is that we love to get social, so this is a big part of our culture. Flexible working giving you the ability to finish at 1pm on Fridays. We pride ourselves on being a great place to work but don't just take our word for it, here's what Graduate Engineer Sean has to say. "Everyone at PDS is beyond friendly! I enjoy the diversity of my work whether that be travelling to different locations or having the opportunity to gain experience on a multitude of equipment of varying ages, providing me with some great exposure. I particularly value the diversity of our engineers as each person has their own skillset and expertise. And in the short time I have been with PDS I have met a lot of different people who have all entered into their engineering career from different routes; everyone shares their knowledge and experience with each other, and this has provided me with the foundations required to find my feet as a Graduate Engineer."
Senior Control Systems Engineer - Berkshire - up to £65,000 + Benefits - Ref 1472 I am currently recruiting for a Control Systems Engineer to work for a key client of mine based in Berkshire. Salary up to £65,000. The company's mission is the pursuit of engineering solutions that transform industries and enhance the efficiency of companies across the UK. They aim to provide excellence and are committed to delivering engineering solutions that exceed client's expectations. To support the continued growth of the business and to deal with the amount of work they have now and forecasted they have the need to appoint a Control Systems Engineer on a permanent basis. As a Control Systems Engineer in this role, you will have the exciting opportunity to oversee projects from inception to completion, encompassing the entire spectrum of Control System Software design, whether it be via PLC Software, SCADA, or HMI interfaces. Additionally, you will support testing and seamless commissioning of these systems, ensuring their flawless integration into operational environments. Essential Requirements: 2 Years Experience as a Control Systems Engineer or Similar Experience Developing PLC Software Design - Siemens, Rockwell, Allen Bradley etc Desirable Requirements Experience in the Utilities Sector Experience with Site Surveys, Installation, Factory Acceptance Tests, Commissioning This is a brand-new position offering a fantastic opportunity for a Senior Control Systems Engineer to join a captivating organisation renowned for its unwavering commitment to innovation and continuous technological advancement. Here, you will be at the forefront of pioneering efforts, constantly pushing the limits of engineering solutions to new heights. For the ideal candidate, the organisation is wholeheartedly dedicated to fostering career growth, thus ensuring that numerous avenues for career advancement will be readily accessible. This is an immediate requirement so if you have the required skills and experience, please get in touch immediately with an up to date copy of your CV. Either apply direct or contact Billy on JBRP1_UKTJ
May 02, 2024
Full time
Senior Control Systems Engineer - Berkshire - up to £65,000 + Benefits - Ref 1472 I am currently recruiting for a Control Systems Engineer to work for a key client of mine based in Berkshire. Salary up to £65,000. The company's mission is the pursuit of engineering solutions that transform industries and enhance the efficiency of companies across the UK. They aim to provide excellence and are committed to delivering engineering solutions that exceed client's expectations. To support the continued growth of the business and to deal with the amount of work they have now and forecasted they have the need to appoint a Control Systems Engineer on a permanent basis. As a Control Systems Engineer in this role, you will have the exciting opportunity to oversee projects from inception to completion, encompassing the entire spectrum of Control System Software design, whether it be via PLC Software, SCADA, or HMI interfaces. Additionally, you will support testing and seamless commissioning of these systems, ensuring their flawless integration into operational environments. Essential Requirements: 2 Years Experience as a Control Systems Engineer or Similar Experience Developing PLC Software Design - Siemens, Rockwell, Allen Bradley etc Desirable Requirements Experience in the Utilities Sector Experience with Site Surveys, Installation, Factory Acceptance Tests, Commissioning This is a brand-new position offering a fantastic opportunity for a Senior Control Systems Engineer to join a captivating organisation renowned for its unwavering commitment to innovation and continuous technological advancement. Here, you will be at the forefront of pioneering efforts, constantly pushing the limits of engineering solutions to new heights. For the ideal candidate, the organisation is wholeheartedly dedicated to fostering career growth, thus ensuring that numerous avenues for career advancement will be readily accessible. This is an immediate requirement so if you have the required skills and experience, please get in touch immediately with an up to date copy of your CV. Either apply direct or contact Billy on JBRP1_UKTJ
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: £35,720 - £51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
May 02, 2024
Full time
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: £35,720 - £51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
Job Profile for Controls & Software Engineer - MC269937 Controls & Software Engineer required for a pharmaceutical manufacturer based in the Liverpool area. To design and develop software aspects of machinery to a project specification and in line with the project schedule and budget. Controls & Software Engineer Position Overview Confer with engineers, customers and others to discuss existing or potential engineering projects and products. Design, implement & maintain PLC, HMI Software & SCADA systems. Direct and co-ordinate construction, installation, maintenance, support, documentation and testing activities to ensure compliance with specifications, codes and customer requirements. Observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Prepare specifications for purchase of materials and equipment. Supervise and train project team members as necessary. Investigate customer complaints, determine nature and extent of problem and recommend remedial measures. IQ / OQ support on site. (Occasional) Controls & Software Engineer Position Requirements Software Engineering Degree or equivalent WinCC and SCADA systems TIA Portal, Ladder Logic PLC & HMI Siemens S7 Scripts (VB/C etc) Excellent communication skills Organisation and prioritisation skills Excellent IT skills including MS Office Ability to work as part of a team Controls & Software Engineer Position Remuneration £55k-£65k dependent on experience Hybrid available Early finish Fridays Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
May 01, 2024
Full time
Job Profile for Controls & Software Engineer - MC269937 Controls & Software Engineer required for a pharmaceutical manufacturer based in the Liverpool area. To design and develop software aspects of machinery to a project specification and in line with the project schedule and budget. Controls & Software Engineer Position Overview Confer with engineers, customers and others to discuss existing or potential engineering projects and products. Design, implement & maintain PLC, HMI Software & SCADA systems. Direct and co-ordinate construction, installation, maintenance, support, documentation and testing activities to ensure compliance with specifications, codes and customer requirements. Observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Prepare specifications for purchase of materials and equipment. Supervise and train project team members as necessary. Investigate customer complaints, determine nature and extent of problem and recommend remedial measures. IQ / OQ support on site. (Occasional) Controls & Software Engineer Position Requirements Software Engineering Degree or equivalent WinCC and SCADA systems TIA Portal, Ladder Logic PLC & HMI Siemens S7 Scripts (VB/C etc) Excellent communication skills Organisation and prioritisation skills Excellent IT skills including MS Office Ability to work as part of a team Controls & Software Engineer Position Remuneration £55k-£65k dependent on experience Hybrid available Early finish Fridays Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Facility Engineer - Operational Technology Location : Reading/Basingstoke area Package : 35,720 - 48,000 (depending on suitability) Why work at AWE? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours (including Bank Holidays) of annual leave - plus every other Friday off work Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you be doing? You will be part of a specialist team within a multi-discipline service delivery function and will be responsible for providing expertise in disciplines such as software configuration, SMART instruments and disaster recovery, whilst considering cyber security aspects. Within this position you will: Act as the intelligent customer for AWE with regards to OT as part of the Operational Technology team Providing technical consultancy to maintainers, facility engineers, project managers and commissioning teams Develop, maintain and update Policies and Procedure for use within the team and wider areas Working across a range of plant, facilities and systems within the sites in both production and research environments in support of the UK nuclear deterrent Identifying technical issues, evaluating options and providing solutions within the bounds of individual technical competence, seeing tasks through to satisfactory conclusion We'd love to hear from individuals with the following: Previous experience in an Operational Technology Engineering role or supporting OT equipment Experience of diagnosing faults on OT/PC based systems and installing/replacing hardware/software to resolve the issue Extensive experience working with SCADA and PLC / BMS / DCS systems and developing or modifying software for them Computer literate, with knowledge of industry standard packages such as Step7, TIA Portal, WinCC, Unity Pro, Wonderware, RSLogix etc A good knowledge of software engineering techniques and design for maintenance principles Experience of configuration control of software on operational plant & equipment Awareness of Cyber security practices for OT systems and why relevant Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
May 01, 2024
Full time
Facility Engineer - Operational Technology Location : Reading/Basingstoke area Package : 35,720 - 48,000 (depending on suitability) Why work at AWE? As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours (including Bank Holidays) of annual leave - plus every other Friday off work Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site What will you be doing? You will be part of a specialist team within a multi-discipline service delivery function and will be responsible for providing expertise in disciplines such as software configuration, SMART instruments and disaster recovery, whilst considering cyber security aspects. Within this position you will: Act as the intelligent customer for AWE with regards to OT as part of the Operational Technology team Providing technical consultancy to maintainers, facility engineers, project managers and commissioning teams Develop, maintain and update Policies and Procedure for use within the team and wider areas Working across a range of plant, facilities and systems within the sites in both production and research environments in support of the UK nuclear deterrent Identifying technical issues, evaluating options and providing solutions within the bounds of individual technical competence, seeing tasks through to satisfactory conclusion We'd love to hear from individuals with the following: Previous experience in an Operational Technology Engineering role or supporting OT equipment Experience of diagnosing faults on OT/PC based systems and installing/replacing hardware/software to resolve the issue Extensive experience working with SCADA and PLC / BMS / DCS systems and developing or modifying software for them Computer literate, with knowledge of industry standard packages such as Step7, TIA Portal, WinCC, Unity Pro, Wonderware, RSLogix etc A good knowledge of software engineering techniques and design for maintenance principles Experience of configuration control of software on operational plant & equipment Awareness of Cyber security practices for OT systems and why relevant Candidates must be willing and able to obtain and maintain the necessary security clearance for the role.
Belcan is recruiting for a Control Systems Engineer in Cheltenham - Hybrid Permanent role. You will be working on a number of live projects within the energy and utilities sectors, covering full project lifecycle, from design to delivery. Whilst the role will encompass projects across a portfolio of clients, the immediate requirement will be focussing on an innovation project which is now being rolled out as Business-As-Usual for our client surrounding the build and implementation of an in-house SCADA solution using open-source technology. You will be based out of our office in Cheltenham with 3 days expected in the office and the remaining days home-based. Some travel to client sites will be required on an ad-hoc basis. Key responsibilities: Carry out full lifecycle activities on brownfield projects, including the creation of user specifications, test procedures, PLC software programming, and on-site testing. Generate and maintain project technical documentation Site commissioning Test systems design, build and document Controlled assurance updates to defined procedures Qualifications, Skills & Experience Essential: Knowledge of HMI & SCADA systems Knowledge of full PLC software design and build lifecycle, including associated international standards. Experience in using one or more control system hardware platforms (such as Siemens, Allen Bradley, ABB). Ability to perform unsupervised on own initiative and as part of a team Proficiency in all areas of Microsoft Office, including Word, Excel, PowerPoint and Teams. Technical qualification to HND or Degree level (e.g. Electrical Engineering, Computer Engineering, Systems Engineering). Preferred: Experienced in working to CDM regulations Understanding of electrical schematics and panel drawings Knowledge of OT Cyber security standards such as IEC-62443 Experience within Oil & Gas, Petrochemicals, Process or Gas Compression The role offers the opportunity to join a growing company with an expanding projects portfolio. About Us Belcan is a specialist engineering consultancy providing control & instrumentation engineering, process & technical safety services, and OT cyber security consultancy services. Founded in 2008 we are a team of high calibre engineers and have a passion for combining engineering and innovation. Belcan is an international engineering firm founded over 60 years ago, serving customers in over 60 locations worldwide. This vacancy is being advertised by Belcan.
May 01, 2024
Full time
Belcan is recruiting for a Control Systems Engineer in Cheltenham - Hybrid Permanent role. You will be working on a number of live projects within the energy and utilities sectors, covering full project lifecycle, from design to delivery. Whilst the role will encompass projects across a portfolio of clients, the immediate requirement will be focussing on an innovation project which is now being rolled out as Business-As-Usual for our client surrounding the build and implementation of an in-house SCADA solution using open-source technology. You will be based out of our office in Cheltenham with 3 days expected in the office and the remaining days home-based. Some travel to client sites will be required on an ad-hoc basis. Key responsibilities: Carry out full lifecycle activities on brownfield projects, including the creation of user specifications, test procedures, PLC software programming, and on-site testing. Generate and maintain project technical documentation Site commissioning Test systems design, build and document Controlled assurance updates to defined procedures Qualifications, Skills & Experience Essential: Knowledge of HMI & SCADA systems Knowledge of full PLC software design and build lifecycle, including associated international standards. Experience in using one or more control system hardware platforms (such as Siemens, Allen Bradley, ABB). Ability to perform unsupervised on own initiative and as part of a team Proficiency in all areas of Microsoft Office, including Word, Excel, PowerPoint and Teams. Technical qualification to HND or Degree level (e.g. Electrical Engineering, Computer Engineering, Systems Engineering). Preferred: Experienced in working to CDM regulations Understanding of electrical schematics and panel drawings Knowledge of OT Cyber security standards such as IEC-62443 Experience within Oil & Gas, Petrochemicals, Process or Gas Compression The role offers the opportunity to join a growing company with an expanding projects portfolio. About Us Belcan is a specialist engineering consultancy providing control & instrumentation engineering, process & technical safety services, and OT cyber security consultancy services. Founded in 2008 we are a team of high calibre engineers and have a passion for combining engineering and innovation. Belcan is an international engineering firm founded over 60 years ago, serving customers in over 60 locations worldwide. This vacancy is being advertised by Belcan.
Automation Engineer (FMCG) Shepton Mallet £35,000 + OT + Excellent Training and Development Opportunities My client is a leading FMCG manufacturer in their field. They are currently looking to recruit an Automation Engineer for their site near Shepton Mallet The successful Automation Engineer will be working as part of a team of engineers and will be assisting the Engineering management Team, to maintain and develop the Process and Control Systems Network, PC, Server / Virtualization Infrastructure & Databases. Maintenance and development of PLC Systems and SCADA Systems. This role offers fantastic opportunities for someone wishing to develop in their career and is seeking an opportunity to grow within a business - The company is prepared to invest in training and qualifications for the right candidate This role is Mon - Friday Day based with an out of hours on call pattern 1 in 4 week days and 1 in 4 weekends. Automation Engineer Key Responsibilities/Accountabilities: The automation engineering role will be maintaining current functioning control systems. System updates and firmware updates. In future to provide breakdown cover for the cheese production facility. In future it is required that, on completion of a probationary period, the position to be part of a one in four-week call Rota, providing out of hours "technical" assistance in a timely manner. Weekend work will also be required when needed, where time in lieu or remuneration can be requested subject to the company's rules. Maintain and update DELL PowerEdge servers & DELL EMC SANS. Maintain and update VMWare vSphere system. Maintain and update PC clients as well as Engineering workstations. These can be either in physical form or virtualised. Manage the Domain and create new rules as and when required. Enhance the SCADA system by creating Dot Net, ActiveX and .dll programs to overcome SCADA software limitations. Automation Engineer Skills / Experience Required : Good working knowledge of IT networking inc. NAT, ACL's etc. preferably on FortiGate devices. Good working knowledge of VMWare vSphere virtualization platform. SQL Database Administration & Maintenance. Experience in Windows programming using MVVM through WPF / C#. Willingness to learn and take on new challenges. Willingness to work as part of a small "hands" on team. If the role is of interest then please send your CV today
May 01, 2024
Full time
Automation Engineer (FMCG) Shepton Mallet £35,000 + OT + Excellent Training and Development Opportunities My client is a leading FMCG manufacturer in their field. They are currently looking to recruit an Automation Engineer for their site near Shepton Mallet The successful Automation Engineer will be working as part of a team of engineers and will be assisting the Engineering management Team, to maintain and develop the Process and Control Systems Network, PC, Server / Virtualization Infrastructure & Databases. Maintenance and development of PLC Systems and SCADA Systems. This role offers fantastic opportunities for someone wishing to develop in their career and is seeking an opportunity to grow within a business - The company is prepared to invest in training and qualifications for the right candidate This role is Mon - Friday Day based with an out of hours on call pattern 1 in 4 week days and 1 in 4 weekends. Automation Engineer Key Responsibilities/Accountabilities: The automation engineering role will be maintaining current functioning control systems. System updates and firmware updates. In future to provide breakdown cover for the cheese production facility. In future it is required that, on completion of a probationary period, the position to be part of a one in four-week call Rota, providing out of hours "technical" assistance in a timely manner. Weekend work will also be required when needed, where time in lieu or remuneration can be requested subject to the company's rules. Maintain and update DELL PowerEdge servers & DELL EMC SANS. Maintain and update VMWare vSphere system. Maintain and update PC clients as well as Engineering workstations. These can be either in physical form or virtualised. Manage the Domain and create new rules as and when required. Enhance the SCADA system by creating Dot Net, ActiveX and .dll programs to overcome SCADA software limitations. Automation Engineer Skills / Experience Required : Good working knowledge of IT networking inc. NAT, ACL's etc. preferably on FortiGate devices. Good working knowledge of VMWare vSphere virtualization platform. SQL Database Administration & Maintenance. Experience in Windows programming using MVVM through WPF / C#. Willingness to learn and take on new challenges. Willingness to work as part of a small "hands" on team. If the role is of interest then please send your CV today
Hybrid 3 days in our London Mortlake SW14 office, with adhoc client site visits in the UK. Permanent staff role. The Position Belcan is seeking an experienced Control Systems Engineer to support us on a number of live projects within the energy and utilities sectors. The role will support our client and internal team through the full project lifecycle, from design to delivery. The role will project manage the technical realisation of solutions including managing resources and deliverables. Whilst the role will encompass projects across a portfolio of clients, the immediate requirement will be focussing on an innovation project which is now being rolled out as Business-As-Usual for our client surrounding the build, implementation and maintenance of an in-house SCADA solution using open source technology. Key responsibilities: Engineering management with DCS/SCADA/PLC and Safety Systems. Carry out full lifecycle activities on brownfield projects, including the creation of user specifications, test procedures, PLC software programming, and on-site testing as required. Full project lifecycle document control, including creation and maintenance. Feed/Pre-Feed surveys and proposals. Project planning, workflow management along with communication to stakeholders. Risk identification and mitigation. Working with planning colleagues to create and maintain realisation programmes. Qualifications, Skills & Experience Essential: Extensive Control Systems experience. Knowledge of full PLC software design and build lifecycle, including associated international standards. Experience in using one or more control system hardware platforms (such as Siemens, Allen Bradley, ABB). Ability to multi-task and manage multiple project requirements simultaneously. Technical qualification to HND or Degree level (e.g. Electrical Engineering, Computer Engineering, Systems Engineering). Preferred: Experienced in working to CDM regulations. Linux platform proficiency. Ability to draw on a range of project management skills, tools and approaches. Experience within Oil & Gas, Petrochemicals, Process or Gas Compression. About Us Belcan Advanced Solutions (BAS) is a specialist technical services provider and engineering consultancy of approx. 65 staff, with core services encompassing multi-disciplinary design engineering, multi-vendor systems delivery, operational technology (OT) cyber security, and COMAH and technical safety compliance. Founded in 1958, Belcan has become a global technological leader and established go to Engineering Services provider, working within many industries including Aerospace, Defence, Marine, Nuclear, Automotive and Cyber Security with over 10,000 professionals serving hundreds of customers in over 60 locations worldwide. BAS is part of the Belcan Group. This vacancy is being advertised by Belcan.
May 01, 2024
Full time
Hybrid 3 days in our London Mortlake SW14 office, with adhoc client site visits in the UK. Permanent staff role. The Position Belcan is seeking an experienced Control Systems Engineer to support us on a number of live projects within the energy and utilities sectors. The role will support our client and internal team through the full project lifecycle, from design to delivery. The role will project manage the technical realisation of solutions including managing resources and deliverables. Whilst the role will encompass projects across a portfolio of clients, the immediate requirement will be focussing on an innovation project which is now being rolled out as Business-As-Usual for our client surrounding the build, implementation and maintenance of an in-house SCADA solution using open source technology. Key responsibilities: Engineering management with DCS/SCADA/PLC and Safety Systems. Carry out full lifecycle activities on brownfield projects, including the creation of user specifications, test procedures, PLC software programming, and on-site testing as required. Full project lifecycle document control, including creation and maintenance. Feed/Pre-Feed surveys and proposals. Project planning, workflow management along with communication to stakeholders. Risk identification and mitigation. Working with planning colleagues to create and maintain realisation programmes. Qualifications, Skills & Experience Essential: Extensive Control Systems experience. Knowledge of full PLC software design and build lifecycle, including associated international standards. Experience in using one or more control system hardware platforms (such as Siemens, Allen Bradley, ABB). Ability to multi-task and manage multiple project requirements simultaneously. Technical qualification to HND or Degree level (e.g. Electrical Engineering, Computer Engineering, Systems Engineering). Preferred: Experienced in working to CDM regulations. Linux platform proficiency. Ability to draw on a range of project management skills, tools and approaches. Experience within Oil & Gas, Petrochemicals, Process or Gas Compression. About Us Belcan Advanced Solutions (BAS) is a specialist technical services provider and engineering consultancy of approx. 65 staff, with core services encompassing multi-disciplinary design engineering, multi-vendor systems delivery, operational technology (OT) cyber security, and COMAH and technical safety compliance. Founded in 1958, Belcan has become a global technological leader and established go to Engineering Services provider, working within many industries including Aerospace, Defence, Marine, Nuclear, Automotive and Cyber Security with over 10,000 professionals serving hundreds of customers in over 60 locations worldwide. BAS is part of the Belcan Group. This vacancy is being advertised by Belcan.
Louise Hewett Recruitment
Bromsgrove, Worcestershire
The Role As a Senior Software Design Engineer, you will be working as part of dynamic team who thrive on the day-to-day challenges of delivering projects at pace. As a senior engineer you will be responsible for leading the design and implementation of control system software solutions. You will play a crucial role in understanding and implementing customer specifications, providing technical leadership, and mentoring other team members. Systems will be simple HMI solutions with 10's of IO, through to the multi-VFD systems with full SCADA and PLC systems with 100's of IO. Systems will typically consist of VFDs, PLC's and HMI with communication interconnections. You will consult with customers to develop an understanding of each machine and its requirements, while working within specific time frames and budgets. The job will suit someone who enjoys a wide variety of projects and has an ability to quickly assimilate knowledge and experience to new platforms and products. Occasional UK and overseas travel for commissioning support may also be required on more complex projects. Responsibilities Write clean, efficient, and well commented code, predominantly in Ladder Logic, but also other forms when appropriate. Use a consistent coding format based on internal standards. Provide technical guidance and mentorship to other team members including the test department. Collaborate with other engineers to drive technical excellence within the team. Ability to work on several projects in parallel and schedule your work to meet deadlines. To quickly understand different machines and develop solutions for these challenges. Debug and troubleshoot issues, ensuring timely resolution, including overseeing functional software test at the site in Bromsgrove. Consult with, and sometimes support the installation and commissioning phases of the project to ensure successful and timely completion to the customers' satisfaction. Participate in code reviews to maintain code quality and ensure adherence to coding standards. To develop and maintain good relationships with customers. Create, maintain and update relevant documentation. Requirements Degree in Electric/Electronic Engineering, Software Engineering, or a related field. Member of a related professional body - preferably chartered. Minimum 5 years of experience in software design and development of systems controls Proven expertise in designing and implementing large-scale, mission-critical systems. Proven experience in the following: PLC's - Working with Siemens (Simatic Manager/TIA Portal (LAD & SCL and Rockwell, including safety systems. HMI- Working with (TIA WinCC Advanced/Panelview) SCADA- Working with (WinCC/TiaWinCC/InTouch/ViewDesigner) Industry standard communication protocols Working with Ethernet (IP) and Profinet and ideally Modbus, Profibus, Profisafe, ControlNet, CTNet.) Building complete software solutions from initial concept for projects for systems based around 1 High level PLC (S7-151x or 1756-Lxx) with multiple remote IO nodes, and other intelligent devices on the network. E.g., Drives, Encoders, Temperature controllers £45,000 - £55,000. Based in Bromsgrove. Monday to Friday 8am to 4:30pm.
May 01, 2024
Full time
The Role As a Senior Software Design Engineer, you will be working as part of dynamic team who thrive on the day-to-day challenges of delivering projects at pace. As a senior engineer you will be responsible for leading the design and implementation of control system software solutions. You will play a crucial role in understanding and implementing customer specifications, providing technical leadership, and mentoring other team members. Systems will be simple HMI solutions with 10's of IO, through to the multi-VFD systems with full SCADA and PLC systems with 100's of IO. Systems will typically consist of VFDs, PLC's and HMI with communication interconnections. You will consult with customers to develop an understanding of each machine and its requirements, while working within specific time frames and budgets. The job will suit someone who enjoys a wide variety of projects and has an ability to quickly assimilate knowledge and experience to new platforms and products. Occasional UK and overseas travel for commissioning support may also be required on more complex projects. Responsibilities Write clean, efficient, and well commented code, predominantly in Ladder Logic, but also other forms when appropriate. Use a consistent coding format based on internal standards. Provide technical guidance and mentorship to other team members including the test department. Collaborate with other engineers to drive technical excellence within the team. Ability to work on several projects in parallel and schedule your work to meet deadlines. To quickly understand different machines and develop solutions for these challenges. Debug and troubleshoot issues, ensuring timely resolution, including overseeing functional software test at the site in Bromsgrove. Consult with, and sometimes support the installation and commissioning phases of the project to ensure successful and timely completion to the customers' satisfaction. Participate in code reviews to maintain code quality and ensure adherence to coding standards. To develop and maintain good relationships with customers. Create, maintain and update relevant documentation. Requirements Degree in Electric/Electronic Engineering, Software Engineering, or a related field. Member of a related professional body - preferably chartered. Minimum 5 years of experience in software design and development of systems controls Proven expertise in designing and implementing large-scale, mission-critical systems. Proven experience in the following: PLC's - Working with Siemens (Simatic Manager/TIA Portal (LAD & SCL and Rockwell, including safety systems. HMI- Working with (TIA WinCC Advanced/Panelview) SCADA- Working with (WinCC/TiaWinCC/InTouch/ViewDesigner) Industry standard communication protocols Working with Ethernet (IP) and Profinet and ideally Modbus, Profibus, Profisafe, ControlNet, CTNet.) Building complete software solutions from initial concept for projects for systems based around 1 High level PLC (S7-151x or 1756-Lxx) with multiple remote IO nodes, and other intelligent devices on the network. E.g., Drives, Encoders, Temperature controllers £45,000 - £55,000. Based in Bromsgrove. Monday to Friday 8am to 4:30pm.
JOB - Control Systems Engineer LOCATION - Northamptonshire TERM - Permanent SALARY - £55,000 - £60,000 A UK based manufacturing company are looking for a Control Systems Engineer to join their team on a permanent basis. The Control Systems Engineer will ideally have the following attributes: Writing code of PLC, SCADA & HMI 3 years' experience writing software. Programming languages such as Ladder Logic & Function Block. Full UK driving license. Ability to work independently or as part of a team. The duties & responsibilities will include: Liaising with candidates to ensure their requirements are met. Writing software for PLCs etc. Process safety systems design. Full life cycle control systems development from design through to commissioning.
May 01, 2024
Full time
JOB - Control Systems Engineer LOCATION - Northamptonshire TERM - Permanent SALARY - £55,000 - £60,000 A UK based manufacturing company are looking for a Control Systems Engineer to join their team on a permanent basis. The Control Systems Engineer will ideally have the following attributes: Writing code of PLC, SCADA & HMI 3 years' experience writing software. Programming languages such as Ladder Logic & Function Block. Full UK driving license. Ability to work independently or as part of a team. The duties & responsibilities will include: Liaising with candidates to ensure their requirements are met. Writing software for PLCs etc. Process safety systems design. Full life cycle control systems development from design through to commissioning.
KAP Technical Limited
Northampton, Northamptonshire
Control Systems Engineer Location: Northamptonshire Salary: £55,000 - £60,000 per annum Company Overview: KAP Technical is excited to offer an opportunity for a skilled Control Systems Engineer to join our client's team. Our client specialises in projects within the manufacturing, sectors. Role Responsibilities: As a Control Systems Engineer , you will be responsible for the following: Software Development: Develop PLC, HMI, and SCADA software to meet project requirements. Write detailed functional design specifications. Create associated documentation for software and hardware solutions. Customer Interaction: Communicate with customers to understand their requirements. Provide engineering proposals, including cost estimates. Project Management: Adhere to project budgets and deadlines. Deliver projects with control software and process safety systems engineering design. Systems Design and Commissioning: Carry out full control systems design. Perform site commissioning. Provide post-installation support. Qualifications and Skills: Minimum 3 years of experience in PLC, HMI, and SCADA software development. Clean driving license. Ability to work independently or as part of a multidisciplinary team. Familiarity with industrial networks (e.g., Profibus, Profinet). Knowledge of safety systems design and programming (advantageous). Experience with Siemens PLC preferred (training provided). Additional Considerations: Willingness to occasionally work away from home and on weekends. Ability to understand electrical drawings. Background in engineering environments. Benefits: Pension Scheme Income Protection Scheme (after 1 year) Onsite parking TOL/Overtime and expenses paid. Free social events, team building, and Christmas party Car allowance/company car (after 6 months
May 01, 2024
Full time
Control Systems Engineer Location: Northamptonshire Salary: £55,000 - £60,000 per annum Company Overview: KAP Technical is excited to offer an opportunity for a skilled Control Systems Engineer to join our client's team. Our client specialises in projects within the manufacturing, sectors. Role Responsibilities: As a Control Systems Engineer , you will be responsible for the following: Software Development: Develop PLC, HMI, and SCADA software to meet project requirements. Write detailed functional design specifications. Create associated documentation for software and hardware solutions. Customer Interaction: Communicate with customers to understand their requirements. Provide engineering proposals, including cost estimates. Project Management: Adhere to project budgets and deadlines. Deliver projects with control software and process safety systems engineering design. Systems Design and Commissioning: Carry out full control systems design. Perform site commissioning. Provide post-installation support. Qualifications and Skills: Minimum 3 years of experience in PLC, HMI, and SCADA software development. Clean driving license. Ability to work independently or as part of a multidisciplinary team. Familiarity with industrial networks (e.g., Profibus, Profinet). Knowledge of safety systems design and programming (advantageous). Experience with Siemens PLC preferred (training provided). Additional Considerations: Willingness to occasionally work away from home and on weekends. Ability to understand electrical drawings. Background in engineering environments. Benefits: Pension Scheme Income Protection Scheme (after 1 year) Onsite parking TOL/Overtime and expenses paid. Free social events, team building, and Christmas party Car allowance/company car (after 6 months
JOB - Control Systems Engineer LOCATION - Tyne and Wear TERM - Permanent SALARY - £40,000 - £60,000 per annum. A South Tyneside based Engineering company are currently looking for a Control Systems Engineer to join their team on a permanent basis. The Control Systems Engineer will ideally have the following attributes: Qualifications in Electrical Engineering or relevant discipline. At least 3 years' experience in Electrical & Controls Engineering. Good understanding of PLC softwares such as Siemens and Allen-Bradley. The Control Systems Engineer's duties will involve: Producing & modifying PLC, HMI & SCADA softwares. Installation commissioning, fault finding, modification of electrical systems. Project budget & management. Ensuring safety standards are met at all times. If you are interested in this Control Systems Engineering position, please apply with an up-to-date CV as soon as possible or email
May 01, 2024
Full time
JOB - Control Systems Engineer LOCATION - Tyne and Wear TERM - Permanent SALARY - £40,000 - £60,000 per annum. A South Tyneside based Engineering company are currently looking for a Control Systems Engineer to join their team on a permanent basis. The Control Systems Engineer will ideally have the following attributes: Qualifications in Electrical Engineering or relevant discipline. At least 3 years' experience in Electrical & Controls Engineering. Good understanding of PLC softwares such as Siemens and Allen-Bradley. The Control Systems Engineer's duties will involve: Producing & modifying PLC, HMI & SCADA softwares. Installation commissioning, fault finding, modification of electrical systems. Project budget & management. Ensuring safety standards are met at all times. If you are interested in this Control Systems Engineering position, please apply with an up-to-date CV as soon as possible or email
Software Engineer - Automation Solutions As a Software Engineer you will contribute towards the development of my client's next generation of automation machines, developing motion control software on various PLC platforms, typically Siemens, Rockwell, Beckhoff. Working for a global automation solution provider, you'll be working on projects Clean Energy, FMCG, and Pharma manufacturers. What will you do doing? Deliver high-quality software designs that align with both internal and external customer demands as well as regulatory requirements, using a deep understanding of the full lifecycle of projects across pharmaceutical and other process manufacturing sectors. Develop and test PLC and HMI/SCADA software applications, predominantly using Siemens, alongside network design and implementation of protocols like MODBUS and OPC. Essential skills in PLC coding for various systems including Rockwell and Siemens are crucial. Engage in onsite activities such as system commissioning (SAT), post-installation support, and customer training, requiring regular travel both within the UK and internationally. Maintain a high level of commercial awareness during the design process to ensure cost-effective solutions and manage scope changes following standard operating procedures. Actively participate in continuous improvement efforts within the department and effectively communicate project statuses to the Control Systems Manager, customers, and suppliers. Assist in preparation of comprehensive design documentation including I/O lists, Functional Design Specifications (FDS), System Design Instructions (SDI), System Design Specifications (SDS), and FAT/SAT test documents. Support various teams including sales, proposals, projects, and design by providing technical expertise in simulations, estimating, software and hardware selections, and enhancing knowledge in areas like condition monitoring systems and functional/machine safety. What experience do you need to be successful? Experience in the PLC software design. Experience of working in an innovative environment and providing innovative solutions. Experience in evaluating technical requirements and providing viable solutions. The generation and verification of software design documents. Interpretation of customer requirements and presentation of design solutions at internal design reviews. Applying technical due diligence, being risk aware, performing FMEA and using design studies and POP work to mitigate risk. Knowledge of British and international standards relative to the design and installation of industrial automation systems. What skills are we looking for? Apprentice trained in Electrical or Mechatronic Engineering or HNC, HND, or BSC in a relevant engineering discipline. Proficient in the use of Rockwell and Siemens programming platforms What do you get in return? Competitive market salary (depends on level of entry) Benefits package (33 days holiday, 4.5 day week, pension, dental & eye, death in service) Flexible working model Interested? Apply to find out more!
May 01, 2024
Full time
Software Engineer - Automation Solutions As a Software Engineer you will contribute towards the development of my client's next generation of automation machines, developing motion control software on various PLC platforms, typically Siemens, Rockwell, Beckhoff. Working for a global automation solution provider, you'll be working on projects Clean Energy, FMCG, and Pharma manufacturers. What will you do doing? Deliver high-quality software designs that align with both internal and external customer demands as well as regulatory requirements, using a deep understanding of the full lifecycle of projects across pharmaceutical and other process manufacturing sectors. Develop and test PLC and HMI/SCADA software applications, predominantly using Siemens, alongside network design and implementation of protocols like MODBUS and OPC. Essential skills in PLC coding for various systems including Rockwell and Siemens are crucial. Engage in onsite activities such as system commissioning (SAT), post-installation support, and customer training, requiring regular travel both within the UK and internationally. Maintain a high level of commercial awareness during the design process to ensure cost-effective solutions and manage scope changes following standard operating procedures. Actively participate in continuous improvement efforts within the department and effectively communicate project statuses to the Control Systems Manager, customers, and suppliers. Assist in preparation of comprehensive design documentation including I/O lists, Functional Design Specifications (FDS), System Design Instructions (SDI), System Design Specifications (SDS), and FAT/SAT test documents. Support various teams including sales, proposals, projects, and design by providing technical expertise in simulations, estimating, software and hardware selections, and enhancing knowledge in areas like condition monitoring systems and functional/machine safety. What experience do you need to be successful? Experience in the PLC software design. Experience of working in an innovative environment and providing innovative solutions. Experience in evaluating technical requirements and providing viable solutions. The generation and verification of software design documents. Interpretation of customer requirements and presentation of design solutions at internal design reviews. Applying technical due diligence, being risk aware, performing FMEA and using design studies and POP work to mitigate risk. Knowledge of British and international standards relative to the design and installation of industrial automation systems. What skills are we looking for? Apprentice trained in Electrical or Mechatronic Engineering or HNC, HND, or BSC in a relevant engineering discipline. Proficient in the use of Rockwell and Siemens programming platforms What do you get in return? Competitive market salary (depends on level of entry) Benefits package (33 days holiday, 4.5 day week, pension, dental & eye, death in service) Flexible working model Interested? Apply to find out more!
Circa £45,500k, salary depending on skills & experience, plus car allowance Full time/37 hrs a week/permanent Location: Field based position, Bury St Edmunds base location with travel across the South & East of the region. Anglian Water offers a flexible approach, this is a field based position but when you're not required onsite you will be able to work from home too. We're looking for someone to be based in Bury St Edmunds and to travel to sites across the South and East of the Anglian Water region. Make every drop of your potential count. Join our team! We're currently looking for a PLC Software Engineer to join the team on a permanent basis. The role will be working as part of an integrated Commissioning Team of MEICA and Process Commissioning Engineers to safely and efficiently carry out the commissioning of Water & Water Recycling capital projects. The role will involve Testing, modifying and programming Schneider and Allen Bradley PLC control systems and modifying and configuring HMI and SCADA, as part of the wider testing and start-up of new treatment plants and systems for the first time, to prove reliability and performance prior to hand over to the end user. What you'll be doing: Review of PLC, SCADA and/or Telemetry system design by Alliance and MCC Framework partners Involvement throughout whole software/systems lifecycle, from design through coding to testing, installation, configuration, and test documentation Liaising with Commissioning Engineers in the production of Commissioning Plans to define appropriate durations for Site Acceptance Testing on projects. Liaising with Commissioning Engineers to ensure Impact Plans identify any control and automation risks and include mitigation to ensure zero impact on customer supplies and quality of product. Producing Risk Assessments & Method Statements for testing of automated control systems on site. Carrying out Integrated Factory Acceptance Testing (IFAT) of Motor Control Centres (MCC), PLC Input / Output testing, configuration and testing of Telemetry systems and Edge devices in factory and on site, Site Acceptance Testing (SAT) of plant to Functional Design Specification (FDS), training of Anglian Water Works Technicians, red lining FDS to as built status as required. Configuring, modifying, testing and programming PLC control systems and modifying and configuring HMI and SCADA on site. Liaising with Commissioning Engineers in the fault finding and optimisation of automated control systems Producing test documentation for handover of new assets. Ensuring new automated assets are handed over to AWS Operations in a safe, reliable, working order with all handover documentation complete As a valued employee you'll be entitled to: Car allowance Competitive pension scheme - Anglian Water double-matches your contributions up to 6% Personal private health care Annual bonus scheme 25 days leave, rising with service + Bank Holidays, with the option to swap Christmas and Easter holidays for those celebrated by your religion Life Cover at 8x your salary Personal Accident cover - up to 5x your salary Flexible benefits to support your wellbeing and lifestyle What does it take to be successful? Experienced in software production for Allen Bradley and Schneider PLCs, HMI and Geo SCADA. PLC system design, coding, testing and commissioning SCADA system design, configuration and commissioning Engineering / Computer related or appropriate engineering qualification (degree/HND) or comparable industrial experience. Ability to obtain UK Counter Terrorist Clearance (CTC) Inductive Automation's Ignition SCADA systems. Familiarity with MQTT IoT messaging and use of Edge devices. Member of, or working towards membership of, relevant professional body (e.g. MIET). If you are offered a job with us, you'll be subject to the relevant/standard employment checks, including: your right to work in the UK, reference, driving licence and identity check. Depending on your role, you may also be subject to further pre-employment checks. Why Anglian Water? Anglian Water is not your typical water company. What we do really matters. Water is the lifeblood of our world and we're proud of the difference we make. We put people at the heart of our business and we truly love what we do! Inclusion at Anglian Water: Join us and make a difference. Our customers come from a wide range of backgrounds, and we think our workplace should reflect that. We are committed to making sure all our colleagues feel they belong and are supported to succeed. Together with our fellow water companies, we are committed to the Social Mobility Pledge; we are also a signatory to Business in the Community's Race at Work charter; we hold the Armed Forces Gold Covenant for Employers; we are an accredited Disability Confident employer, and we play a leading part in the Women's Utility Network. Closing Date: 6th May 2024
May 01, 2024
Full time
Circa £45,500k, salary depending on skills & experience, plus car allowance Full time/37 hrs a week/permanent Location: Field based position, Bury St Edmunds base location with travel across the South & East of the region. Anglian Water offers a flexible approach, this is a field based position but when you're not required onsite you will be able to work from home too. We're looking for someone to be based in Bury St Edmunds and to travel to sites across the South and East of the Anglian Water region. Make every drop of your potential count. Join our team! We're currently looking for a PLC Software Engineer to join the team on a permanent basis. The role will be working as part of an integrated Commissioning Team of MEICA and Process Commissioning Engineers to safely and efficiently carry out the commissioning of Water & Water Recycling capital projects. The role will involve Testing, modifying and programming Schneider and Allen Bradley PLC control systems and modifying and configuring HMI and SCADA, as part of the wider testing and start-up of new treatment plants and systems for the first time, to prove reliability and performance prior to hand over to the end user. What you'll be doing: Review of PLC, SCADA and/or Telemetry system design by Alliance and MCC Framework partners Involvement throughout whole software/systems lifecycle, from design through coding to testing, installation, configuration, and test documentation Liaising with Commissioning Engineers in the production of Commissioning Plans to define appropriate durations for Site Acceptance Testing on projects. Liaising with Commissioning Engineers to ensure Impact Plans identify any control and automation risks and include mitigation to ensure zero impact on customer supplies and quality of product. Producing Risk Assessments & Method Statements for testing of automated control systems on site. Carrying out Integrated Factory Acceptance Testing (IFAT) of Motor Control Centres (MCC), PLC Input / Output testing, configuration and testing of Telemetry systems and Edge devices in factory and on site, Site Acceptance Testing (SAT) of plant to Functional Design Specification (FDS), training of Anglian Water Works Technicians, red lining FDS to as built status as required. Configuring, modifying, testing and programming PLC control systems and modifying and configuring HMI and SCADA on site. Liaising with Commissioning Engineers in the fault finding and optimisation of automated control systems Producing test documentation for handover of new assets. Ensuring new automated assets are handed over to AWS Operations in a safe, reliable, working order with all handover documentation complete As a valued employee you'll be entitled to: Car allowance Competitive pension scheme - Anglian Water double-matches your contributions up to 6% Personal private health care Annual bonus scheme 25 days leave, rising with service + Bank Holidays, with the option to swap Christmas and Easter holidays for those celebrated by your religion Life Cover at 8x your salary Personal Accident cover - up to 5x your salary Flexible benefits to support your wellbeing and lifestyle What does it take to be successful? Experienced in software production for Allen Bradley and Schneider PLCs, HMI and Geo SCADA. PLC system design, coding, testing and commissioning SCADA system design, configuration and commissioning Engineering / Computer related or appropriate engineering qualification (degree/HND) or comparable industrial experience. Ability to obtain UK Counter Terrorist Clearance (CTC) Inductive Automation's Ignition SCADA systems. Familiarity with MQTT IoT messaging and use of Edge devices. Member of, or working towards membership of, relevant professional body (e.g. MIET). If you are offered a job with us, you'll be subject to the relevant/standard employment checks, including: your right to work in the UK, reference, driving licence and identity check. Depending on your role, you may also be subject to further pre-employment checks. Why Anglian Water? Anglian Water is not your typical water company. What we do really matters. Water is the lifeblood of our world and we're proud of the difference we make. We put people at the heart of our business and we truly love what we do! Inclusion at Anglian Water: Join us and make a difference. Our customers come from a wide range of backgrounds, and we think our workplace should reflect that. We are committed to making sure all our colleagues feel they belong and are supported to succeed. Together with our fellow water companies, we are committed to the Social Mobility Pledge; we are also a signatory to Business in the Community's Race at Work charter; we hold the Armed Forces Gold Covenant for Employers; we are an accredited Disability Confident employer, and we play a leading part in the Women's Utility Network. Closing Date: 6th May 2024
Looking to the future, this growing PLC SCADA Systems Design Company has asked us to search for 2Control Systems Engineers. Experienced in PLC programming and Control Systems Design and software integration - but you will be encouraged to keep growing, keep adding skills across the next 5 years with the company's ongoing learning schemes. You willworkon a range of PLC HMI SCADA process control and automation projects, coding, programming, writing PLC software, configuring HMI and SCADA, documenting and then commissioning projects for well-known UK only customers working from start to finish, seeing the project working at the end. PLC programming ability is essential- some of the following would be good: Rockwell Automation, Allen Bradley, possibly Schneider or Mitsubishi PLC's. Some HMI/ SCADA configuration experience Happy to commission systems on mostly local /English customer sites. Rewards: Salary in the £40K's - dependent on experience, skills, development and support needed. But the support is there. Benefits include 25+8 days holidays, some flexible working, bonus scheme, 6% pension contribution, healthcare, PLUS paid overtime, and many others. HARTLAND RECRUITMENT:Technical and Engineering Recruitment Specialists UK Wide. Established in 1990 and recruiting for a wide range of Companies in all UK regions, with a "no pressure" attitude we won't sell you a job like a used car, but hopefully, we'll find the job that you've asked us to! Let us help you to find your next move in: Design, Software, PLC SCADA Control Systems Engineering, Service Engineering, Maintenance Engineering, Project Engineering, Sales Engineering and Machinery / Automation Design Engineering. JBRP1_UKTJ
Apr 30, 2024
Full time
Looking to the future, this growing PLC SCADA Systems Design Company has asked us to search for 2Control Systems Engineers. Experienced in PLC programming and Control Systems Design and software integration - but you will be encouraged to keep growing, keep adding skills across the next 5 years with the company's ongoing learning schemes. You willworkon a range of PLC HMI SCADA process control and automation projects, coding, programming, writing PLC software, configuring HMI and SCADA, documenting and then commissioning projects for well-known UK only customers working from start to finish, seeing the project working at the end. PLC programming ability is essential- some of the following would be good: Rockwell Automation, Allen Bradley, possibly Schneider or Mitsubishi PLC's. Some HMI/ SCADA configuration experience Happy to commission systems on mostly local /English customer sites. Rewards: Salary in the £40K's - dependent on experience, skills, development and support needed. But the support is there. Benefits include 25+8 days holidays, some flexible working, bonus scheme, 6% pension contribution, healthcare, PLUS paid overtime, and many others. HARTLAND RECRUITMENT:Technical and Engineering Recruitment Specialists UK Wide. Established in 1990 and recruiting for a wide range of Companies in all UK regions, with a "no pressure" attitude we won't sell you a job like a used car, but hopefully, we'll find the job that you've asked us to! Let us help you to find your next move in: Design, Software, PLC SCADA Control Systems Engineering, Service Engineering, Maintenance Engineering, Project Engineering, Sales Engineering and Machinery / Automation Design Engineering. JBRP1_UKTJ
Earthstream are proud to be recruiting a Senior Control Systems Engineer for a leading control systems business delivering high-integrity solutions to a prestiguous client base across Transporation Infrastructure, Power, Tunnels and Airport industries Job Role: Senior Control Systems Engineer Location: Derby Salary: £45,870 - £52,647 pa What we need from you. A team player with excellent technical aptitude who has the desire to succeed. You will work as a Systems Engineer within the control system industry having some of the following skills; we do not expect you to have experience in all these areas and for the right candidate on the job training and mentoring will be provided to fill any skills gaps you may have. Have technical responsibility for projects including design, development, and testing of control/integrated systems digital systems including traffic detection and management, ventilation and pump control, life safety systems, incident management and many more. Responsible for the day-to-day co-ordination and technical management of Project Engineers and working as part of a team to achieve project delivery. Ability to program a variety of PLCs using Ladder Logic, Function block or Statement List methods. Ability to program and configure SCADA software packages and User Interface mimic design including some competency in programming languages such as C, SQL or VBA Understanding of design and configuration of IP networks. Competent at design and testing of ELV electrical panels. Ability to configure CCTV, PA and telephone systems over an IP network. Professionalism to perform FAT and site commissioning under formal client witnessed conditions. Work collaboratively and proactively with our clients. Degree/HND in control, electrical, electronic or software engineering. Have 5 years' experience in delivering control/integrated systems using some of the desired skills listed above. There is plenty of room for growth and progression which is proven by all our management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations - It is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about us, it is that we love to get social, so this is a big part of our culture. Hybrid working - If the pandemic taught us anything it's that we don't need to be in the office 5 days a week, every week, helping towards a not only a positive work life balance but a healthier planet. Flexible working giving you the ability to finish at 1pm on Fridays. JBRP1_UKTJ
Apr 30, 2024
Full time
Earthstream are proud to be recruiting a Senior Control Systems Engineer for a leading control systems business delivering high-integrity solutions to a prestiguous client base across Transporation Infrastructure, Power, Tunnels and Airport industries Job Role: Senior Control Systems Engineer Location: Derby Salary: £45,870 - £52,647 pa What we need from you. A team player with excellent technical aptitude who has the desire to succeed. You will work as a Systems Engineer within the control system industry having some of the following skills; we do not expect you to have experience in all these areas and for the right candidate on the job training and mentoring will be provided to fill any skills gaps you may have. Have technical responsibility for projects including design, development, and testing of control/integrated systems digital systems including traffic detection and management, ventilation and pump control, life safety systems, incident management and many more. Responsible for the day-to-day co-ordination and technical management of Project Engineers and working as part of a team to achieve project delivery. Ability to program a variety of PLCs using Ladder Logic, Function block or Statement List methods. Ability to program and configure SCADA software packages and User Interface mimic design including some competency in programming languages such as C, SQL or VBA Understanding of design and configuration of IP networks. Competent at design and testing of ELV electrical panels. Ability to configure CCTV, PA and telephone systems over an IP network. Professionalism to perform FAT and site commissioning under formal client witnessed conditions. Work collaboratively and proactively with our clients. Degree/HND in control, electrical, electronic or software engineering. Have 5 years' experience in delivering control/integrated systems using some of the desired skills listed above. There is plenty of room for growth and progression which is proven by all our management team beginning their career with us as students. What we offer in return. In addition to a generous salary, you can expect to receive some other great benefits too. 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years. Paid overtime. Company performance related bonus. Wellbeing benefit - a monthly instalment made in addition to your salary to contribute towards anything that makes you happy. Pension scheme. Anniversary celebrations - It is important to us that we celebrate the commitment and value people have brought to our business over the years. Social events - If there is one thing about us, it is that we love to get social, so this is a big part of our culture. Hybrid working - If the pandemic taught us anything it's that we don't need to be in the office 5 days a week, every week, helping towards a not only a positive work life balance but a healthier planet. Flexible working giving you the ability to finish at 1pm on Fridays. JBRP1_UKTJ
Control Systems Integration Engineer - Automation Our expanding business is currently offering numerous exciting opportunities for prospective employees. Adsyst recently celebrated a significant milestone in our business by welcoming our 100th employee. This achievement is a testament to the rapid growth and success of our company. Control Systems Integration Engineer Job Description This is a fantastic opportunity to join our team, as a Control Systems Integration Engineer, you will be responsible for the full life cycle delivery of the project in both technical compliance and quality. Attending meetings with clients to discuss the design, surveys, software programming, configuration, testing and commissioning for projects. As a Control Systems Integration Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA , HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Full-time position: (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays) What we are looking for: Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLC's like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) What we require from you: Previous control system experience ( 2 years+ ) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience) What you will get in return Auto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired) Company bonus scheme (after 1 year service) Private Health Scheme (after 1 year service) Sick pay (after 6 months service) Death in Service Plan (after 5 years service) Access to our Wellbeing programme operated through COGG () Access to 24/7 365 days confidential employee counselling service, free for employees and their families Access to our Training Hub (various training courses available) Annual Personal development and salary reviews Free parking at all our offices Access to company vans or pool cars (company car scheme also available) Access to Perkbox () This gives employees access to discounted shopping, eating out, cinema and even holidays Free quarterly social events, team building days and Christmas party weekend break (partners included). TIL / Overtime and expenses scheme Our company At Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance. Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We have four offices nationally; our Head office in Yateley, Hampshire, our Stafford office and a further two offices in Peterborough and Greater London. With our core skills lying in PLC, SCADA, HMI, MIS, MES, RTU, control system software engineering, data acquisition, bespoke software and LV Assemblies and Electrical installation, our expertise in panel building and electrical installation allows us to offer full turnkey solutions. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions. At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background. Join us to contribute to our vibrant culture and make a difference! Other positions are available in thisoffice, as well as our other offices within the UK. Please see our website for more information at: JBRP1_UKTJ
Apr 30, 2024
Full time
Control Systems Integration Engineer - Automation Our expanding business is currently offering numerous exciting opportunities for prospective employees. Adsyst recently celebrated a significant milestone in our business by welcoming our 100th employee. This achievement is a testament to the rapid growth and success of our company. Control Systems Integration Engineer Job Description This is a fantastic opportunity to join our team, as a Control Systems Integration Engineer, you will be responsible for the full life cycle delivery of the project in both technical compliance and quality. Attending meetings with clients to discuss the design, surveys, software programming, configuration, testing and commissioning for projects. As a Control Systems Integration Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career. The ideal candidate will have previous knowledge of PLC's, SCADA , HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar. Full-time position: (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays) What we are looking for: Experience in designing control system's PLC and HMI/SCADA software and making amendments/upgrades to existing system software. Experience in producing project documentation Competence in the programming of PLC's like Siemens, Rockwell, or Mitsubishi PLC's AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms. UK Sites commissioning (which may involve short periods away from home) What we require from you: Previous control system experience ( 2 years+ ) Software Engineering Degree and/or Electrical qualifications Experience with Allen Bradley, Siemens Mitsubishi PLC's or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms Good verbal and written communication skills Clean UK Driving License Must be eligible to work in the UK For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience) What you will get in return Auto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired) Company bonus scheme (after 1 year service) Private Health Scheme (after 1 year service) Sick pay (after 6 months service) Death in Service Plan (after 5 years service) Access to our Wellbeing programme operated through COGG () Access to 24/7 365 days confidential employee counselling service, free for employees and their families Access to our Training Hub (various training courses available) Annual Personal development and salary reviews Free parking at all our offices Access to company vans or pool cars (company car scheme also available) Access to Perkbox () This gives employees access to discounted shopping, eating out, cinema and even holidays Free quarterly social events, team building days and Christmas party weekend break (partners included). TIL / Overtime and expenses scheme Our company At Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance. Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We have four offices nationally; our Head office in Yateley, Hampshire, our Stafford office and a further two offices in Peterborough and Greater London. With our core skills lying in PLC, SCADA, HMI, MIS, MES, RTU, control system software engineering, data acquisition, bespoke software and LV Assemblies and Electrical installation, our expertise in panel building and electrical installation allows us to offer full turnkey solutions. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions. At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background. Join us to contribute to our vibrant culture and make a difference! Other positions are available in thisoffice, as well as our other offices within the UK. Please see our website for more information at: JBRP1_UKTJ
Control Systems Engineerto design DCS systems for customer projects. Other skills in PLC and SCADA software design would also be useful. Working on UK-only projects, delivering PCS7 DCS systems projects, and assisting in Siemens TIA Portal, S7, WinCC projects to the chemical, process, petrochemical industries. The ideal person would have: PCS7 programming, DCS projects experience PLC programming -Siemens TIA Portal experience would be good (S7, Step7, WinCC all good). Commissioning experience the ability to commission the process control systems software on well known customer sites in the UK to see your project to its end. Other DCS experience Yokogawa, Honeywell, ABB could be useful, but PCS7 remains the most used on the projects here. The company is generating new opportunities for its Engineersand it believes in growing skills, growing people and growing careers. You will receive a competitive basic salary based on your existing skills, with the aim of increasing these as your own skills grow. Plus healthcare, bonus, professional membership, 33 days holiday, pension, and other benefits too. Send your CV to Mark Burnard at Hartland Recruitment for more details. HARTLAND RECRUITMENT: Technical and Engineering Recruitment Specialists UK Wide. Established in 1990 and recruiting for a wide range of Companies in all UK regions, with a "no pressure" attitude we won't sell you a job like a used car, but hopefully, we'll find the job that you've asked us to! Let us help you to find your next move in: Design, Software, PLC SCADA Control Systems Engineering, Service Engineering, Maintenance Engineering, Project Engineering, Sales Engineering and Machinery / Automation Design Engineering. JBRP1_UKTJ
Apr 30, 2024
Full time
Control Systems Engineerto design DCS systems for customer projects. Other skills in PLC and SCADA software design would also be useful. Working on UK-only projects, delivering PCS7 DCS systems projects, and assisting in Siemens TIA Portal, S7, WinCC projects to the chemical, process, petrochemical industries. The ideal person would have: PCS7 programming, DCS projects experience PLC programming -Siemens TIA Portal experience would be good (S7, Step7, WinCC all good). Commissioning experience the ability to commission the process control systems software on well known customer sites in the UK to see your project to its end. Other DCS experience Yokogawa, Honeywell, ABB could be useful, but PCS7 remains the most used on the projects here. The company is generating new opportunities for its Engineersand it believes in growing skills, growing people and growing careers. You will receive a competitive basic salary based on your existing skills, with the aim of increasing these as your own skills grow. Plus healthcare, bonus, professional membership, 33 days holiday, pension, and other benefits too. Send your CV to Mark Burnard at Hartland Recruitment for more details. HARTLAND RECRUITMENT: Technical and Engineering Recruitment Specialists UK Wide. Established in 1990 and recruiting for a wide range of Companies in all UK regions, with a "no pressure" attitude we won't sell you a job like a used car, but hopefully, we'll find the job that you've asked us to! Let us help you to find your next move in: Design, Software, PLC SCADA Control Systems Engineering, Service Engineering, Maintenance Engineering, Project Engineering, Sales Engineering and Machinery / Automation Design Engineering. JBRP1_UKTJ